Posted: Fri Jan 21, 2022 4:23 Post subject: New Build - 01/21/2022 - r48141
Welcome to Atheros r48141 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Linksys EA8500...main gateway
DD-WRT v3.0-r48141 std (01/21/22)
Linux 4.9.297 #697 SMP Fri Jan 21 02:30:02 +07 2022 armv7l
GUI install over r48138
38 static DHCP
local DNS
wlan0.1, wlan1.1, VLAN4 on port4 ---> all on guest net via br1
using ath10k VANILLA FW
32GB USB flash as samba share
port range forwarding
OVPN server
unbound
QOS = HFSC CAKE
Dnsmasq (version 2.87test5)
ovpn server (version 2.5.5)
unbound (version 1.14.0)
Netgear WNDR3700 V4
DD-WRT v3.0-r48141 std (01/21/22)
Linux 3.18.140-d6 #134677 Fri Jan 21 07:53:29 +07 2022 mips
GUI install over r48138
switch / OVPN server / samba share 64GB FAT32 USB flash
all ok -- up 'bout 7 minutes
Posted: Fri Jan 21, 2022 11:51 Post subject: 48141
Netgear Nighthawk X10 R9000
Firmware VersionDD-WRT v3.0-r48141 std (01/21/22)
Kernel VersionLinux 4.9.297 #608 SMP Sun Jan 16 15:22:09 +07 2022 armv7l
Current TimeFri, 21 Jan 2022 04:47:29
Uptime 6 min
GUI install over 48138
Reset: No
Issues: All ok
Status: Up and running for 4 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz working (vanilla firmware).
OpenVPN server working.
WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location).
NAS and Samba working
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r48141 std (01/21/22)
Previous/Reset: DD-WRT v3.0-r48138 std (01/17/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: Although the build did load the leases file on reboot, and the Use JFFS2 for client lease DB option was checked, I had to click Apply on the page to get the dnsmasq.leases file to start updating on /jffs. Also, the Active Clients table on the Status, LAN tab had many Hostnames as * until I erased /tmp/dnsmasq.leases. _________________ Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Status: Up and running for 6 hours , basic setup as Gateway, static leases, 2,4GHz, 5Ghz (Vanilla Firmware), USB storage NAS working.
OpenVPN client to Oracle cloud server with PBR working.
WireGuard client to Keepsolid working, WireGuard client for site-to-site setup to own server working.
WireGuard server(backup for one phone), working
Router/Version: Netgear R7800
File/Kernel: DD-WRT v3.0-r48141
Previous/Reset: CLI update / No reset
Mode/Status: Gateway / Working
Setup/Using: Vanilla on 2.4 and DD-WRT on 5GHz, WAN, QoS, Wireguard tunnel, DDNS, DNSmasq.
Issues/Errors: Works fine without errors - uptime 12h
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r48141 std (01/21/22)
Kernel Version: Linux 4.9.297 #699 SMP Fri Jan 21 02:56:27 +07 2022 armv7l
Previous/Reset: r48138 / No Reset, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1,YAMon3.4.7
Services Disabled: WiFi,QoS,ttraff,SFE,Telnet,NAS,Samba
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r48141 std (01/21/22)
Kernel Version: Linux 4.9.297 #699 SMP Fri Jan 21 02:56:27 +07 2022 armv7l
Previous/Reset: r48138 / No Reset, CLI Update
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: Static WAN,IPv6-6to4,WiFi Vannilla,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,SFE,Telnet,NAS,Samba
All running for over 8 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Netgear XR500 - Gateway
Firmware Version: DD-WRT v3.0-r48141 std (01/21/22)
Kernel Version: Linux 4.9.297 #699 SMP Fri Jan 21 02:56:27 +07 2022 armv7l
Temperatures: CPU 51.460 °C / wlan0 54 °C / wlan1 60 °C
Current Time: Fri, 21 Jan 2022 18:49:21
Uptime: 1:02
Reset: No
GUI install over 48138
No issues
Thank you BS and thanks you gurus for your guides and wisdom _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r48141 std)
Kernel: Linux 3.10.108-d11 #99486 Fri Jan 21 05:09:31 +07 2022 mips
Status: working
Reset: No
Notes on configuration:
Client
Errors:
1. 5Ghz wireless light is not on (2.4Ghz light works)
Router: Archer-A7 v5
Firmware: tplink_archer-a7-v5.bin (v3.0-r48141 std)
Kernel: Linux 3.18.140-d6 #134661 Fri Jan 21 07:20:26 +07 2022 mips
Status: Working
Reset: None
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
Errors:
None
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r48141 std)
Kernel: Linux 3.10.108-d11 #99484 Fri Jan 21 04:53:10 +07 2022 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors: