New Build - 01/21/2022 - r48141

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3875

PostPosted: Fri Jan 21, 2022 4:23    Post subject: New Build - 01/21/2022 - r48141 Reply with quote
Welcome to Atheros r48141 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48138 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
Privoxy, iperf3, CAKE, Asterisk, SmartDNS, curl, ProFTPD, Tor, BusyBox, OpenSSL, mac80211, FreeRADIUS, dnsmasq, Unbound, zfs, SoftEther, Squid, zstd
In-kernel Samba (ksmbd 3.4.3++): guest behavior now selectable. • WSD updateANTFS/NTFS3 kernel mode driver+++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 fragattack fixed. • 47032 #3002 TL-WA901NDv2
• 'Assign WAN port to Switch' gone, set Connection Type Disabled. • WebUI MAC Filtering (47184-47205). • Sputnik removed.
• 'Ignore WAN DNS' also ignores WAN domain. • Milkfish removed. • TL-WR841HPv3 support. • R9000 PPPoE fixed (#7491).
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, see UI theme test info thread.
• 401 bad request: Ethernet WebUI -> Wireless -> Basic Settings -> Advanced Settings -> Wireless GUI Access Enable, Save
• Add static or delete DHCP lease from DHCP clients table in Status -> LAN. Upgrades to forwarding delete in NAT / QoS tabs.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5773
Location: Texas

PostPosted: Fri Jan 21, 2022 4:48    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r48141 std (01/21/22)
Linux 4.9.297 #697 SMP Fri Jan 21 02:30:02 +07 2022 armv7l
GUI install over r48138
38 static DHCP
local DNS
wlan0.1, wlan1.1, VLAN4 on port4 ---> all on guest net via br1
using ath10k VANILLA FW
32GB USB flash as samba share
port range forwarding
OVPN server
unbound
QOS = HFSC CAKE

Dnsmasq (version 2.87test5)
ovpn server (version 2.5.5)
unbound (version 1.14.0)

uptime 6:55
all worky very well Smile
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5773
Location: Texas

PostPosted: Fri Jan 21, 2022 5:03    Post subject: Reply with quote
Netgear WNDR3700 V4
DD-WRT v3.0-r48141 std (01/21/22)
Linux 3.18.140-d6 #134677 Fri Jan 21 07:53:29 +07 2022 mips
GUI install over r48138
switch / OVPN server / samba share 64GB FAT32 USB flash
all ok -- up 'bout 7 minutes
mwbuss8
DD-WRT Guru


Joined: 23 Feb 2015
Posts: 730

PostPosted: Fri Jan 21, 2022 7:04    Post subject: Reply with quote
GUI upgrade over r48138 about an hour ago for signature routers. Everything is good so far.

Thanks Devs!

_________________
Current devices:
XR500 - gateway
EA8500 - AP
EA8500 - AP
R7500v2 - AP
R7500v2 - AP
EA8500 - AP & OpenVPN client
OpenMediaVault box for SMB & Emby
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 154
Location: Maharashtra, India

PostPosted: Fri Jan 21, 2022 11:49    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r48141 std (01/21/22)
Kernel: Linux 4.9.297 #699 SMP Fri Jan 21 02:56:27 +07 2022 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using CLI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r48128 std (01/16/22)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, WireGuard, Samba

Status: Working Fine; running vanilla firmware type for 2.4ghz & 5ghz, uptime 12+ Hrs.


Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 74

PostPosted: Fri Jan 21, 2022 11:51    Post subject: 48141 Reply with quote
Netgear Nighthawk X10 R9000
Firmware VersionDD-WRT v3.0-r48141 std (01/21/22)
Kernel VersionLinux 4.9.297 #608 SMP Sun Jan 16 15:22:09 +07 2022 armv7l
Current TimeFri, 21 Jan 2022 04:47:29
Uptime 6 min
GUI install over 48138
Reset: No
Issues: All ok

Thank you BS & Devs.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9594
Location: Netherlands

PostPosted: Fri Jan 21, 2022 11:54    Post subject: Reply with quote
Router Model: Linksys EA8500

Firmware Version: DD-WRT v3.0-r48141 std (01/21/22)

Upgraded from: DD-WRT v3.0-r48138 std (01/17/22)

Reset: No not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz working (vanilla firmware).
OpenVPN server working.
WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location).
NAS and Samba working

Errors: Nothing encountered at this moment

Big Thanks to the devs!!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 666

PostPosted: Fri Jan 21, 2022 13:37    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r48141 std (01/21/22)
Previous/Reset: DD-WRT v3.0-r48138 std (01/17/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: Although the build did load the leases file on reboot, and the Use JFFS2 for client lease DB option was checked, I had to click Apply on the page to get the dnsmasq.leases file to start updating on /jffs. Also, the Active Clients table on the Status, LAN tab had many Hostnames as * until I erased /tmp/dnsmasq.leases.

_________________
Netgear R9000 X10
DD-WRT v3.0-r48810 std (05/06/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
Vanilla Firmware, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 450, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 450, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9594
Location: Netherlands

PostPosted: Fri Jan 21, 2022 16:17    Post subject: Reply with quote
Router Model: Netgear R7800

Firmware Version: DD-WRT v3.0-r48141 std (01/21/22)

Upgraded from: DD-WRT v3.0-r48138 std (01/17/22)

Reset: No, not this time

Status: Up and running for 6 hours , basic setup as Gateway, static leases, 2,4GHz, 5Ghz (Vanilla Firmware), USB storage NAS working.
OpenVPN client to Oracle cloud server with PBR working.
WireGuard client to Keepsolid working, WireGuard client for site-to-site setup to own server working.
WireGuard server(backup for one phone), working

Errors: Nothing encountered yet

Thanks BS!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
giuliomagnifico
DD-WRT User


Joined: 11 Apr 2016
Posts: 448
Location: Italy

PostPosted: Fri Jan 21, 2022 19:08    Post subject: Reply with quote
Router/Version: Netgear R7800
File/Kernel: DD-WRT v3.0-r48141
Previous/Reset: CLI update / No reset
Mode/Status: Gateway / Working
Setup/Using: Vanilla on 2.4 and DD-WRT on 5GHz, WAN, QoS, Wireguard tunnel, DDNS, DNSmasq.
Issues/Errors: Works fine without errors - uptime 12h

Cool
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1739
Location: WCentral Indiana USA

PostPosted: Sat Jan 22, 2022 0:11    Post subject: Reply with quote
Netgear R7500v2
DD-WRT v3.0-r48141 std (01/21/22)
Linux 4.9.297 #698 SMP Fri Jan 21 02:42:04 +07 2022 armv7l

scp ~/firmware.bin :/tmp over47925
No reset

Working fine with Vanilla, wlan0 WDS Sta w/wlan0 VAP & wlan1 AP,
SMB, ProFTPD, Entware, Fat32 & ext2
r45727 override
Cron
ondemand, up_threshold 20

All good.
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1723
Location: Canada

PostPosted: Sat Jan 22, 2022 2:16    Post subject: Reply with quote
Home Main Gateway Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r48141 std (01/21/22)
Kernel Version: Linux 4.9.297 #699 SMP Fri Jan 21 02:56:27 +07 2022 armv7l
Previous/Reset: r48138 / No Reset, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1,YAMon3.4.7
Services Disabled: WiFi,QoS,ttraff,SFE,Telnet,NAS,Samba


Home Main AP Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r48141 std (01/21/22)
Kernel Version: Linux 4.9.297 #699 SMP Fri Jan 21 02:56:27 +07 2022 armv7l
Previous/Reset: r48138 / No Reset, CLI Update
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: Static WAN,IPv6-6to4,WiFi Vannilla,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,SFE,Telnet,NAS,Samba


All running for over 8 hours.


Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r48786 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r48786 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r48786 Std
E3000 - Client Bridge - DDWRT r44483 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r48786 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 62

PostPosted: Sat Jan 22, 2022 2:52    Post subject: Reply with quote
Netgear XR500 - Gateway
Firmware Version: DD-WRT v3.0-r48141 std (01/21/22)
Kernel Version: Linux 4.9.297 #699 SMP Fri Jan 21 02:56:27 +07 2022 armv7l
Temperatures: CPU 51.460 °C / wlan0 54 °C / wlan1 60 °C
Current Time: Fri, 21 Jan 2022 18:49:21
Uptime: 1:02
Reset: No
GUI install over 48138
No issues

Thank you BS and thanks you gurus for your guides and wisdom

_________________
Netgear XR500 - Gateway
R6700 v3 - Client Bridge
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 666

PostPosted: Sat Jan 22, 2022 14:39    Post subject: Reply with quote
Up and running for 25+ hours, no issues at all. Thanks, BrainSlayer and Team! Great build.
_________________
Netgear R9000 X10
DD-WRT v3.0-r48810 std (05/06/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
Vanilla Firmware, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 450, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 450, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1268

PostPosted: Sat Jan 22, 2022 21:56    Post subject: Reply with quote
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r48141 std)
Kernel: Linux 3.10.108-d11 #99486 Fri Jan 21 05:09:31 +07 2022 mips
Status: working
Reset: No
Notes on configuration:

    Client

Errors:


    1. 5Ghz wireless light is not on (2.4Ghz light works)




Router: Archer-A7 v5
Firmware: tplink_archer-a7-v5.bin (v3.0-r48141 std)
Kernel: Linux 3.18.140-d6 #134661 Fri Jan 21 07:20:26 +07 2022 mips
Status: Working
Reset: None
Notes on configuration:

    DNSMasq
    Virtual wireless with bridging x2
    multiple DHCP server

Errors:

    None


Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r48141 std)
Kernel: Linux 3.10.108-d11 #99484 Fri Jan 21 04:53:10 +07 2022 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors:

    None
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum