Posted: Mon Jan 17, 2022 14:42 Post subject: New Build - 01/17/2022 - r48138
Welcome to Atheros r48138 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r48138 std (01/17/22)
Previous/Reset: DD-WRT v3.0-r48128 std (01/16/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: Although the build did load the leases file on reboot, and the Use JFFS2 for client lease DB option was checked, I had to click Apply on the page to get the dnsmasq.leases file to start updating on /jffs. Also, the Active Clients table on the Status, LAN tab had many Hostnames as * until I erased /tmp/dnsmasq.leases. _________________ Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Linksys EA8500...main gateway
DD-WRT v3.0-r48138 std (01/17/22)
Linux 4.9.297 #691 SMP Mon Jan 17 04:48:36 +07 2022 armv7l
GUI install over r48128
all ok
#
Netgear WNDR3700 V4
DD-WRT v3.0-r48138 std (01/17/22)
Linux 3.18.140-d6 #134535 Mon Jan 17 08:31:46 +07 2022 mips
GUI install over r48128
switch / ovpn server / samba share FAT32 16GB
all good
You also have to consider that the table headers have to offer enough space for other languages / translations.
And I don't know what the "Uptime" column needs to be so wide for (a WLAN connection duration of 100,000 days is illusory).
Netgear XR500 - Gateway
Firmware Version: DD-WRT v3.0-r48138 std (01/17/22)
Kernel Version: Linux 4.9.297 #693 SMP Mon Jan 17 05:13:19 +07 2022 armv7l
Temperatures: CPU 51.878 °C / wlan0 55 °C / wlan1 58 °C
Current Time: Mon, 17 Jan 2022 15:03:31
Uptime: 3:35
Reset: No
GUI install over 48128
No issues – seams like my ping times to speed tester have dropped back down from 70 to 35ms
Thank you to everyone involved. _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Status: Up and running for 24 hours , basic setup as Gateway, static leases, 2,4GHz, 5Ghz (Vanilla Firmware), USB storage NAS working.
OpenVPN client to Oracle cloud OpenVPN Access server with PBR working.
WireGuard client to Keepsolid working , WireGuard client for site-to-site setup to own server working.
WireGuard server(backup for one phone), working
Status: Up and running for 24 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz working (vanilla firmware).
OpenVPN server working.
WireGuard server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working
Router/Version: TP-Link Archer C7 V2
File/Kernel: Linux 3.18.140-d6 #134513 Mon Jan 17 07:48:13 +07 2022 mips
Previous/Reset: GUI update over r47800 / No
Mode/Status: Gateway, 5GHz only, vanilla driver, USB drive for /opt and /jffs, experimenting with vlans and bridges
Issues/Errors: None sofar
Thanks BS and all who contributed _________________
1x TP-Link Archer C7 V2.0 r48432 (Primary router at primary location. Former Ziggo repeater)
1x TP-Link Archer C7 V2.0 OpenWrt 21.02.3 (Testing at primary location. Former Ziggo repeater)
1x TP-Link Archer C7 V5.0 r48540 (Secondary router at primary location)
1x TP-Link Archer C7 V5.0 OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WR1043ND V4.0 OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) r48646 (Primary router at secondary location)
1x TP-Link WDR4900 V1.3 (blue leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (blue leds) r47925 (Testing at secondary location)
1x Linksys WRT160NL r48494 (Guest network with QoS at secondary location)
1x Linksys WRT54G V2.0 r14929 (Switched off at secondary location)
1x Linksys WRT54GL V1.1 r14929