New Build - 01/16/2022 - r48128

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sun Jan 16, 2022 12:01    Post subject: New Build - 01/16/2022 - r48128 Reply with quote
Welcome to Atheros r48128 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48081 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
Privoxy, iperf3, CAKE, Asterisk, SmartDNS, curl, ProFTPD, Tor, BusyBox, OpenSSL, mac80211, FreeRADIUS, dnsmasq, Unbound, zfs, SoftEther, Squid
In-kernel Samba (ksmbd 3.4.3+): guest behavior is now selectable. • WSD updateANTFS/NTFS3 kernel mode driver+++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 fragattack fixed. • 47032 #3002 TL-WA901NDv2
• 'Assign WAN port to Switch' gone, set Connection Type Disabled. • WebUI MAC Filtering (47184-47205). • Sputnik removed.
• 'Ignore WAN DNS' also ignores WAN domain. • Milkfish removed. • TL-WR841HPv3 support. • R9000 PPPoE fixed (#7491).
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, see UI theme test info thread.
• 401 bad request: Ethernet WebUI -> Wireless -> Basic Settings -> Advanced Settings -> Wireless GUI Access Enable, Save
• Add static or delete DHCP lease from DHCP clients table in Status -> LAN. Upgrades to forwarding delete in NAT / QoS tabs.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6856
Location: Romerike, Norway

PostPosted: Sun Jan 16, 2022 12:50    Post subject: Reply with quote
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r48128 std (01/16/22)
Kernel Version: Linux 4.9.296 #687 SMP Sun Jan 16 05:27:29 +07 2022 armv7l

Status: Working
Errors: On the syslog screen, the Next/Previous buttons are covered by a horizontal scrollbar.

All 13 channels are still shown where some lower and upper channels are used as extensions channel.
ArjenR49
DD-WRT Guru


Joined: 05 Oct 2008
Posts: 666
Location: Helsinki, Finland / nr. Alkmaar, Netherlands

PostPosted: Sun Jan 16, 2022 13:14    Post subject: Reply with quote
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r48128 std (01/16/22)
Kernel Version: Linux 4.9.296 #687 SMP Sun Jan 16 05:27:29 +07 2022 armv7l

Status: Working

Per Yngve Berg wrote:

Errors: On the syslog screen, the Next/Previous buttons are covered by a horizontal scrollbar.

All 13 channels are still shown where some lower and upper channels are used as extensions channel.


On my R7800, upgraded to r48128, the prev/next buttons on the syslog page appear quite normal.

Whenever I pick a different channel from the list 1 - 13, the lower/upper pull-down button adjusts itself immediately to show lower or upper or both as appropriate without saving or applying.
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Sun Jan 16, 2022 13:41    Post subject: r48128 Reply with quote
Netgear Nighthawk X10 r9000
Firmware VersionDD-WRT v3.0-r48128 std (01/16/22)
Kernel VersionLinux 4.9.296 #606 SMP Fri Jan 7 02:15:56 +07 2022 armv7l
Current TimeSun, 16 Jan 2022 06:34:45
Uptime1 min
GUI install over 48081
Reset:No
No Issues

Thanks BS and devs
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Sun Jan 16, 2022 13:51    Post subject: Reply with quote
ArjenR49 wrote:
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r48128 std (01/16/22)
Kernel Version: Linux 4.9.296 #687 SMP Sun Jan 16 05:27:29 +07 2022 armv7l

Status: Working

Per Yngve Berg wrote:

Errors: On the syslog screen, the Next/Previous buttons are covered by a horizontal scrollbar.

All 13 channels are still shown where some lower and upper channels are used as extensions channel.


On my R7800, upgraded to r48128, the prev/next buttons on the syslog page appear quite normal.

Whenever I pick a different channel from the list 1 - 13, the lower/upper pull-down button adjusts itself immediately to show lower or upper or both as appropriate without saving or applying.


unbelievable how often you have to explain this

and in relation to the syslog
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Sun Jan 16, 2022 14:13    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r48128 std (01/16/22)
Linux 4.9.296 #685 SMP Sun Jan 16 05:04:25 +07 2022 armv7l
GUI install over r48124
all good
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6856
Location: Romerike, Norway

PostPosted: Sun Jan 16, 2022 15:29    Post subject: Reply with quote
@ho1Aetoo

You are right. The Upper/lower adjust after the channel selected. It used to be the opposite way.

The screen shot of your syslog don't show a horizontal scrollbar.

In my browser the iframe is a tad to wide.

Why on earth is this shown using an iframe?
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Sun Jan 16, 2022 16:00    Post subject: Reply with quote
It has been like this for almost 2 years.
That it automatically selects the extension channel after you have selected a channel.

That after saving again all extension channels are displayed is "newer" and I have already reported BS.
Hopefully this will be fixed again.
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sun Jan 16, 2022 16:30    Post subject: Reply with quote
Old habits die hard. Smile I too have been guilty about this, or to totally forget about the channel selection overhaul.

Router/Version: Linksys EA8500 / Box Rev. A00 PCB REV:205(XC) hw_rev=1 hw_ver=XB / r48128 (01/16/22)
File/Kernel: CLI Flash dd-wrt-webupgrade.bin / Linux 4.9.296 #685 SMP Sun Jan 16 05:04:25 +07 2022 armv7l
Previous/Reset: r48068 (01/09/22) / No
Mode/Status: AP Gateway / VaNiLLa Mixed 20 MHz Ch 1 & 149 TX Power 30 dBm Short Preamble ttraff disabled
Issues/Errors: No / No
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Sun Jan 16, 2022 17:30    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r48128 std (01/16/22)
Previous/Reset: DD-WRT v3.0-r48081 std (01/11/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: Although the build did load the leases file on reboot, and the Use JFFS2 for client lease DB option was checked, I had to click Apply on the page to get the dnsmasq.leases file to start updating on /jffs. Also, the Active Clients table on the Status, LAN tab had many Hostnames as * until I erased /tmp/dnsmasq.leases.

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Sun Jan 16, 2022 17:56    Post subject: Reply with quote
Amazing !

It works so good on very old Buffalo WHR-G300N

Router :Buffalo WHR-G300N
Firmware:DD-WRT v3.0-r48128 std (01/16/22)
Kernel :Linux 3.10.108-d11 #99246 Sun Jan 16 07:06:26 +07 2022 mips

Thanks all of you hard-working.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Sun Jan 16, 2022 22:15    Post subject: Reply with quote
Netgear WNDR3700 V4
DD-WRT v3.0-r48128 std (01/16/22)
Linux 3.18.140-d6 #134415 Sun Jan 16 09:57:43 +07 2022 mips
used as switch / ovpn server / samba share 16GB ext2 flash drive
all good
DWCruiser
DD-WRT User


Joined: 15 Aug 2016
Posts: 223
Location: Melbourne, Australia

PostPosted: Mon Jan 17, 2022 3:56    Post subject: Reply with quote
Hi,

Over the last few versions, I noticed that my Netgear R7800 does not SEEM to properly update its Dynamic Domain Name System (DDNS). This results in my repeated failures to remotely connect to its OpenVPN server, from laptop's OpenVPN client.

A manually forced refresh on R7800 to update DDNS indicates that it's updated. But no remote connection trial could get through.

As soon as R7800 is backed down to r47692, I can remotely connect with no problem at all. Not sure what gives?

Would be grateful for help in resolving this issue in order to update beyond r47692 (28th Nov., 2021).

Thank you.

_________________
Life is a journey; travel alone makes it less enjoyable and lonely.
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 229

PostPosted: Mon Jan 17, 2022 5:24    Post subject: Reply with quote
Netgear XR500 - Gateway
Firmware Version: DD-WRT v3.0-r48128 std (01/16/22)
Kernel Version: Linux 4.9.296 #687 SMP Sun Jan 16 05:27:29 +07 2022 armv7l
Current Time: Sun, 16 Jan 2022 21:20:23
Uptime: 11:28
Reset: No
GUI install over 48081
No issues

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Mon Jan 17, 2022 16:40    Post subject: Reply with quote
Per Yngve Berg wrote:
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r48128 std (01/16/22)
Kernel Version: Linux 4.9.296 #687 SMP Sun Jan 16 05:27:29 +07 2022 armv7l

Status: Working
Errors: On the syslog screen, the Next/Previous buttons are covered by a horizontal scrollbar.

All 13 channels are still shown where some lower and upper channels are used as extensions channel.


can you post a screenshot to give me a impression what this is about?

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum