Router/Version: ASUS rt-66u B1
SMP Thu Jan 6 04:02:17 +07 2022 armv7l
Previous: r47822
Reset: no
Issues/Errors: no errors, but router did have an issue with the LEDs getting messed up on the front display. This router flashes with the rt-68u firmware image as I believe they share a motherboard and the 5 ghz LED never functioned on it. However after this flash, I noticed I also lost the 2.4 LED and somehow the power light was flashing for activity.
Tried to reset nvram in webif to see if this would resolve the issue but it did not. Rolled back to r47822 for the time being and LEDs are working as expected. I know BS said a while ago he had trouble with the LEDs on this model, but im not sure if more came to light in the way of controlling them since then.
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r48081 std (01/11/22)
Kernel Version: Linux 4.4.298 #4944 SMP Tue Jan 11 03:43:48 +07 2022 armv7l DD-WRT
Reset: yes
Operating Mode/Setup: Gateway / AP
Previous version: 10-10-2021 build - r47628
Status: [Update] No problem. (Previous: Works well except for DNSmasq: I have some DNS issues).
Update: Previous DNS issues reported with this build was because of a bad WireGuard configuration (thanks egc).
--- ksmbd errors logs ---
Some errors in logs from ksmbd, but share access working well:
Jan 1 01:00:20 eglarest local5.err ksmbd: [ksmbd-manager/1317]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
...
Jan 15 19:51:30 xxxxxx user.info : [ksmbd.mountd] : samba daemon successfully stopped
Jan 15 19:51:30 xxxxxx local5.info ksmbd: [ksmbd-worker/1319]: INFO: Child received signal: 15 (Terminated)
Jan 15 19:51:30 xxxxxx local5.err ksmbd: [ksmbd-manager/1317]: ERROR: WARNING: child process exited abnormally: 1319
Jan 15 19:51:30 xxxxxx local5.err ksmbd: [ksmbd-manager/1317]: ERROR: can't execute kill 1319: No such process
Jan 15 19:51:30 xxxxxx local5.info ksmbd: [ksmbd-manager/1317]: INFO: Exiting. Bye!
--- Current basic R7000 setup ---
- Automatic DHCP WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: Network AP, wl0 (2,4 Ghz) + wl1 (5 Ghz) AC/N-Mixed same SSID + WPA2 AES
- Wireless: Second network on wl0.1 (only 2,4 Ghz) + WPA2 AES + AP Isolation + Net Isolation + additional server (Multiple DHCP Server)
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled
- Syslog: enable, klogd: disable.
- No custom scripts
- USB core + automatic mount /jffs and /opt.
- Samba (force v3.0 to v3.11 with encryption).
- Bittorent server (from Webui).
- UPnP enable.
- Wireguard server enable (from Webui).
Joined: 18 Mar 2014 Posts: 12889 Location: Netherlands
Posted: Sat Jan 15, 2022 19:53 Post subject:
It could be that you have made some setup errors.
As you are setting up a Wireguard server remove the DNS entry and have a look how to setup in the docs.
That was indeed because of a bad WireGuard setup. After disabling WireGuard server, DNS is working perfectly. Thanks for your documentation, I will start over my VPN conf.
