Author
Message
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12887 Location: Netherlands
Posted: Tue Dec 07, 2021 8:57 Post subject:
ho1Aetoo wrote: may also be due to the fact that SFE is not compatible with unbridged VAPs.
I don't know if this has changed in the meantime, but it used to be that SFE was deactivated when unbridged VAPs were configured.
I don't use SFE myself so I don't know the current status.
so test VAP's and SFE at the same time - sounds promising
You are right, unbridged VAPS's will switch off on Atheros but not on Broadcom. At least the last time I tested it some months ago.
When Asked BS about it he answered that SFE is not compatible with unbridged VAP's it does work most of the time but it can go awry with routing/connection tracking so it is better to switch it off.
As to why it only switches off on Atheros and not on Broadcom he did not explain.
(Could also be the wlan <> wl bug) _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top
Sponsor
kernel-panic69 DD-WRT Guru Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Back to top
mrjcd DD-WRT Guru Joined: 31 Jan 2015 Posts: 6290 Location: Texas
Posted: Wed Dec 08, 2021 4:06 Post subject:
mrjcd wrote: Had to get on its power button to bring it back alive ---
Code: mrjcd@daDeb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r47791 std (c) 2021 NewMedia-NET GmbH
Release: 12/07/21
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.34.1 (2021-12-07 03:48:55 +07) built-in shell (ash)
root@EA8500:~# dmesg | grep fast
[ 2.160344] random: fast init done
[ 16.544723] fast-classifier (PBR safe v2.1.6b): starting up
[ 16.544806] fast-classifier: registered
[ 17.374495] fast-classifier: shutting down
[ 18.028046] fast-classifier (PBR safe v2.1.6b): starting up
[ 18.028132] fast-classifier: registered
[ 19.104281] fast-classifier: shutting down
[ 19.363912] fast-classifier (PBR safe v2.1.6b): starting up
[ 19.363995] fast-classifier: registered
[ 19.684874] fast-classifier: shutting down
[ 20.348631] fast-classifier (PBR safe v2.1.6b): starting up
[ 20.348714] fast-classifier: registered
clicke SFE button in webif to 'Disable' / 'Save' & 'Apply Settings'
that worky like susposed to
Code: root@EA8500:~# dmesg | grep fast
[ 2.160344] random: fast init done
[ 16.544723] fast-classifier (PBR safe v2.1.6b): starting up
[ 16.544806] fast-classifier: registered
[ 17.374495] fast-classifier: shutting down
[ 18.028046] fast-classifier (PBR safe v2.1.6b): starting up
[ 18.028132] fast-classifier: registered
[ 19.104281] fast-classifier: shutting down
[ 19.363912] fast-classifier (PBR safe v2.1.6b): starting up
[ 19.363995] fast-classifier: registered
[ 19.684874] fast-classifier: shutting down
[ 20.348631] fast-classifier (PBR safe v2.1.6b): starting up
[ 20.348714] fast-classifier: registered
[ 279.353259] fast-classifier: shutting down
root@EA8500:~# uptime
22:43:08 up 6 min, load average: 0.03, 0.08, 0.05
root@EA8500:~# date
Mon Dec 6 22:43:14 CST 2021
root@EA8500:~#
Connection to ea8500.mrjcd.com closed.
mrjcd@daDeb:~$
iffin you ain't got SFE on just be prepared to do a power off/on iffin you enable it
going back to the recliner now
in the webif ---> Enable ---> SFE all working fine now with r47810
Back to top