New Build - 11/29/2021 - r47695

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3900

PostPosted: Mon Nov 29, 2021 8:26    Post subject: New Build - 11/29/2021 - r47695 Reply with quote
[Welcome]: Marvell r47695 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS or FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https or ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r47692 (mirror)

OpenVPN 2.5.4: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20210606/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!

Notes:
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
MiniDLNACoovaChilliPrivoxyiperf3cakeFreeRADIUSOpenSSLdnsmasqUnboundTorSquidSmartDNSAsteriskBusyBox
In-kernel Samba ksmbd 3.4.2++: default min/max versions revised. • WSD updateANTFS/NTFS3 kernel mode driver+++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" chkbox removed. • MAC Filtering within WebUI fixed (47184-47205). • Sputnik Agent removed.
• "Ignore WAN DNS" also ignores WAN domain. • Milkfish removed.
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded.

Issues:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search Trac tickets & discuss in forum before opening. Before reporting reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 189

PostPosted: Tue Nov 30, 2021 5:14    Post subject: Reply with quote
Router/Version: WRT1900ACSv1 / DD-WRT v3.0-r47695 std (11/29/21)
File/Kernel: CLI webflash / Linux 4.9.291 #2933 SMP Mon Nov 29 01:46:14 +07 2021 armv7l
Previous/Reset: r47656 / No
Mode/Status: Gateway, OpenVPN Client, FreeRADIUS Server, VLANs, VAPs, WPA3 / Uptime 31 minutes
Issues/Errors: Everything's working well, thanks!

_________________
My DD-WRT Routers:
Linksys WRT1900ACS - Marvell (2x): r48646
Netgear R7000 - Broadcom (3x): r47720
Netgear R9000 - Atheros (1x): r47608
PC x86-64 VM - Atheros (1x): r46316
Linksys WRT54G/GS - Broadcom (4x): r44715
crunch
DD-WRT Novice


Joined: 25 Apr 2020
Posts: 11

PostPosted: Wed Dec 01, 2021 15:03    Post subject: Reply with quote
Router/Version: WRT1900ACS/v2
File/Kernel: DD-WRT v3.0-r47695 std (11/29/21)
Previous/Reset: Linksys Firmware / Yes
Status: Gateway / OpenVPN / Up 1 day, 14:07

Issues/Errors: 5g wifi not working on channels above 60 - not thoroughly tested working fine on ch 36
Android/iphone/Win11/Linux/Firestick/Roku working fine so far

5g: AC/N-Mixed , VHT80 (80 MHz) , CH 36 UU (+6)
2.4g: NG-Mixed , Full (20 MHz) , CH 11
kris18890
DD-WRT Novice


Joined: 06 Oct 2011
Posts: 15
Location: Manchester, England

PostPosted: Wed Dec 01, 2021 23:44    Post subject: Reply with quote
Router/Version: WRT1900ACSv2 / DD-WRT v3.0-r47695 std (11/29/21)
File/Kernel: Linux 4.9.291 #2933 SMP Mon Nov 29 01:46:14 +07 2021 armv7l
Previous/Reset: r47656 / No
Mode/Status: Gateway, WPA2, DynDNS server / Uptime 31 minutes
Issues/Errors: Everything's working well, thanks! I found PBPhoto's settings documented in the 10/20/2021 - r47581 build thread, particularly the ones about "wireless network mode" & "sensitivity rage" successful

_________________
All the best,

Chris Cool

My DD-WRT Routers:
Linksys/Marvell WRT1900ACSv2 - bitchbox (gateway) (r47942 - daily use)
Linksys/Marvell WRT1900ACSv1 - shelleybox (AP only) (r44048 - daily use)
Linksys/Marvell WRT1900ACSv1 - cookiejar (gateway) (r47942 - daily use)
Linksys/Marvell WRT1900ACv1 - coffeejar (AP only) (r47942 - daily use)
Linksys/Marvell WRT1900ACv1 - teajar (AP only) (r47942 - daily use)
Linksys/Marvell WRT1900ACSv1 - magicbox (gateway) (r43516 - not in use/in storage)
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 189

PostPosted: Thu Dec 02, 2021 1:04    Post subject: Reply with quote
crunch wrote:
Issues/Errors: 5g wifi not working on channels above 60 - not thoroughly tested working fine on ch 36 ... 5g: AC/N-Mixed , VHT80 (80 MHz) , CH 36 UU (+6)


Mine's been up for almost 2 days, and 5 GHz wifi seems to be working just fine despite city congestion:
Radio
Radio is On
Mode
AP
Network
AC/N-Mixed
SSID
********
Channel
161 (5805 MHz HT20)
Busy Time
2172934 ms
Active Time
4631782 ms
Channel Quality
54%
TX Power
15 dBm
Rate
Auto
ACK Timing
N/A
Encryption - Interface wlan0
Enabled, WPA3-EAP

_________________
My DD-WRT Routers:
Linksys WRT1900ACS - Marvell (2x): r48646
Netgear R7000 - Broadcom (3x): r47720
Netgear R9000 - Atheros (1x): r47608
PC x86-64 VM - Atheros (1x): r46316
Linksys WRT54G/GS - Broadcom (4x): r44715
crunch
DD-WRT Novice


Joined: 25 Apr 2020
Posts: 11

PostPosted: Thu Dec 02, 2021 20:27    Post subject: Reply with quote
o2bad455:

I tried ch157 and it does work but high channels are very busy here (my channels only go up to 157). Channels in the lower hundreds don't work. Ch36 is good for me.

Why TX power at 15?
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 189

PostPosted: Thu Dec 02, 2021 22:13    Post subject: Reply with quote
crunch wrote:
o2bad455:

I tried ch157 and it does work but high channels are very busy here (my channels only go up to 157). Channels in the lower hundreds don't work. Ch36 is good for me.

Why TX power at 15?


I just tried channel 108 (randomly chosen from the lower hundreds) and it's working fine for me (including to post this reply). I generally use the autochannel setting, which works a charm on Marvell hardware. One difference in our configs is that you're using width 80 while I'm at 20 (too much interference here for 40, much less 80). Could local interference be your issue?

As for TX power, this unit's in an urban high-rise environment. I've tuned TX power and other parameters to meet my needs while minimizing risk (e.g., discourage casual hackers, don't cook the pets or annoy the neighbors, etc.). I could probably get away with single digit power on the same floor (well, I know 12 worked reliably), but needed 15 to reliably get it on other floors with stock antennas. I don't usually need a signal outdoors, but have been known to adjust config parameters and swap specialized and/or redirect antennas when I do. These days, I actually have a dedicated older unit already set up, which I simply plug and point when I occasionally want long range.

_________________
My DD-WRT Routers:
Linksys WRT1900ACS - Marvell (2x): r48646
Netgear R7000 - Broadcom (3x): r47720
Netgear R9000 - Atheros (1x): r47608
PC x86-64 VM - Atheros (1x): r46316
Linksys WRT54G/GS - Broadcom (4x): r44715
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum