Posted: Mon Nov 29, 2021 8:27 Post subject: New Build - 11/29/2021 - r47695
[Welcome]: Broadcom r47695 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootwas fixed for unbridged VAPs (40562-40566). Effective startup commands: see discussion thread.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search Trac tickets & discuss in forum before opening. Before reporting reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Posted: Mon Nov 29, 2021 13:54 Post subject: Minor Annoyance
Router/Version: EA-6350 - Broadcom Northstar
Firmware: DD-WRT v3.0-r47692 std (11/29/21)
Kernel: Linux 4.4.292 #4445 SMP Wed Nov 17 13:06:24 +07 2021 armv7
Previous: r47510
Update Method: GUI
Mode/Status: AP/OK
Reset: No
Issues/Errors: None, except as explained below.
Great work. Thanks to all who contributed and make this great firmware.
One issue that has annoyed me is that if the router is rebooted, wl0 (2.4GHz) is either not broadcast or reverts to Wireless Security "Disabled" (although the GUI still shows Radio is "On" and "WPA2-PSK"). The Wireless Security GUI "Apply Settings" button must be pressed to enable wl0 and the encryption for wl0. This is not a new issue and has been present in older builds.
Added: The router rebooted during the night maybe due to loss of ISP and Keep Alive. wl0 wireless security went to "Disabled" and had to be enabled by using the procedure above. Keep Alive now disabled. Reverted to r47510.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r47695 std (11/29/21)
Kernel: Linux 4.4.293 #4478 SMP Sun Nov 28 09:24:01 +07 2021 armv7l
Mode: Gateway, Wireless AP
Reset: No
Previous : r47692
Upgrade: Web
Temperatures: CPU 59.7 °C / WL0 54.5 °C / WL1 53.8 °C
Uptime 15 Minutes
Router/Version: Linksys WRT54GS v1.1
File/Kernel: DD-WRT v3.0-r47695 mini (11/29/21) dd-wrt.v24_mini_wrt54gs.bin
Linux 2.4.37 #67223 Mon Nov 29 01:35:12 +07 2021 mips
Previous/Reset: DD-WRT v24-sp2 (10/10/09) micro - build 13064 (Yes, that old!) / No Reset
Mode/Status: Seem to be working normally
Issues/Errors: JFFS2 support.
When I enable JFFS2 support and select "Clean Internal Flash Storage" enable. After the flash storage was formatted, it also erased all HTML pages. Rebooted the router, same result. Only get the pink 404 Error page.
Fix(?)
Well, go back to Serial/CFE recovery, flash the really old dd-wrt firmware (still won't boot with the latest micro), then upgrade to the latest micro bin. This time, it shows JFFS is enabled and with
Code:
Total / Free Size 4,849.66 kB / 4,190.21 kB
SSH into it, and appear OK
Code:
root@DD-WRT:/jffs# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 2.1M 2.1M 0 100% /
/dev/root 2.1M 2.1M 0 100% /
/dev/mtdblock/4 4.6M 644.0K 4.0M 14% /jffs
[ADDED]
Problem #2: Port 1 not usable
Port 1 LED is always on even without any cable plugged into it. Plugging a cable doesn't give a connection.
Unsure about those VLAN 16000 18000 19000 20000, that's new news to me...
[ADDED]
Problem #3: Unstable(?) After rebooting a few times, it no longer responds. Just before the last reboot, CPU usage was very high, waited for over 5 minutes still the same. 'top' shows
This was a bricked router given to me, I think previously there is a OpenWRT (or attempt to install) on it. I have to use Serial/CFE recovery method to TFTP some sort of working firmware to bring it back to life. That's why the 'previous' version is so old. (Tried to flash r47695 micro bin file via TFTP doesn't boot)
On a different note, tried to 'flash' the std-generic after, it won't boot. (So I am staying with mini for now)
In case someone is interested what happened with std bin...
Code:
Starting program at 0x80001000
CPU ProcId is: 0x00029007, options: 0x0000004d
Linux version 2.4.37 (root@linux) (gcc version 10.2.0 (GCC) ) #67225 Mon Nov 29 01:39:49 +07 2021
initial scc = 0x5001
map 0x18001000 to 0xB8001000
map 0x18002000 to 0xB8002000
map 0x18003000 to 0xB8003000
map 0x18004000 to 0xB8004000
map 0x18005000 to 0xB8005000
map 0x18006000 to 0xB8006000
map 0x18007000 to 0xB8007000
init SB_CC
core revision 9
add uart0 at B8000300
add uart1 at B8000400
found 64kb nvram
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Disabled
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:02.0 to 64
PCI: Setting latency timer of device 00:01.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4320
map 0x18000000 to 0xB8000000
map 0x18002000 to 0xB8002000
map 0x18003000 to 0xB8003000
map 0x18004000 to 0xB8004000
map 0x18005000 to 0xB8005000
map 0x18006000 to 0xB8006000
map 0x18007000 to 0xB8007000
PPPoL2TP kernel driver, V0.13
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x20000,blocks=64
Using buffer write method
Flash device: 0x800000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x2d9f79
partition size = 3099648
Updating TRX offsets and length:
old trx = [0x0000001c, 0x00000a34, 0x000cb400], len=0x003a6000 crc32=0xef13a24d
new trx = [0x0000001c, 0x00000a34, 0x000cb400], len=0x003c0000 crc32=0xe8ec7ae2
Done
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007e0000 : "linux"
0x0010b400-0x00400000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007e0000-0x00800000 : "nvram"
0x00400000-0x007e0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
[init] : starting devinit
SQUASHFS error: lzma returned unexpected result 0x1
SQUASHFS error: Unable to read fragment cache block [1a2874]
SQUASHFS error: Unable to read page, block 1a2874, size a972
startservice: '/usr/lib/libwireless.so' is not an ELF file
startservice: can't load library 'libwireless.so'
cannot open /proc/sys/kernel/sysrq
[init] : no previous bootfails detected! (all ok)
ledtool: '/usr/lib/libwireless.so' is not an ELF file
ledtool: can't load library 'libwireless.so'
[init] : starting Architecture code for broadcom
startservice: '/usr/lib/libwireless.so' is not an ELF file
startservice: can't load library 'libwireless.so'
startservice: '/usr/lib/libwireless.so' is not an ELF file
startservice: can't load library 'libwireless.so'
startservice: '/usr/lib/libwireless.so' is not an ELF file
startservice: can't load library 'libwireless.so'
Compare to the mini bin when booted... (Only include the last few lines that seems to get std hang)
Code:
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
[init] : starting devinit
cannot open /proc/sys/net/core/default_qdisc
done
cannot open /proc/sys/kernel/sysrq
[init] : no previous bootfails detected! (all ok)
[init] : starting Architecture code for broadcom
boardnum 42
boardtype 0x0708
boardrev 0x10
Booting device: Linksys WRT54G/GL/GS
roboswitch: Probing device eth0: found a 5325!
boardflags are 0x0318
[watchdog] : daemon successfully started
Last edited by dkca on Tue Nov 30, 2021 4:21; edited 4 times in total
Joined: 06 Jun 2006 Posts: 7463 Location: Dresden, Germany
Posted: Mon Nov 29, 2021 22:00 Post subject:
dkca wrote:
Router/Version: Linksys WRT54GS v1.1
File/Kernel: DD-WRT v3.0-r47695 mini (11/29/21) dd-wrt.v24_mini_wrt54gs.bin
Linux 2.4.37 #67223 Mon Nov 29 01:35:12 +07 2021 mips
Previous/Reset: DD-WRT v24-sp2 (10/10/09) micro - build 13064 (Yes, that old!) / No Reset
Mode/Status: Seem to be working normally
Issues/Errors: JFFS2 support.
When I enable JFFS2 support and select "Clean Internal Flash Storage" enable. After the flash storage was formatted, it also erased all HTML pages. Rebooted the router, same result. Only get the pink 404 Error page.
Fix(?)
Well, go back to Serial/CFE recovery, flash the really old dd-wrt firmware (still won't boot with the latest micro), then upgrade to the latest micro bin. This time, it shows JFFS is enabled and with
Code:
Total / Free Size 4,849.66 kB / 4,190.21 kB
SSH into it, and appear OK
Code:
root@DD-WRT:/jffs# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 2.1M 2.1M 0 100% /
/dev/root 2.1M 2.1M 0 100% /
/dev/mtdblock/4 4.6M 644.0K 4.0M 14% /jffs
====
This was a bricked router given to me, I think previously there is a OpenWRT (or attempt to install) on it. I have to use Serial/CFE recovery method to TFTP some sort of working firmware to bring it back to life. That's why the 'previous' version is so old. (Tried to flash r47695 micro bin file via TFTP doesn't boot)
On a different note, tried to 'flash' the std-generic after, it won't boot. (So I am staying with mini for now)
In case someone is interested what happened with std bin...
Code:
Starting program at 0x80001000
CPU ProcId is: 0x00029007, options: 0x0000004d
Linux version 2.4.37 (root@linux) (gcc version 10.2.0 (GCC) ) #67225 Mon Nov 29 01:39:49 +07 2021
initial scc = 0x5001
map 0x18001000 to 0xB8001000
map 0x18002000 to 0xB8002000
map 0x18003000 to 0xB8003000
map 0x18004000 to 0xB8004000
map 0x18005000 to 0xB8005000
map 0x18006000 to 0xB8006000
map 0x18007000 to 0xB8007000
init SB_CC
core revision 9
add uart0 at B8000300
add uart1 at B8000400
found 64kb nvram
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Disabled
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:02.0 to 64
PCI: Setting latency timer of device 00:01.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4320
map 0x18000000 to 0xB8000000
map 0x18002000 to 0xB8002000
map 0x18003000 to 0xB8003000
map 0x18004000 to 0xB8004000
map 0x18005000 to 0xB8005000
map 0x18006000 to 0xB8006000
map 0x18007000 to 0xB8007000
PPPoL2TP kernel driver, V0.13
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x20000,blocks=64
Using buffer write method
Flash device: 0x800000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x2d9f79
partition size = 3099648
Updating TRX offsets and length:
old trx = [0x0000001c, 0x00000a34, 0x000cb400], len=0x003a6000 crc32=0xef13a24d
new trx = [0x0000001c, 0x00000a34, 0x000cb400], len=0x003c0000 crc32=0xe8ec7ae2
Done
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007e0000 : "linux"
0x0010b400-0x00400000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007e0000-0x00800000 : "nvram"
0x00400000-0x007e0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
[init] : starting devinit
SQUASHFS error: lzma returned unexpected result 0x1
SQUASHFS error: Unable to read fragment cache block [1a2874]
SQUASHFS error: Unable to read page, block 1a2874, size a972
startservice: '/usr/lib/libwireless.so' is not an ELF file
startservice: can't load library 'libwireless.so'
cannot open /proc/sys/kernel/sysrq
[init] : no previous bootfails detected! (all ok)
ledtool: '/usr/lib/libwireless.so' is not an ELF file
ledtool: can't load library 'libwireless.so'
[init] : starting Architecture code for broadcom
startservice: '/usr/lib/libwireless.so' is not an ELF file
startservice: can't load library 'libwireless.so'
startservice: '/usr/lib/libwireless.so' is not an ELF file
startservice: can't load library 'libwireless.so'
startservice: '/usr/lib/libwireless.so' is not an ELF file
startservice: can't load library 'libwireless.so'
Compare to the mini bin when booted... (Only include the last few lines that seems to get std hang)
Code:
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
[init] : starting devinit
cannot open /proc/sys/net/core/default_qdisc
done
cannot open /proc/sys/kernel/sysrq
[init] : no previous bootfails detected! (all ok)
[init] : starting Architecture code for broadcom
boardnum 42
boardtype 0x0708
boardrev 0x10
Booting device: Linksys WRT54G/GL/GS
roboswitch: Probing device eth0: found a 5325!
boardflags are 0x0318
[watchdog] : daemon successfully started
your flash memory is broken or something went wrong while flashing. no dd-wrt fault
SQUASHFS error: lzma returned unexpected result 0x1
SQUASHFS error: Unable to read fragment cache block [1a2874]
SQUASHFS error: Unable to read page, block 1a2874, size a972
but for micro. this works. i have it running here. but you have to consider one important thing. micro has no serial output. it runs silent _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7463 Location: Dresden, Germany
Posted: Mon Nov 29, 2021 22:16 Post subject:
maybe the std firmware was slightly oversized. this issue will be resolved with next version _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47695 std (11/29/21)
Kernel: Linux 4.4.293 #4478 SMP Sun Nov 28 09:24:01 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound, CTF & FA Enabled. NAT/QoS Off
Reset: No
Previous : r47692
Upgrade: Web without reset
Temperatures CPU 80.2 °C / WL0 manuel turn off /WL1 56.7 °C
Load: 0.05, 0.04, 0.02
Uptime 8h.
Firmware: v3.0-r47695 std (11/29/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.293 #4478 SMP Sun Nov 28 09:24:01 +07 2021 armv7l
Previous: v3.0-r47692 std (11/28/21)
Mode/Status: AP wired and wireless / Up and running for 24 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 58.0 °C / WL0 45.0 °C / WL1 50.3 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps). Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47695 std (11/29/21)
Kernel Version: Linux 4.4.293 #4478 SMP Sun Nov 28 09:24:01 +07 2021 armv7l
Previous/Reset: r47644 / No, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,SFE,SSH,Syslog
Services Disabled: WiFi,QoS,ttraff,Telnet,NAS,Samba
OffSite #1
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47695 std (11/29/21)
Kernel Version: Linux 4.4.293 #4478 SMP Sun Nov 28 09:24:01 +07 2021 armv7l
Previous/Reset: r47644 / No, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.0,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba
All running for over 30 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531