Posted: Mon Nov 29, 2021 8:25 Post subject: New Build - 11/29/2021 - r47695
[Welcome]: Atheros r47695 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search Trac tickets & discuss in forum before opening. Before reporting reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
(1) Incoming & Outgoing logs show nothing (not a new issue)
(2) Although the build did load the leases file on reboot, I had to uncheck Use JFFS2 for client lease DB, Apply, Reboot, re-check and Apply & Reboot to get leases to start updating to /jffs.
Thanks, BS & Team!
Update: I found I had to manually delete /tmp/dnsmasq.leases to get this build to start writing to /jffs after I performed the steps above. _________________ Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r47695 std (11/29/21)
Kernel Version: Linux 4.9.291 #550 SMP Mon Nov 29 01:33:06 +07 2021 armv7l
Previous/Reset: r47644 / NO, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.0,YAMon3.4.7
Services Disabled: WiFi,QoS,ttraff,SFE,Telnet,NAS,Samba
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r47695 std (11/29/21)
Kernel Version: Linux 4.9.291 #550 SMP Mon Nov 29 01:33:06 +07 2021 armv7l
Previous/Reset: r47644 / NO, CLI Update
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: Static WAN,IPv6-6to4,WiFi Vannilla,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.0
Services Disabled: QoS,ttraff,SFE,Telnet,NAS,Samba
Had this build installed over 2 days made configuration changes and uptime is over 6 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531