Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r47656 std)
Kernel: Linux 3.10.108-d11 #94366 Thu Nov 18 03:15:33 +07 2021 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors:
Are your ethernet ports working properly on this device?
KP, just for you I hooked the device up to the internet and connected a few devices through wired lan connections. Everything worked fine... I was able to connect Lan-to-lan devices and the devices were able to update and access internet fine... is there something specific you are looking for? I did not configure VLANs or anything like that, nor did I do any speed tests.
Joined: 08 May 2018 Posts: 14242 Location: Texas, USA
Posted: Mon Nov 22, 2021 19:16 Post subject:
I guess I have to re-answer you since some folks got a little too carried away with their aisle 5 cleanup. I was inquiring due to another thread about another device that has the same ethernet switch (RealTek) that apparently has a hardware failure. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 12 Jun 2007 Posts: 32 Location: Aachen, Germany
Posted: Wed Nov 24, 2021 9:28 Post subject: Not good for R7000P - Good for Archer C7 v4
Router: R7000P
Firmware: v3.0-r47656 std
Status: Working
Reset: None
Notes on configuration: Used for Wifi and vlans on LAN and WLAN
Errors:
all Wifi Interfaces are highly unstable. All connections drop out after view seconds...
DHCP leases aren't presented over WiFi. Might be a consequence of the Wifi weakness..
created VAP Interface for 5GHz Band doesn't show up under Network Configuration (supposed to be wl1.1). For 2.4GHZ Band wl0.1 showed up.
Router: Archer C7 v4
Firmware: v3.0-r47656 std
Status: Working
Reset: None
Notes on configuration: Used for Wifi and vlans on LAN and WLAN
Errors: so far none. All working _________________ |2e4per