OpenVPN Problem Startreihenfolge Dienste (cyberghostvpn)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC basierende Hardware
Author Message
Thorsten77099
DD-WRT Novice


Joined: 18 Nov 2021
Posts: 4

PostPosted: Thu Nov 18, 2021 12:44    Post subject: OpenVPN Problem Startreihenfolge Dienste (cyberghostvpn) Reply with quote
Hallo Zusammen,

ich habe den Netgear 7000 mit dem dd-wrt ( DD-WRT v3.0-r47644 std (11/15/21) geflashed und möchte damit ein Routing zu cyberghostvpn machen.
Dazu habe ich unter Servie/VPN den Client wie folgt konfiguriert.

Das Problem ist, er versucht OpenVPN zu starten bevor WAN-UP ist und natürlich existiert auch noch keine gültige Zeit vom NTP-Server. Auch ist der Username/Passwort was ich über Administration/Commands/Startup in die Datei key.txt pipe noch nicht vorhanden wenn ich NICHT den Username und PW in der Oberfläche verwende.

Ich müßte also den Start von OpenVPN nach hinten schieben wenn der Zeitserver gesetzt ist und das WAN Interface fertig ist.

Oder liege ich hier falsch??? Jedenfalls funktioniert der start nach dem Reboot nicht.

Geht man in das WEB-Menü unter VPN und drückt "Apply Settings" (ohne etwas verändert zu haben) wird wohl der Dienst neu gestartet und es funktioniert.

Wer kann helfen?

Danke
Gruß
Thorsten


Syslog (nach reboot):
Jan 1 01:00:09 netgearr7000 syslog.info syslogd started: BusyBox v1.34.1
Jan 1 01:00:09 netgearr7000 user.info : [resetbutton] : resetbutton daemon successfully started
Jan 1 01:00:09 netgearr7000 user.info : [bridge] : bridge br0 successfully added
Jan 1 01:00:10 netgearr7000 daemon.info mstpd[707]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Jan 1 01:00:10 netgearr7000 daemon.info mstpd[707]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Jan 1 01:00:10 netgearr7000 user.info : [bridge] : interface vlan1 successfully added to bridge br0
Jan 1 01:00:11 netgearr7000 user.info : [bridge] : interface eth1 successfully added to bridge br0
Jan 1 01:00:16 netgearr7000 user.info : [bridge] : interface eth2 successfully added to bridge br0
Jan 1 01:00:16 netgearr7000 user.info : [syslogd] : syslog daemon successfully stopped
Jan 1 01:00:17 netgearr7000 user.info : [telnetd] : daemon successfully started
Jan 1 01:00:17 netgearr7000 syslog.info syslogd exiting
Jan 1 01:00:17 netgearr7000 syslog.info syslogd started: BusyBox v1.34.1
Jan 1 01:00:17 netgearr7000 user.info : [wland] : daemon successfully started
Jan 1 01:00:17 netgearr7000 user.info : [openvpn] : OpenVPN daemon (Client) starting/restarting...
Jan 1 01:00:17 netgearr7000 user.info : [cron] : daemon successfully started
Jan 1 01:00:17 netgearr7000 cron.info cron[1004]: (CRON) STARTUP (fork ok)
Jan 1 01:00:17 netgearr7000 user.info root: WireGuard number of non failed tunnels in fail set: 0
Jan 1 01:00:17 netgearr7000 daemon.info dnsmasq[1017]: started, version 2.86 DNS disabled
Jan 1 01:00:17 netgearr7000 daemon.info dnsmasq[1017]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth cryptohash DNSSEC loop-detect no-inotify no-dumpfile
Jan 1 01:00:17 netgearr7000 daemon.info dnsmasq-dhcp[1017]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 1d
Jan 1 01:00:17 netgearr7000 user.info : [dnsmasq] : daemon successfully started
Jan 1 01:00:18 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully started
Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1003]: DEPRECATED OPTION: ncp-disable. Disabling cipher negotiation is a deprecated debug feature that will be removed in OpenVPN 2.6
Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1003]: NOTE: debug verbosity (--verb 7) is enabled but this build lacks debug support.
Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1003]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1003]: WARNING: file '/tmp/openvpncl/client.key' is group or others accessible
Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1003]: WARNING: file '/tmp/openvpncl/credentials' is group or others accessible
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1003]: Current Parameter Settings:
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1003]: config = '/tmp/openvpncl/openvpn.conf'
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1003]: mode = 0
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1003]: NOTE: --mute triggered...
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1003]: 233 variation(s) on previous 3 message(s) suppressed by --mute
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1003]: OpenVPN 2.5.4 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Nov 15 2021
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1003]: library versions: OpenSSL 1.1.1l 24 Aug 2021, LZO 2.09
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1086]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:16
Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1086]: WARNING: --ping should normally be used with --ping-restart or --ping-exit
Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1086]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1086]: WARNING: Your certificate is not yet valid!
Jan 1 01:00:18 netgearr7000 daemon.notice openvpn[1086]: Control Channel MTU parms [ L:1623 D:1210 EF:40 EB:0 ET:0 EL:3 ]
Jan 1 01:00:19 netgearr7000 user.info : [dropbear] : ssh daemon successfully started
Jan 1 01:00:19 netgearr7000 authpriv.info dropbear[1139]: Running in background
Jan 1 01:00:19 netgearr7000 daemon.info httpd[1089]: [httpd] : httpd server started at port 80
Jan 1 01:00:19 netgearr7000 user.info : [httpd] : http daemon successfully started
Jan 1 01:00:19 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully started
Jan 1 01:00:19 netgearr7000 user.info : [ttraff] : traffic counter daemon successfully started
Jan 1 01:00:19 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully stopped
Jan 1 01:00:20 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully started
Jan 1 01:00:20 netgearr7000 user.info : [wland] : daemon successfully stopped
Jan 1 01:00:20 netgearr7000 user.info : [wland] : daemon successfully started
System Log
Jan 1 01:00:20 netgearr7000 user.info : [wan] : WAN is up. IP: 10.0.1.160
Jan 1 01:00:20 netgearr7000 user.info : [dnsmasq] : daemon successfully stopped
Jan 1 01:00:20 netgearr7000 daemon.info dnsmasq[1017]: exiting on receipt of SIGTERM
Jan 1 01:00:20 netgearr7000 daemon.info dnsmasq[1349]: started, version 2.86 DNS disabled
Jan 1 01:00:20 netgearr7000 daemon.info dnsmasq[1349]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth cryptohash DNSSEC loop-detect no-inotify no-dumpfile
Jan 1 01:00:20 netgearr7000 daemon.info dnsmasq-dhcp[1349]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 1d
Jan 1 01:00:20 netgearr7000 user.info : [dnsmasq] : daemon successfully started
Jan 1 01:00:20 netgearr7000 user.info : [openvpn] : OpenVPN daemon (Client) successfully stopped
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: Data Channel MTU parms [ L:1623 D:1450 EF:123 EB:406 ET:0 EL:3 ]
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: crypto_adjust_frame_parameters: Adjusting frame parameters for crypto by 68 bytes
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: calc_options_string_link_mtu: link-mtu 1623 -> 1571
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: crypto_adjust_frame_parameters: Adjusting frame parameters for crypto by 68 bytes
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: NOTE: --mute triggered...
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: 1 variation(s) on previous 3 message(s) suppressed by --mute
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: Local Options String (VER=V4): 'V4,dev-type tun,link-mtu 1571,tun-mtu 1500,proto TCPv4_CLIENT,cipher AES-256-CBC,auth SHA256,keysize 256,key-method 2,tls-client'
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu 1571,tun-mtu 1500,proto TCPv4_SERVER,cipher AES-256-CBC,auth SHA256,keysize 256,key-method 2,tls-server'
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: TCP/UDP: Preserving recently used remote address: [AF_INET]84.17.49.37:443
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: Socket Buffers: R=[131072->131072] S=[131072->131072]
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: Attempting to establish TCP connection with [AF_INET]84.17.49.37:443 [nonblock]
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: TCP connection established with [AF_INET]84.17.49.37:443
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1086]: --mtu-disc is not supported on this OS
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: TCP_CLIENT link local: (not bound)
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: TCP_CLIENT link remote: [AF_INET]84.17.49.37:443
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: TCP/UDP: Closing socket
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1086]: SIGTERM[hard,init_instance] received, process exiting
Jan 1 01:00:21 netgearr7000 user.info : [openvpn] : General Killswitch for OpenVPN removed in 3 using wanface vlan2
Jan 1 01:00:21 netgearr7000 user.info : [openvpn] : OpenVPN daemon (Client) starting/restarting...
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1375]: DEPRECATED OPTION: ncp-disable. Disabling cipher negotiation is a deprecated debug feature that will be removed in OpenVPN 2.6
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1375]: NOTE: debug verbosity (--verb 7) is enabled but this build lacks debug support.
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1375]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1375]: WARNING: file '/tmp/openvpncl/client.key' is group or others accessible
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1375]: WARNING: file '/tmp/openvpncl/credentials' is group or others accessible
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1375]: Current Parameter Settings:
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1375]: config = '/tmp/openvpncl/openvpn.conf'
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1375]: mode = 0
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1375]: NOTE: --mute triggered...
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1375]: 233 variation(s) on previous 3 message(s) suppressed by --mute
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1375]: OpenVPN 2.5.4 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Nov 15 2021
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1375]: library versions: OpenSSL 1.1.1l 24 Aug 2021, LZO 2.09
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:16
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1377]: WARNING: --ping should normally be used with --ping-restart or --ping-exit
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1377]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1377]: WARNING: Your certificate is not yet valid!
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: Control Channel MTU parms [ L:1623 D:1210 EF:40 EB:0 ET:0 EL:3 ]
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: Data Channel MTU parms [ L:1623 D:1450 EF:123 EB:406 ET:0 EL:3 ]
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: crypto_adjust_frame_parameters: Adjusting frame parameters for crypto by 68 bytes
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: calc_options_string_link_mtu: link-mtu 1623 -> 1571
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: crypto_adjust_frame_parameters: Adjusting frame parameters for crypto by 68 bytes
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: 1 variation(s) on previous 3 message(s) suppressed by --mute
System Log
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: Local Options String (VER=V4): 'V4,dev-type tun,link-mtu 1571,tun-mtu 1500,proto TCPv4_CLIENT,cipher AES-256-CBC,auth SHA256,keysize 256,key-method 2,tls-client'
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu 1571,tun-mtu 1500,proto TCPv4_SERVER,cipher AES-256-CBC,auth SHA256,keysize 256,key-method 2,tls-server'
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP/UDP: Preserving recently used remote address: [AF_INET]84.17.49.51:443
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: Socket Buffers: R=[131072->131072] S=[131072->131072]
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: Attempting to establish TCP connection with [AF_INET]84.17.49.51:443 [nonblock]
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP connection established with [AF_INET]84.17.49.51:443
Jan 1 01:00:21 netgearr7000 daemon.warn openvpn[1377]: --mtu-disc is not supported on this OS
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT link local: (not bound)
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT link remote: [AF_INET]84.17.49.51:443
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [14] to [AF_INET]84.17.49.51:443: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 [ ] pid=0 DATA len=0
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT READ [26] from [AF_INET]84.17.49.51:443: P_CONTROL_HARD_RESET_SERVER_V2 kid=0 [ 0 ] pid=0 DATA len=0
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TLS: Initial packet from [AF_INET]84.17.49.51:443, sid=330eba9a 25e4a944
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [22] to [AF_INET]84.17.49.51:443: P_ACK_V1 kid=0 [ 0 ]
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [291] to [AF_INET]84.17.49.51:443: P_CONTROL_V1 kid=0 [ ] pid=1 DATA len=277
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT READ [1196] from [AF_INET]84.17.49.51:443: P_CONTROL_V1 kid=0 [ 1 ] pid=1 DATA len=1170
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: 7 variation(s) on previous 3 message(s) suppressed by --mute
Jan 1 01:00:21 netgearr7000 daemon.err openvpn[1377]: VERIFY ERROR: depth=1, error=certificate is not yet valid: C=RO, L=Bucharest, O=CyberGhost S.A., CN=CyberGhost Root CA, emailAddress=info@cyberghost.ro, serial=11264658999527879867
Jan 1 01:00:21 netgearr7000 daemon.err openvpn[1377]: OpenSSL: error:1416F086:lib(20):func(367):reason(134)
Jan 1 01:00:21 netgearr7000 daemon.err openvpn[1377]: TLS_ERROR: BIO read tls_read_plaintext error
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: 2 variation(s) on previous 3 message(s) suppressed by --mute
Jan 1 01:00:21 netgearr7000 daemon.err openvpn[1377]: Fatal TLS error (check_tls_errors_co), restarting
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: TCP/UDP: Closing socket
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: SIGUSR1[soft,tls-error] received, process restarting
Jan 1 01:00:21 netgearr7000 daemon.notice openvpn[1377]: Restart pause, 5 second(s)
Jan 1 01:00:22 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully stopped
Jan 1 01:00:22 netgearr7000 user.info root: WireGuard number of non failed tunnels in fail set: 0
Jan 1 01:00:22 netgearr7000 user.info : [vpn modules] : vpn modules successfully unloaded
Jan 1 01:00:22 netgearr7000 user.info : [vpn modules] : nf_conntrack_proto_gre successfully loaded
Jan 1 01:00:22 netgearr7000 user.info : [vpn modules] : nf_nat_proto_gre successfully loaded
Jan 1 01:00:22 netgearr7000 user.info : [vpn modules] : nf_conntrack_pptp successfully loaded
Jan 1 01:00:22 netgearr7000 user.info : [vpn modules] : nf_nat_pptp successfully loaded
Jan 1 01:00:22 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully started
Jan 1 01:00:23 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully started
Jan 1 01:00:23 netgearr7000 user.info : [process_monitor] : successfully started
Jan 1 01:00:23 netgearr7000 daemon.debug ntpclient[1570]: Connecting to ptbtime1.ptb.de [192.53.103.108] ...
Nov 18 13:29:40 netgearr7000 daemon.info ntpclient[1570]: Time set from ptbtime1.ptb.de [192.53.103.108].
Nov 18 13:29:40 netgearr7000 daemon.info process_monitor[1569]: cyclic NTP Update success (servers ptbtime1.ptb.de)
Nov 18 13:29:40 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully stopped
Nov 18 13:29:40 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully started
Nov 18 13:29:40 netgearr7000 daemon.warn openvpn[1377]: WARNING: --ping should normally be used with --ping-restart or --ping-exit
Nov 18 13:29:40 netgearr7000 daemon.warn openvpn[1377]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: Re-using SSL/TLS context
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: Control Channel MTU parms [ L:1623 D:1210 EF:40 EB:0 ET:0 EL:3 ]
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: Data Channel MTU parms [ L:1623 D:1450 EF:123 EB:406 ET:0 EL:3 ]
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: crypto_adjust_frame_parameters: Adjusting frame parameters for crypto by 68 bytes
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: calc_options_string_link_mtu: link-mtu 1623 -> 1571
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: crypto_adjust_frame_parameters: Adjusting frame parameters for crypto by 68 bytes
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
System Log
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: 1 variation(s) on previous 3 message(s) suppressed by --mute
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: Local Options String (VER=V4): 'V4,dev-type tun,link-mtu 1571,tun-mtu 1500,proto TCPv4_CLIENT,cipher AES-256-CBC,auth SHA256,keysize 256,key-method 2,tls-client'
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu 1571,tun-mtu 1500,proto TCPv4_SERVER,cipher AES-256-CBC,auth SHA256,keysize 256,key-method 2,tls-server'
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP/UDP: Preserving recently used remote address: [AF_INET]84.17.49.46:443
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: Socket Buffers: R=[131072->131072] S=[131072->131072]
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: Attempting to establish TCP connection with [AF_INET]84.17.49.46:443 [nonblock]
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP connection established with [AF_INET]84.17.49.46:443
Nov 18 13:29:40 netgearr7000 daemon.warn openvpn[1377]: --mtu-disc is not supported on this OS
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT link local: (not bound)
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT link remote: [AF_INET]84.17.49.46:443
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [14] to [AF_INET]84.17.49.46:443: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 [ ] pid=0 DATA len=0
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT READ [26] from [AF_INET]84.17.49.46:443: P_CONTROL_HARD_RESET_SERVER_V2 kid=0 [ 0 ] pid=0 DATA len=0
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TLS: Initial packet from [AF_INET]84.17.49.46:443, sid=0ec9efc3 b9dbdfa9
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [22] to [AF_INET]84.17.49.46:443: P_ACK_V1 kid=0 [ 0 ]
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [291] to [AF_INET]84.17.49.46:443: P_CONTROL_V1 kid=0 [ ] pid=1 DATA len=277
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT READ [1196] from [AF_INET]84.17.49.46:443: P_CONTROL_V1 kid=0 [ 1 ] pid=1 DATA len=1170
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: 6 variation(s) on previous 3 message(s) suppressed by --mute
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: VERIFY OK: depth=1, C=RO, L=Bucharest, O=CyberGhost S.A., CN=CyberGhost Root CA, emailAddress=info@cyberghost.ro
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: VERIFY KU OK
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: Validating certificate extended key usage
Nov 18 13:29:40 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: 3 variation(s) on previous 3 message(s) suppressed by --mute
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [1196] to [AF_INET]84.17.49.46:443: P_CONTROL_V1 kid=0 [ 4 ] pid=2 DATA len=1170
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [1184] to [AF_INET]84.17.49.46:443: P_CONTROL_V1 kid=0 [ ] pid=3 DATA len=1170
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [1184] to [AF_INET]84.17.49.46:443: P_CONTROL_V1 kid=0 [ ] pid=4 DATA len=1170
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
Nov 18 13:29:41 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully stopped
Nov 18 13:29:41 netgearr7000 user.info root: WireGuard number of non failed tunnels in fail set: 0
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: 6 variation(s) on previous 3 message(s) suppressed by --mute
Nov 18 13:29:41 netgearr7000 daemon.warn openvpn[1377]: WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1571', remote='link-mtu 1551'
Nov 18 13:29:41 netgearr7000 daemon.warn openvpn[1377]: WARNING: 'auth' is used inconsistently, local='auth SHA256', remote='auth [null-digest]'
Nov 18 13:29:41 netgearr7000 daemon.warn openvpn[1377]: WARNING: 'keysize' is used inconsistently, local='keysize 256', remote='keysize 128'
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [22] to [AF_INET]84.17.49.46:443: P_ACK_V1 kid=0 [ 5 ]
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [22] to [AF_INET]84.17.49.46:443: P_ACK_V1 kid=0 [ 6 ]
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, peer certificate: 4096 bit RSA, signature: RSA-SHA256
Nov 18 13:29:41 netgearr7000 daemon.notice openvpn[1377]: [frankfurt-rack410.nodes.gen4.ninja] Peer Connection Initiated with [AF_INET]84.17.49.46:443
Nov 18 13:29:41 netgearr7000 user.info : [vpn modules] : vpn modules successfully unloaded
Nov 18 13:29:41 netgearr7000 user.info : [vpn modules] : nf_conntrack_proto_gre successfully loaded
Nov 18 13:29:41 netgearr7000 user.info : [vpn modules] : nf_nat_proto_gre successfully loaded
Nov 18 13:29:41 netgearr7000 user.info : [vpn modules] : nf_conntrack_pptp successfully loaded
Nov 18 13:29:41 netgearr7000 user.info : [vpn modules] : nf_nat_pptp successfully loaded
Nov 18 13:29:42 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully started
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: SENT CONTROL [frankfurt-rack410.nodes.gen4.ninja]: 'PUSH_REQUEST' (status=1)
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [49] to [AF_INET]84.17.49.46:443: P_CONTROL_V1 kid=0 [ ] pid=6 DATA len=35
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT READ [22] from [AF_INET]84.17.49.46:443: P_ACK_V1 kid=0 [ 6 ]
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT READ [200] from [AF_INET]84.17.49.46:443: P_CONTROL_V1 kid=0 [ ] pid=7 DATA len=186
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,route-ipv6 2000::/3,dhcp-option DNS 10.0.0.243,route-gateway 10.15.5.1,topology subnet,ifconfig 10.15.5.18 255.255.255.0,peer-id 0'
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: OPTIONS IMPORT: --ifconfig/up options modified
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: OPTIONS IMPORT: route options modified
System Log
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: 4 variation(s) on previous 3 message(s) suppressed by --mute
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: Outgoing Data Channel: Cipher 'AES-256-CBC' initialized with 256 bit key
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: Outgoing Data Channel: Using 256 bit message hash 'SHA256' for HMAC authentication
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: Incoming Data Channel: Cipher 'AES-256-CBC' initialized with 256 bit key
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: 1 variation(s) on previous 3 message(s) suppressed by --mute
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: net_route_v4_best_gw query: dst 0.0.0.0
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 824 bytes
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: net_route_v4_best_gw result: via 10.0.1.1 dev vlan2
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: GDG6: remote_host_ipv6=n/a
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: net_route_v6_best_gw query: dst ::
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 68 bytes
Nov 18 13:29:42 netgearr7000 daemon.warn openvpn[1377]: sitnl_send: rtnl: generic error (-95): Not supported
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: TUN/TAP device tun1 opened
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: do_ifconfig, ipv4=1, ipv6=0
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: net_iface_mtu_set: mtu 1500 for tun1
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 36 bytes
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: net_iface_up: set tun1 up
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 36 bytes
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: net_addr_v4_add: 10.15.5.18/24 dev tun1
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 36 bytes
Nov 18 13:29:42 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [22] to [AF_INET]84.17.49.46:443: P_ACK_V1 kid=0 [ 7 ]
Nov 18 13:29:42 netgearr7000 user.info : [sfe] : shortcut forwarding engine successfully started
Nov 18 13:29:42 netgearr7000 daemon.debug process_monitor[1569]: Restarting cron (time sync change)
Nov 18 13:29:42 netgearr7000 user.info : [cron] : daemon successfully stopped
Nov 18 13:29:42 netgearr7000 cron.info cron[1939]: (CRON) STARTUP (fork ok)
Nov 18 13:29:42 netgearr7000 user.info : [cron] : daemon successfully started
Nov 18 13:29:42 netgearr7000 user.info : [process_monitor] : daemon successfully stopped
Nov 18 13:29:42 netgearr7000 daemon.info process_monitor[1569]: [process_monitor] : cleanup timers
Nov 18 13:29:42 netgearr7000 daemon.debug process_monitor[1944]: We need to re-update after 3600 seconds
Nov 18 13:29:42 netgearr7000 user.info : [process_monitor] : successfully started
Nov 18 13:29:42 netgearr7000 daemon.info process_monitor[1944]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
Nov 18 13:29:43 netgearr7000 user.info : [nas] : wait for network init
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: net_route_v4_add: 84.17.49.46/32 via 10.0.1.1 dev [NULL] table 0 metric -1
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 36 bytes
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: net_route_v4_add: 0.0.0.0/1 via 10.15.5.1 dev [NULL] table 0 metric -1
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 36 bytes
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: net_route_v4_add: 128.0.0.0/1 via 10.15.5.1 dev [NULL] table 0 metric -1
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 36 bytes
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: WARNING: OpenVPN was configured to add an IPv6 route. However, no IPv6 has been configured for tun1, therefore the route installation may fail or may not work as expected.
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: add_route_ipv6(2000::/3 -> :: metric -1) dev tun1
System Log
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: net_route_v6_add: 2000::/3 via :: dev tun1 table 0 metric -1
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: checking for received messages
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: sitnl_send: rtnl: received 76 bytes
Nov 18 13:29:47 netgearr7000 daemon.warn openvpn[1377]: sitnl_send: rtnl: generic error (-95): Not supported
Nov 18 13:29:47 netgearr7000 daemon.warn openvpn[1377]: ERROR: Linux IPv6 route can't be added
Nov 18 13:29:47 netgearr7000 daemon.warn openvpn[1377]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: Initialization Sequence Completed
Nov 18 13:29:47 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [84] to [AF_INET]84.17.49.46:443: P_DATA_V2 kid=0 DATA len=83
Nov 18 13:29:51 netgearr7000 user.debug : ttraff: data collection started
Nov 18 13:29:52 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [84] to [AF_INET]84.17.49.46:443: P_DATA_V2 kid=0 DATA len=83
Nov 18 13:29:53 netgearr7000 user.info : [nas] : start nas lan
Nov 18 13:29:53 netgearr7000 user.info : [nas] : start nas for wl0
Nov 18 13:29:53 netgearr7000 user.info : [nas] : NAS lan (wl0 interface) successfully started
Nov 18 13:29:53 netgearr7000 user.info : [nas] : start nas lan
Nov 18 13:29:53 netgearr7000 user.info : [nas] : start nas for wl1
Nov 18 13:29:53 netgearr7000 user.info : [nas] : NAS lan (wl1 interface) successfully started
Nov 18 13:29:54 netgearr7000 user.info : [nas] : daemon successfully stopped
Nov 18 13:29:56 netgearr7000 user.info : [nas] : daemon hanging, send SIGKILL
Nov 18 13:29:56 netgearr7000 user.info : [nas] : start nas lan
Nov 18 13:29:56 netgearr7000 user.info : [nas] : start nas for wl0
Nov 18 13:29:56 netgearr7000 user.info : [nas] : NAS lan (wl0 interface) successfully started
Nov 18 13:29:56 netgearr7000 user.info : [nas] : start nas lan
Nov 18 13:29:56 netgearr7000 user.info : [nas] : start nas for wl1
Nov 18 13:29:56 netgearr7000 user.info : [nas] : NAS lan (wl1 interface) successfully started
Nov 18 13:29:56 netgearr7000 user.info : [httpd] : daemon successfully stopped
Nov 18 13:29:56 netgearr7000 daemon.info httpd[1156]: [httpd] : httpd server shutdown
Nov 18 13:29:56 netgearr7000 daemon.info httpd[1983]: [httpd] : httpd server started at port 80
Nov 18 13:29:56 netgearr7000 user.info : [httpd] : http daemon successfully started
Nov 18 13:29:56 netgearr7000 user.info : [resetbutton] : daemon successfully stopped
Nov 18 13:29:56 netgearr7000 user.info : [resetbutton] : resetbutton daemon successfully started
Nov 18 13:29:57 netgearr7000 daemon.notice openvpn[1377]: TCP_CLIENT WRITE [84] to [AF_INET]84.17.49.46:443: P_DATA_V2 kid=0 DATA len=83
Nov 18 13:30:02 netgearr7000 daemon.notice openvpn[1377]: NOTE: --mute triggered...

Konfiguration:



Zwischenablage01.jpg
 Description:
Konfiguration
 Filesize:  50.05 KB
 Viewed:  1046 Time(s)

Zwischenablage01.jpg




Last edited by Thorsten77099 on Fri Nov 19, 2021 10:35; edited 1 time in total
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 11331
Location: Texas, USA

PostPosted: Thu Nov 18, 2021 18:25    Post subject: Reply with quote
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398

Durchsuchen Sie auch das Forum unter Forum: "Advanced Networking" und "DD-WRT (English)" nach "cyberghost" mit "search for all terms".

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware‽
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is‽
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
Thorsten77099
DD-WRT Novice


Joined: 18 Nov 2021
Posts: 4

PostPosted: Fri Nov 19, 2021 8:14    Post subject: Reply with quote
Hallo kernel-panic69,

danke für deinen Hinweis, der sicherlich gut gemeint ist, der mir aber leider nicht hilft.
Ich habe vorher schon im Board gesucht und auch ausserhalb.
Habe jetzt auch noch einmal die Anleitung unter deinem Link gelesen und komme trotzdem nicht weiter. Es scheint kein cyberghost spezifisches Problem zu sein, da der OpnenVPN Client nach meienr Meinung zu früh startet.
Der Hinweise unter "Advanced Network" zu suchen hat zwar viele Treffer gebracht aber ich konnte den Subjects auch nicht entnehmen das es mit meinem Problem zusammenhängt.
Da es ein solch offensichliches Problem ist, habe ich auf einen genaueren Hinweis gehofft.
Vielleicht kannst du mir ja noch weiterhelfen.
Danke
Gruß
Thorsten
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1665
Location: WCentral Indiana USA

PostPosted: Fri Nov 19, 2021 14:24    Post subject: Reply with quote
Versuchen Sie dies in der Befehlsbox. Als Start speichern:
Code:
Schlaf 20
restart_f openvpn


Try this in command box. Save as startup.
Sleep 20
restart_f openvpn
Thorsten77099
DD-WRT Novice


Joined: 18 Nov 2021
Posts: 4

PostPosted: Fri Nov 19, 2021 14:59    Post subject: Reply with quote
Hi bushant,
thx for helping.
If I do so, the service starts and the openVPN is ok.

But why I need it to do???

In a normal linux enviroment I would change the sort of starting the services.
Why only I have the problem and not everybody?

Regards
Thorsten
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1665
Location: WCentral Indiana USA

PostPosted: Fri Nov 19, 2021 15:32    Post subject: Reply with quote
Gute Frage. Ntp-Probleme?
Ist der Servername in den Zeiteinstellungen angegeben?

Wenn ja, lassen Sie dieses Feld leer oder verwenden Sie die Server-IP.

_________________
STUBBY DoT install guide----Forum Guide Lines (Please read!) --- How to get help the right way----Before asking for help - Read the forum guidelines AND upgrade DD-WRT!
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 8679
Location: Netherlands

PostPosted: Fri Nov 19, 2021 17:28    Post subject: Reply with quote
Although I can read German pretty well, I hope you do not mind me replying in English

There are specific Cyberghost instructions in the Client setup guide:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1234376#1234376

The client will keep trying and will kick in eventually but it can take some time if not configured properly.
So patience is your friend.

NTP certainly can be part of the problem as @bushant already said.

Cyberghost specific problems are that it tries to use Ipv6, the Cyberghost specific instructions should deal with that.

I hope that this helps

Edit: like @Bushant said leaving the NTP Time Server IP/Name field empty works best (for the latest build I have updated the help text)

Edit 2: are the busybox/shell commands really translated in the German version sleep = schlaf ??

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Thorsten77099
DD-WRT Novice


Joined: 18 Nov 2021
Posts: 4

PostPosted: Mon Nov 22, 2021 17:47    Post subject: Reply with quote
Hi, Thanks for the tips.
Ich werde es gleich morgen ausprobieren.
Ein Problem mit dem Zeitserver habe ich aber nicht. Es wird definitiv die Zeit via NTP abgefragt und ich sehe das im LOG. Nur dauert es hat ca. 23Sekunden bis das WAN Device UP ist und bis dann die Zeit eingestellt wird. OpenVPN versucht noch vor dem WAN UP zu starten.
Deswegen bin ich ja der MEinung hier stimmt was nicht mit der Bootreihenfolge der Dienste nicht.

Nach dem Reset mit Uhrzeit 01:00:00
geht es los nach 18 Sekunden los mit OpenVPN

Jan 1 01:00:18 netgearr7000 daemon.warn openvpn[1007]: DEPRECATED OPTION: ncp-disable. Disabling cipher negotiation is a deprecated debug feature that will be removed in OpenVPN 2.6

... bla bla

...
dann
Jan 1 01:00:20 netgearr7000 user.info : [wan] : WAN is up. IP: 10.0.1.160
...
...
.. bla bla
...
.. openVPN die Zweite ...
Jan 1 01:00:22 netgearr7000 daemon.err openvpn[1402]: Fatal TLS error (check_tls_errors_co), restarting
Jan 1 01:00:22 netgearr7000 daemon.notice openvpn[1402]: TCP/UDP: Closing socket
Jan 1 01:00:22 netgearr7000 daemon.notice openvpn[1402]: SIGUSR1[soft,tls-error] received, process restarting
Jan 1 01:00:22 netgearr7000 daemon.notice openvpn[1402]: Restart pause, 5 second(s)
...
...
... jetzt der Zeitserver
Jan 1 01:00:23 netgearr7000 daemon.debug ntpclient[1594]: Connecting to ptbtime1.ptb.de [192.53.103.108] ...
Nov 22 17:00:37 netgearr7000 daemon.info ntpclient[1594]: Time set from ptbtime1.ptb.de [192.53.103.108].
Nov 22 17:00:37 netgearr7000 daemon.info process_monitor[1593]: cyclic NTP Update success (servers ptbtime1.ptb.de)




Melde mich wieder
Gruß
Thorsten
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum