blkt DD-WRT Guru
Joined: 20 Jan 2019 Posts: 5660
|
Posted: Mon Nov 15, 2021 9:33 Post subject: New Build - 11/15/2021 - r47644 |
|
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)
CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (https, http or ftp). 'write {file} linux' then 'reboot'.
Repository: Trac SVN changelog since last build r47618 (GitHub mirror)
Notes:
• OpenVPN 2.5.4: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
• WireGuard 1.0.20210606/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• MiniDLNA • CoovaChilli • Privoxy • iperf3 • cake • FreeRADIUS • OpenSSL • dnsmasq • Unbound • Tor • Squid • SmartDNS • Asterisk • BusyBox
• In-kernel Samba ksmbd 3.4.2+: default min/max versions changed. • WSD update • ANTFS/NTFS3 kernel mode driver+++
• CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed; likely no longer required. • MAC Filtering within WebUI fixed (47184-47205).
• Sputnik Agent removed. • "Ignore WAN DNS" also ignores WAN domain. • Milkfish removed. ◦
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro devices excluded.
Issues:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search Trac tickets & discuss in forum before opening. Before reporting reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Example Template: Code: | [b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b] |
|
|
Argenis DD-WRT User
Joined: 18 Feb 2019 Posts: 159
|
Posted: Wed Nov 17, 2021 10:29 Post subject: |
|
Router/Version: WRT3200ACM V1
File/Kernel: ddwrt-linksys-wrt3200acm-webflash.bin
Previous/Reset: DD-WRT v3.0-r47618 std (11/05/21) No Reset
Mode/Status: Router/AP
Issues/Errors: None so far, syslog and klog look good, will update if there's any issues. _________________ Router: Linksys WRT3200ACM WLAN0 and 1 have same SSID
88W8964 802.11ac WLAN0 Mode AP VHT80 80MHz Mixed Mode Channel and Extension Channel Auto Extension LL-6
88W8964 802.11ac WLAN1 Mode AP 20 MHz Mixed Mode Channel Auto
SD8887 802.11ac disabled but visible on GUI and CLI
TX Power 18 dBm
Antenna Gain 0 dBi
U-APSD (Automatic Power Save)Enabled
Protection Mode None
RTS Threshold Disabled
Short Preamble Disabled
Short GI Enabled
Single User Beamforming Enabled
Multi User Beamforming Enabled
AP Isolation Disabled
Beacon Interval 100
DTIM Interval 2
WMM Support Enabled
Radar Detection Disabled
ScanList default
Sensitivity Range (ACK Timing) 500 (Default: 500 meters)
Max Associated Clients 256 (Default: 256 Clients)
Minimum Signal for authenticate -128
Minimum Signal for connection -128
Poll Time for signal lookup 10
Amount of allowed low signals 3
Wireless security is WPA2 Personal CCMP-128 only
QAM256 is on |
|