Posted: Thu Oct 28, 2021 14:52 Post subject: New Build - 10/28/2021 - r47608
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: WRT1900ACSv1 / DD-WRT v3.0-r47608 std (10/28/21)
File/Kernel: CLI webflash / Linux 4.9.287 #2915 SMP Thu Oct 28 12:09:45 +07 2021 armv7l
Previous/Reset: r47596 / No
Mode/Status: Gateway, OpenVPN Client, FreeRADIUS Server, VLANs, VAPs, WPA3 / Uptime 9:21 hours
Issues/Errors: Faster to get NTP, but intermittent Internet connectivity issues (possibly due to VPN). I don't see anything pertinent in the logs yet, but attaching just in case. I'll continue trouble-shooting OpenVPN and if still no joy, might try flashing back to an older build that had worked for me.
EDIT: My issue was related to OpenVPN. While leaving the ACSv1 alone, I rolled my spare ACSv2 all the way back to r47256 and that was having the same type of issues ("connected" to VPN server but Internet mostly unresponsive). Disabling OpenVPN on that allowed everything else to work fine.
EDIT #2: OpenVPN problem solved. Until today, I'd been using an alternate config remote-random list of alternate VPN servers each with its own port number, and this used to work just fine. For whatever reason (maybe an OpenVPN parameter got more strict and/or maybe my VPN provider made a change), this stopped working today (e.g., 50% or less ping response). On a hunch, I culled the VPN server list to include only servers with the same exact port number as the one entered in the dd-wrt OpenVPN Client setup, line 4. So now all's well. _________________ My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
Router/Version: Linksys WRT32X
File/Kernel: DD-WRT v3.0-r47608 std (10/28/21),Linux 4.9.287 #2915 SMP Thu Oct 28 12:09:45 +07 2021 armv7l
Previous/Reset: 10-20-2021-r47581
Mode/Status: AP only
Issues/Errors: update without reset, uptime over 1 day without any error
In the cpu features, it appears more cpu feature than previous update r47581.It feels like faster when changing route setting. Any one feels faster when login into the router?
I've seen several other references to the Samba issue. Copying files, Creating Files, and Creating Folders. I ran several tests on r47608 and r47528. --- r47608 is exhibiting errors so I captured a few using this version and a simple process of creating folders and files, and capturing the immediate output from the log. My first test was on a factory default version, with only the bare minimum changes for testing Samba. USB Formats tested - EXT3, NTFS, FAT32, EXFAT
See attached file "smb.conf.txt"
**************************
From Microsoft Windows [Version 10.0.19042.1288] - Create Folder and Create File on USB Drive
Two folders and files were created with only one attempt at each (file, folder creation)
Error Pop-up images: - Same error for both folder and file
*************
File Too Large
The file '<%1 NULL:NameDest>' is too large for the destination file system.
*************
Router Log:
[61220.768873] ksmbd: cannot get linux path (/mnt/sda2/New folder), err = -22
[61220.794939] ksmbd: cannot get linux path (/mnt/sda2/New folder (2)), err = -22
[61339.052556] ksmbd: cannot get linux path (/mnt/sda2/New Text Document.txt), err = -22
[61339.078513] ksmbd: cannot get linux path (/mnt/sda2/New Text Document (2).txt), err = -22
-After Refresh W10 screen, these files and folders appeared
*************
New folder
New folder (2)
New Text Document.txt
New Text Document (2).txt
*************
Successfully deleted the folders, but could not delete the files from Windows 10
**************************
**************************
From Android Phone SM-N960U – Android 10 (API 29) - Create Folder and Create File on USB Drive
A folder and file was created with only one attempt at each (file, folder creation)
Error pop-up images:
*************
“Failure”
“Failed to create a folder”
*************
“Failure”
“Failed to create a file”
*************
Router Log:
[62286.771519] ksmbd: cannot get linux path (/mnt/sda2/Newfolderfromandroid), err = -22
[62515.069973] ksmbd: cannot get linux path (/mnt/sda2/Newfilefromandroid.txt), err = -22
-After Refresh Android screen, this file and folder appeared
*************
Newfolderfromandroid
Newfilefromandroid.txt
*************
Successfully deleted both “folder and file” from android
**************************
I did see some inconsistencies while testing, W10 File Explorer, Android CX File Explorer, and default Android file manager, although all errors in the log were generally the same.
"cannot get linux path (/mnt/sdaX/XXXXXXXXXXX), err = -22"
@Blkt --> Reference previous post --- Should I have posted this under another Topic, or the Bugtracker, or has it already been reviewed based on other relevant posts under Broadcom/Atheros? Thanks!
@papagdog Posting here is correct and already referenced 7486, Atheros, Broadcom, so only a matter of time.
@Blkt & @kernel-panic69 --- Thanks, just wanted to validate if the testing information I provided under this Topic was relevant, over-simplified, or too vague. Recently retired Sr Systems Analyst, so I have time to play and hopefully provide useful information for this forum. Recently purchased an additional router, Asus RT-AC68U, but do not have it set up yet. I do understand very well how you are totally overwhelmed by reading many of the conversations in this forum. Best of luck to the both of you!
Until today, I'd been using an alternate config remote-random list of alternate VPN servers each with its own port number, and this used to work just fine. For whatever reason (maybe an OpenVPN parameter got more strict and/or maybe my VPN provider made a change), this stopped working today (e.g., 50% or less ping response). On a hunch, I culled the VPN server list to include only servers with the same exact port number as the one entered in the dd-wrt OpenVPN Client setup, line 4. So now all's well.
