Posted: Mon Oct 25, 2021 9:37 Post subject: New Build - 10/25/2021 - r47596
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47596 std (10/25/21)
Kernel: Linux 4.4.289 #4369 SMP Mon Oct 25 03:56:19 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound, CTF & FA Enabled. NAT/QoS Off
Reset: No
Previous : r47581
Upgrade: Web
Temperatures CPU 80.8 °C / WL0 manuel turn off /WL1 57.1 °C
Load: 0.02, 0.06, 0.01
Uptime 7 hours.
Thank BS.
[Moderator-MSOEngineer removed the un-necessary code since you created a new topic in the right spot. Please keep build posts for reporting issues and errors and not random stuff that's off-topic- even if useful]
Firmware: v3.0-r47596 std (10/25/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.289 #4369 SMP Mon Oct 25 03:56:19 +07 2021 armv7l
Previous: v3.0-r47581 std (10/20/21)
Mode/Status: AP wired and wireless / Up and running for 1.5 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 59.7 °C / WL0 46.0 °C / WL1 51.1 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps). Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r47596 mini (10/25/21)
Kernel: Linux 4.4.289 #4372 Mon Oct 25 04:19:04 +07 2021 armv7l
Mode: Client, AP
Reset: Nope.
Previous: DD-WRT v3.0-r47581 mini
Status: Up 12hrs 32 mins, booted clean, temps significantly lower (could be cold spell-related)
Temperatures: CPU 77.5 °C / WL0 53.0 °C / WL1 56.6 °C
Router: Asus RT-AC66U Mode: AP
File: DD-WRT v3.0-r47596 giga (10/25/21)
Kernel: Well, the one included in the build - which is to say, in this case: Linux 4.4.289 #12418 Mon Oct 25 04:40:19 +07 2021 mips
Reset: no
Status: working, except that, post-flash I had to powercycle the router before I could log into the router (log in either via browser or ssh).
Previous build: 44863.
Uptime: Thirty minutes
Flashed via: GUI. _________________ My router: Asus RT-AC66U
Operating systems on devices that I use with that router: GNU-Linux; Windows 10; Android 13
VAP on wl0.1 working fine, VAP on wl1.1 still does not work as on previous versions.
Did you note the discussion thread in the first post:
• VAPs not working at boot fixed for unbridged VAPs in 40562 - 40566. Effective startup commands discussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
when you found the commands that will work for your machine goto administration tab -> command tab, enter them and save as firewall NOT startup.
If you save commands as startup you will notice when you click APPLY the BUG will reappear.
This is because, when you click APPLY all required services are restarted, and the commands being saved as firewall will run both on startup and when you click APPLY.