Posted: Tue Oct 19, 2021 11:14 Post subject: free ram with a tip
i update for 27506 to 28493 and it free ram like r27506 are 14m.so why?.if i reset default it have only 12m.who can explain for me.i see free ram still 14m.can something which like deamon was stopped when it havent in 27506
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Tue Oct 19, 2021 17:51 Post subject:
Those old builds you are running are very old and obsolete, nobody can tell you anything...about those..
Also the router you probably have, has very low memory, and those builds also may have mem-leak and have tons of security issues..not very good idea to put on any router...if you need a build for client mode or just a switch/wap mode, much better to use newer builds...
In fact on those kind of devices DDWRT uses almost all the memory...and those routers are for very basic needs and slow connections...builds are stripped off to make the router work on bare minimum and lot of futures are missing... i do have an old 740v1 running a build from my signature and works ok, but out of 32MB ram has 8-9 MB ram left while fully operational.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
For the opposite side of the RAM discussion, my R9000 has a ton of unused memory, around 800MB. Is there something I can use that memory for that would improve performance? I have the DNSMasq entries set to 20000, but I don't see any place where I can allow more memory to be used for caches, buffers or other static structures. Any thoughts? _________________ Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
For the opposite side of the RAM discussion, my R9000 has a ton of unused memory, around 800MB. Is there something I can use that memory for that would improve performance? I have the DNSMasq entries set to 20000, but I don't see any place where I can allow more memory to be used for caches, buffers or other static structures. Any thoughts?
Those old builds you are running are very old and obsolete, nobody can tell you anything...about those..
Also the router you probably have, has very low memory, and those builds also may have mem-leak and have tons of security issues..not very good idea to put on any router...if you need a build for client mode or just a switch/wap mode, much better to use newer builds...
In fact on those kind of devices DDWRT uses almost all the memory...and those routers are for very basic needs and slow connections...builds are stripped off to make the router work on bare minimum and lot of futures are missing... i do have an old 740v1 running a build from my signature and works ok, but out of 32MB ram has 8-9 MB ram left while fully operational..
i want a other custom ddwrt.where do i can find.i known kong
Joined: 08 May 2018 Posts: 14217 Location: Texas, USA
Posted: Wed Oct 20, 2021 0:22 Post subject:
There are no other "custom" DD-WRT versions available to the public. After <Kong> left, that was it. Perhaps you need to focus on how to configure Official builds first. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
There are no other "custom" DD-WRT versions available to the public. After <Kong> left, that was it. Perhaps you need to focus on how to configure Official builds first.
i can find a version for the private in reddit or ....
There are no other "custom" DD-WRT versions available to the public. After <Kong> left, that was it. Perhaps you need to focus on how to configure Official builds first.
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Wed Oct 20, 2021 8:01 Post subject:
nanvanu1 there are no custom builds for your router...and did you state what is your router model ?
So we are guessing only...TP link 740xx, Kong builds are only for large size flash ram and memory routers...
Bear in mind even OpenWRT abandoned those routers...like yours TP link 740xx, there are no new builds for those...only the old can be run and there you can do a customization, but i doubt you are capable of doing that..... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
nanvanu1 there are no custom builds for your router...and did you state what is your router model ?
So we are guessing only...TP link 740xx, Kong builds are only for large size flash ram and memory routers...
Bear in mind even OpenWRT abandoned those routers...like yours TP link 740xx, there are no new builds for those...only the old can be run and there you can do a customization, but i doubt you are capable of doing that.....
do you can help me custom a version.i havent linux.i use tplink 740n v4 and r 28483
nanvanu1 there are no custom builds for your router...and did you state what is your router model ?
So we are guessing only...TP link 740xx, Kong builds are only for large size flash ram and memory routers...
Bear in mind even OpenWRT abandoned those routers...like yours TP link 740xx, there are no new builds for those...only the old can be run and there you can do a customization, but i doubt you are capable of doing that.....
nanvanu1 there are no custom builds for your router...and did you state what is your router model ?
So we are guessing only...TP link 740xx, Kong builds are only for large size flash ram and memory routers...
Bear in mind even OpenWRT abandoned those routers...like yours TP link 740xx, there are no new builds for those...only the old can be run and there you can do a customization, but i doubt you are capable of doing that.....
i wont use openwrt because it is too complicated
Dude dont spend your time with this piece of archeology, use the factory firmware, none will spend time for this machine, especially now that the code has become heavy even for routers 3 times stronger than yours, buy a new one or use the factory firmware