agregate 2 router outputs port into one output at 2,5 g

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods
Author Message
jcdole
DD-WRT Novice


Joined: 13 Jun 2015
Posts: 41
Location: South-West France

PostPosted: Thu Oct 07, 2021 21:24    Post subject: agregate 2 router outputs port into one output at 2,5 g Reply with quote
ISP MODEM ROUTER
One 2 GBE fiber wan input port
4 x 1 GBE ethernet output port (Throughput is shared on the 4 ports but only one port is in used)

Only one output is used and is connected to an R6300V2 router.
The distance between the ISP modem and the R6300V2 router is 10 m and no other wires can be added.

My idea is to connect 2 ports ( 1 GBE ) from ISP Modem-router to some hardware and then connect using the cat+6 existant cable to a new router 2.5 or 5 GBE wan input.

Is it possible ? if yes what kind of hardaware to use for the two new devices ?

_________________
Netgear R6300v2 DD-WRT v3.0-r47495 std (09/28/21) - Linux Opensuse Leap 15.2 - Win 10
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum