New Build - 09/24/2021 - r47481

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3
Author Message
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6407
Location: UK, London, just across the river..

PostPosted: Sun Sep 26, 2021 12:38    Post subject: Reply with quote
kernel-panic69 wrote:
Explain the collision and hiccups, then Rolling Eyes All I did was mention that those were updated, not that they were the fault here...


i do not collide, i share my finding too...share is care...we say in UK...

at the end of the day nxdoman could be very likely to an DNS servers outrage fun stuff Laughing Laughing not related to DDWRT at all......

So, if the bloke has an issues with SmartDNS and I did have some issues since the last few updates...He has to monitor those, as im not using SmartDNS...any more...no hiccups with Stubby so far..

Either custard (TV in cockney) is broken or the broadcast company has an issues...Rolling Eyes

As far as, layer 7 and layer 3 DNS..im sure about it and it makes a sense...too... they both can co-exist and do not interfere...
I used/use various models to compare...DNScrypt, Stubby, SmartDNS...just haven't seen browser with DoT...as most of those use DoH...

no hard feelings, no offence at all...remember, 'sharing is caring' Wink

itwontbewe wrote:
Do you have Ignore WAN DNS Enabled ?

If so do you have a nameserver in /tmp/resolv.conf


if you see his config he is using
no-resolv
server=127.0.0.1#6053

so, ignore WAN DNS is done on DNSmasq level

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Sponsor
dwardo
DD-WRT User


Joined: 07 Feb 2013
Posts: 126
Location: France

PostPosted: Sun Sep 26, 2021 13:35    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: archer-c9v1-webflash.bin/Linux 4.4.283 #4114 SMP Fri Sep 24 04:08:16 +07 2021 armv7l
Previous/Reset: r47461/no
Mode/Status: Gateway/2.4GHz & 5GHz AP/Openvpn server/Wireguard server/DHCP server/DNS Server/Port forwarding/ipv4 & ipv6/CTF+FA
Issues/Errors: None detected yet
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 260
Location: United States

PostPosted: Sun Sep 26, 2021 16:29    Post subject: Reply with quote
are you using smartdns by enabling in the gui or cli?

i tested an earlier version of smartdns when i enabled via gui it would create a persistent cache file. when i started via script it didn't create it.
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Sun Sep 26, 2021 19:44    Post subject: Reply with quote
Alozaros wrote:
Either custard (TV in cockney) is broken or the broadcast company has an issues


This is an international forum, if from your lion's lair you try to provide some lump of ice you'll find most others are just scotch mist at you... So get your head out of your bottle and glass. right?

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6407
Location: UK, London, just across the river..

PostPosted: Sun Sep 26, 2021 20:09    Post subject: Reply with quote
the-joker wrote:
Either custard (TV in cockney) is broken or the broadcast company has an issues

This is an international forum, if from your lion's lair you try to provide some lump of ice you'll find most others are just scotch mist at you... So get your head out of your bottle and glass. right?


I wouldn't tell that to anyone, nor ill comment it... as it's well below my class...and its not nice...

itwontbewe wrote:
are you using smartdns by enabling in the gui or cli?

i tested an earlier version of smartdns when i enabled via gui it would create a persistent cache file. when i started via script it didn't create it.


if your question was addressed to me
Alozaros wrote:
i also have some NXdomains using stubby and SmartDNS via jffs config...to be precise


i used it via jffs (CLI) only, GUI must be turned off...never tried GUI option...and hmmm i haven't checked it...but as it's working, persistent cache must be at the jffs or tmp need to have a look...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
TCB13
DD-WRT User


Joined: 06 Jun 2010
Posts: 260
Location: Portugal

PostPosted: Sun Sep 26, 2021 20:51    Post subject: Reply with quote
@Alozaros thank you for the tips about blahdns. I picked it because it should be way more private than Quand9. I don't trust those guys very much.

Anyways, since you and @kernel-panic69 seem to be running SmartDNS via CLI, are you experiencing any crashes?

Sometimes (maybe once a day) my SmartDNS crashes and I've to SSH into the router and start it again. I still don't have any logs on this.

_________________
1x Netgear R7800 (latest); 3x Netgear R7000 (latest); 2x Asus RT-N16 (v3.0-r47656); 2x Fonera 2100 (v3.0-r45454).
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Mon Sep 27, 2021 6:51    Post subject: Reply with quote
Linksys E2500
DD-WRT v3.0-r47481 mega (09/24/21)
Linux 4.4.283 #12014 Fri Sep 24 05:08:40 +07 2021 mips
"dd-wrt.v24-47481_NEWD-2_K3.x_mega.bin'
GUI install over r47479
simple WAP
all good
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Mon Oct 04, 2021 18:28    Post subject: Reply with quote
Before I forget all this; last week, I updated these with the 47481 build:
-R6300v1 (mips: .bin)
-N66U 'K3X' ('big' on CFE 1.0.1.9) *2
-EA6900v1.1 *2 (CFE 1.2.0.1 mac+2/+4)
One EA6900 was on FreshTomato with CFE 1.2.0.1, and the other latest OEM. I then flashed the former to try CFE 1.3.0.7 (and use the 'new style' mac setup (+2/+4), but found it broke overclocking (been running at 1000,666 for years); verified by cpuinfo since dmesg doesn't report the CPU init. Then I rolled the OEM f/w back to 161129 and was able to flash directly to this build from the CFE miniweb server. I put 1.2.0.1 on it to verify/test OC, then rolled the other back to 1.2.0.1 too. Fwiw, 1.3.0.7 allows using XWRT's (via AsusWRT-Merlin) AI Mesh feature, along with fixing the GUI port numbering and case lights. I saw no difference in case lighting b/t the CFE versions.

Did the same cooling mods to the 'new' one too (got it several months ago for $5 at goodwill). Just replacing the cooling pad (with a really good one...also wet-sanded the heatsink a bit) dropped the open-air temp by 15C. Shocked Not much help though without adding some cooling holes onto the top.

Oh, I also tested the USB ports and they both work fine. Wink USB2 port loads ehci_hcd and USB3 loads xhci_hcd. Set up a share on USB3 and worked a-ok.
So @egc that answers the question in your install thread. Cool

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12834
Location: Netherlands

PostPosted: Mon Oct 04, 2021 20:04    Post subject: Reply with quote
Thanks Jeremy, I will update the guide Smile

I actually have my EA6900 here at hand at the moment (I am in my holiday home) and totally forgot about the USB ports Smile

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Mon Oct 04, 2021 21:00    Post subject: Reply with quote
Upcoming in-depth write-up for Northstar Netgear R-series and Linksys EA-series using 1.3.0.7 CFE. Whether or not it gets shared on here, no idea. Too many ingrates. But at least the donations bin got full quick for this project.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Goto page Previous  1, 2, 3 Display posts from previous:    Page 3 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum