New Build - 09/20/2021 - r47474

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Mon Sep 20, 2021 12:20    Post subject: New Build - 09/20/2021 - r47474 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -O {file URL}') with http (not https) or ftp. 'write {file} linux' then 'reboot'.

Repository: Trac SVN changelog since last build r47461 (GitHub mirror)

Notes:
OpenVPN 2.5.3: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210606/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4. • Support added for TP-Link Archer C8 v2 and v3.
MiniDLNACoovaChilliPrivoxyiperf3cakeFreeRADIUS OpenSSL BusyBox dnsmasq Unbound Tor Squid SmartDNS Asterisk
In-kernel Samba (ksmbd 3.4.2): default min/max versions changed. • WSD update ANTFS/NTFS3 kernel mode driver+++
• Added swconfig support for Broadcom devices.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed; likely no longer required. • MAC Filtering fixed in WebUI (see 47184-47205).
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro devices excluded. • Sputnik Agent is removed.

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs in 40562 - 40566. Effective startup commands discussion thread is here.
If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 301
Location: Maine, USA

PostPosted: Mon Sep 20, 2021 13:21    Post subject: Reply with quote
Router/Version: Linksys E3200
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega-e3200.bin
Firmware: DD-WRT v3.0-r47474 mega (09/20/21)
Kernel: Linux 4.4.283 #11958 Mon Sep 20 08:53:15 +07 2021 mips
Mode: Guest Gateway/QoS
Previous: r46239
Reset?: N
Status: Working
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 964
Location: WV, USA

PostPosted: Mon Sep 20, 2021 13:46    Post subject: Reply with quote
Router/Version: R6250
File/Kernel:
Previous/Reset: r47381/No
Mode/Status: Router/AP/VAP
Issues/Errors: None so far

_________________
Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate

Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r53562
Features in use: multiple VLANs over single trunk port

Linksys EA8500 WDS Station x2 - DD-WRT r53562

Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port.

OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

Forum member #248
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Mon Sep 20, 2021 14:07    Post subject: Reply with quote
Router Model: Linksys EA6900 (XVortex CFE)

Firmware Version: DD-WRT v3.0-r47474 std (09/20/21)
Kernel Version: Linux 4.4.283 #4096 SMP Mon Sep 20 05:45:13 +07 2021 armv7l

Upgraded: from DD-WRT v3.0-r47033 std (07/08/21)via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)

Reset: No not this time

Configuration: AP, DHCP server, 2,4GHz wireless running, 5GHz running, some static leases and some port range forwarding, NVRAM size just over 32K (NVRAM size should not be a problem with the Xvortex CFE)

Status: Up for 2 hours
Errors: none so far

Thanks BrainSlayer!!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Mon Sep 20, 2021 14:49    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.283 #4096 SMP Mon Sep 20 05:45:13 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r47461 std (09/17/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd (using Entware's php8) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Mon Sep 20, 2021 16:54    Post subject: Reply with quote
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47474 std (09/20/21)
Kernel: Linux 4.4.283 #4096 SMP Mon Sep 20 05:45:13 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound & CTF & FA Enabled. NAT/QoS Off
Reset: No, not this time
Previous : r47381
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 75.2 °C / WL0 shutdown /WL1 55.8 °C
Load: 0.18, 0.06, 0.01
Uptime 2h30m
Errors: No, not at this moment. Merci!
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Mon Sep 20, 2021 17:01    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r47474 std (09/20/21) (prev. DD-WRT v3.0-r47282 std (08/30/21))
Kernel: Linux 4.4.283 #4096 SMP Mon Sep 20 05:45:13 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, up 1:24h.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-47474_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r47474 big (09/20/21) (prev. DD-WRT v3.0-r47282 big (08/30/21))
Kernel: Linux 4.4.283 #11954 Mon Sep 20 08:48:36 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, up 1:24h.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Mon Sep 20, 2021 18:09    Post subject: Reply with quote
Linksys E2500
DD-WRT v3.0-r47474 mega (09/20/21)
Linux 4.4.283 #11958 Mon Sep 20 08:53:15 +07 2021 mips
GUI install over r47461
'dd-wrt.v24-47474_NEWD-2_K3.x_mega.bin'
used as a simple WAP
all very good -- uptime 14:27

###

The Asus RT-N12D1 did NOT fare so well Evil or Very Mad

In the wee hours last night using its webif I installed r47474 over working r47461 that hasn't been reset in long time
Could NOT reach it after that...ssh even said it was unreponsive. Could access devices behind it so ports were still alive.
Dad called before daylight saying internet was NOT working there. I went to see what all was broken and the RT-N12D1 was about as dead as it could get.
Only its switch ports were still alive.
Power cycle did NOTHING this time so I swapped it out with what was used for many years
Netgear WNR2000v3
DD-WRT v3.0-r43845 std (07/18/20)
Linux 3.10.108-d10 #52834 Sat Jul 18 05:21:53 +04 2020 mips
It already had the correct conf & its MAC/name is still in main router DCHP leases so all is good for them again

Had to recover the ASUS. Also it will soft brick if you do a reset with any either of the last two previous releases.
Doing recovery on the stupid thing a few times really is a PITA. Crying or Very sad

I don't think BS ever had this device and it has always shown as an Asus RT-N12B running DD-WRT Rolling Eyes
ASUS RTN12D1 stuff
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Mon Sep 20, 2021 19:09    Post subject: Reply with quote
mrjcd wrote:
The Asus RT-N12D1 did NOT fare so well Evil or Very Mad

In the wee hours last night using its webif I installed r47474 over working r47461 that hasn't been reset in long time
Could NOT reach it after that...ssh even said it was unresponsive. Could access devices behind it so ports were still alive.
I updated my old WRT54GL last night to 47474 nokaid (as a backup for my sis' house*) to see if the latest builds worked. Lost access after the flash, but after resetting (which seemed to be finicky too) I got into the GUI. However, after setting it up as a Client Bridge I lost GUI and telnet access; no ping either. The Switch Config page is all messed up; see pic. Reset and tried AP mode too; same thing.

I reset and reverted to 46640 (which actually came up as 46412, that was before the 46454 bcm swconfig changes) and was fine. And it's Switch Config page is normal.

*Good thing I didn't update my sis' WRT54 AP's over the weekend. My nephew had reset one and messed everything up. They have schitty slow DSL with no neighbors, so they don't need anything faster/newer.

I pinged Sebastian about it, but he's busy w/ other things atm to investigate. I'm in no hurry... at all. B-)



WRT54GL-47474-nokaid-swconfig mod.png
 Description:
Switch Config in 47474
 Filesize:  82.24 KB
 Viewed:  6420 Time(s)

WRT54GL-47474-nokaid-swconfig mod.png



_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2029

PostPosted: Mon Sep 20, 2021 21:23    Post subject: Reply with quote
R6200v2
DD-WRT v3.0-r47474 std (09/20/21)
Linux 4.4.283 #4096 SMP Mon Sep 20 05:45:13 +07 2021 armv7l

tftp R6250. chk over 47449
No reset

wl0 WLAN Repeater, wl1 AP, static leases,Access Restrictions, Connection Watchdog

All seems well.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Mon Sep 20, 2021 21:45    Post subject: Reply with quote
bushant wrote:
R6200v2
DD-WRT v3.0-r47474 std (09/20/21)
Linux 4.4.283 #4096 SMP Mon Sep 20 05:45:13 +07 2021 armv7l

tftp R6250. chk over 47449

I have been meaning to address this and get the proper information to BS so you don't have to muck with it like this. I thought perhaps the file could be hexedited, or that burnboardid could be done; but a proper port would be more beneficial. Both the v1 and v2 are still TBD because donated hardware was never sent.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Mon Sep 20, 2021 22:09    Post subject: Reply with quote
jwh7 wrote:
I pinged Sebastian about it, but he's busy w/ other things atm to investigate. I'm in no hurry... at all. B-)

Surprised you are still messing with the old things...
I still have three running within my net 24/7 but I quit any firmware stuff on them long while back & put old reliable FW that works for me.
WRT54Gv2 (r35531) WDS to WAP54Gv3 (r35531) wired to WRT54Gv8 (r33555) AP an ain't nobody hacked into it yet and iffin they did I would prolly know about fairly quick and just kill it. The WDS link is on ch 14 so ain't anybody here I know of can even see that. 'bout same as my many years old WDS link with the two E2100 between my place & the folks...E2100s WDS is on ch 13 way up in the air so it never interfers with the ch 14 between their house & shop down fairly low.
Thanks--glad you told BS... every lil bit helps iffin he get around to it. Razz
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Tue Sep 21, 2021 1:14    Post subject: Reply with quote
mrjcd wrote:
Surprised you are still messing with the old things...
Well, the last build on it was from Feb 2020. Wink Though my sis' WRT's have a 11/20 build...

So another weekend investigation was my parents' N66U AP (bcasting via ICS from their Win10 Verizon cellular USB internet) quit working. Resetting had no effect, and plugging in power immediately lit up 3 LED's that never flashed/changed... seemed like a goner. Note: this had a WAN and (1 or 2) LAN ports damaged by lightning years ago. So I had little hope for it.

This evening I took it apart to check for issues (and test the caps) and forgot it had a factory serial header (and labelled! crazy.), so figured I'd see what (if anything) it was doing. Lots of 'can't read nvram' sorta errors. Broke CFE, `nvram erase`, and boom! Back into AsusWRT-Merlin... which is long unsupported for the N66U so I put 47474-big on it. As usual for the past couple years, I had lots of trouble getting a web browser to talk to it after a reset (FF/Edge/IE/Netsurf/Epiphany) but finally got it set up as an AP and working. Yay me. \o/

Anyone still awake? Cool

Router/Version: Asus RT-N66U B1 (1.0.1.9 CFE)
File/Kernel: N66U big / Linux 4.4.283 #11954 Mon Sep 20 08:48:36 +07 2021 mips
Previous/Reset: AsusWRT-Merlin / oh ya, all kinds of resets
Mode/Status: AP
After I was done, swconfig shows VLAN 1: 0 1 2 3 4 8t
However, the Switch Config tab is still all crazy (see below). And before setting up as AP that page had all the checkboxes blank. I see BS made a SwCfg change for bcm today.



RT-N66U-47474-big-swconfig mod.png
 Description:
N66U GUI Switch Config
 Filesize:  61.08 KB
 Viewed:  6233 Time(s)

RT-N66U-47474-big-swconfig mod.png



_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
joaoptc
DD-WRT User


Joined: 28 Oct 2014
Posts: 57

PostPosted: Tue Sep 21, 2021 11:42    Post subject: Reply with quote
Router/Version: Linksys EA6900
File: linksys-ea6900-webflash.bin
Firmware: Firmware: DD-WRT v3.0-r47474 std (09/20/21)
Kernel: Linux 4.4.283 #4096 SMP Mon Sep 20 05:45:13 +07 2021 armv7l
Mode: Gateway, Wifi, WAN to DSL, Keep Alive reboot 2:00 Thu, Startup script -> WOL on demand
Reset: No
Status: The startup script dies. It runs for a few hours and dies. I ran it manually with nohup and the output is:
root@BatRouter:~# cat nohup.out
Killed
root@BatRouter:~#

Any ideas? This script always worked.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Tue Sep 21, 2021 11:57    Post subject: Reply with quote
What is syslog showing?

What is the nvram size (32K Bug?)

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Goto page 1, 2, 3, 4, 5  Next Display posts from previous:    Page 1 of 5
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum