Posted: Sat Sep 18, 2021 20:57 Post subject: New Build - 09/17/2021 - r47461
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Asus RT-N12B (RT-N12D1)
DD-WRT v3.0-r47461 mega (09/17/21)
Linux 4.4.283 #11912 Fri Sep 17 13:15:05 +07 2021 mips
yesterday GUI install over r47381
'dd-wrt.v24-47461_NEWD-2_K3.x_mega.bin'
WAP + isolated guest net.
rebooted itself after few hrs but works ok after it does that.
same as previous
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1245994#1245994
Early today I didn't change a thing ...only clicked its 'Apply Settings' in webif page .../index.asp
that caused to lose all http access No I didn't even try ssh I just went over there to find out it was working somewhat.
its main wifi net was NOT working or broadcasting at all but its guest net was working fine & switch ports were all good.
I powered it off & back on via its pwr button. It has all been working perfect since then.
current uptime 11:33
alright yea ---- it is prolly due a good reset & reconfig since its last was r43094
#
Linksys E2500
DD-WRT v3.0-r47461 mega (09/17/21)
Linux 4.4.283 #11912 Fri Sep 17 13:15:05 +07 2021 mips
GUI install over r47381
'dd-wrt.v24-47461_NEWD-2_K3.x_mega.bin'
just a simple WAP
all good
Uptime 1 day, 7:49
The RT-N12D1 has been very good -- uptime 1 day, 15 min
after I done mentioned in my previous post
Quote:
I didn't change a thing ...only clicked its 'Apply Settings' in webif page .../index.asp
that caused to lose all http access No I didn't even try ssh I just went over there to find out it was working somewhat.
its main wifi net was NOT working or broadcasting at all but its guest net was working fine & switch ports were all good.
I powered it off & back on via its pwr button. It has all been working perfect since then.
current uptime 11:33
I let ya know if it reboots itself anymore and if it does I'll swap it out and give the ol girl a good cleaning
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Mon Sep 20, 2021 6:40 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r47461M Community Build (09/17/21)
Kernel Version: Linux 4.4.283 #1 SMP Fri Sep 17 10:42:10 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r47381
Reset: No not this time
Status: Up and running for 8 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, 2.4 GHz and 5 GHz, OpenVPN client working, WireGuard client working.