|
Author |
Message |
MasterMech DD-WRT Novice
Joined: 16 Sep 2021 Posts: 3
|
Posted: Thu Sep 16, 2021 10:16 Post subject: Guest Network Setup |
|
I am currently trying to setup guest networks on my R7800 with v3.0-r34900M installed.
I have managed to get both guest networks working for both 2.4GHz & 5 GHz but I have not be able to follow the guide in this link to the letter:
https://wiki.dd-wrt.com/wiki/index.php/Guest_WiFi_+_abuse_control_for_beginners
If I do as the guide states & set the DHCP for the interfaces upon connecting to the guest network there is no internet access.
If I set the DHCP to bridge 1 & bridge 2 everything works great.
Is this an issue in terms of security or am I missing something hence why it is not working as per the guide?
I have attached some screen grabs of my current settings with everything working.
Many thanks
Last edited by MasterMech on Thu Sep 16, 2021 10:19; edited 1 time in total |
|
Back to top |
|
|
Sponsor
|
|
|
MasterMech DD-WRT Novice
Joined: 16 Sep 2021 Posts: 3
|
Posted: Thu Sep 16, 2021 10:17 Post subject: |
|
Seeing as I could only add three attachments are is the remaining screen grabs. |
|
Back to top |
|
|
egc DD-WRT Guru
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
|
Posted: Thu Sep 16, 2021 10:29 Post subject: |
|
Welcome to the forum
Your build is old and deprecated and the General Guestions forum is not the right forum to post these questions.
Have a look at the forum guidelines full of helpful pointers about where to download, where and how to post etc.:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
I will transfer this post to the appropriate forum for you. _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 |
|
Back to top |
|
|
ho1Aetoo DD-WRT Guru
Joined: 19 Feb 2019 Posts: 3004 Location: Germany
|
Posted: Thu Sep 16, 2021 11:35 Post subject: |
|
sure it works as described in the wiki, had the firmware version at that time myself with VAP's and opendns used.
Edit: no I must correct myself, was build r37495M
Maybe just restart the router after it is completely and correctly configured.
Also, you do not use private IP addresses for the VAP's.
180.190 / 160.170 / 170.180 are public networks
I see only a complete misconfiguration, delete everything and start over again properly / also with a current version
Last edited by ho1Aetoo on Thu Sep 16, 2021 17:54; edited 2 times in total |
|
Back to top |
|
|
mrjcd DD-WRT Guru
Joined: 31 Jan 2015 Posts: 6291 Location: Texas
|
Posted: Thu Sep 16, 2021 12:16 Post subject: |
|
ho1Aetoo wrote: | I see only a complete misconfiguration, delete everything and start again properly |
yea
MasterMech,
erase & start over
reread or search for DD-WRT guest net you can better understand ...most ALL of your current config is NOT right |
|
Back to top |
|
|
Per Yngve Berg DD-WRT Guru
Joined: 13 Aug 2013 Posts: 6870 Location: Romerike, Norway
|
Posted: Fri Sep 17, 2021 4:55 Post subject: |
|
Private IP addresses is
192.168.x.x
10.x.x.x
172.16-32.x.x
Put a private IP address on br1 and enable NAT. |
|
Back to top |
|
|
MasterMech DD-WRT Novice
Joined: 16 Sep 2021 Posts: 3
|
|
Back to top |
|
|
ho1Aetoo DD-WRT Guru
Joined: 19 Feb 2019 Posts: 3004 Location: Germany
|
Posted: Fri Sep 17, 2021 8:20 Post subject: |
|
Yes |
|
Back to top |
|
|
|