New Build - 09/03/2021 - r47305

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sun Sep 05, 2021 18:20    Post subject: Reply with quote
Please search the forum; you will see that what you are up in arms over is well-discussed and your throughput is a limitation of the hardware on this firmware. You have been repeatedly told that those are not "errors"; now even by the head developer himself. Any further commentary on this will be split out or removed altogether.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
Gameman Advanced Kid
DD-WRT Guru


Joined: 18 Nov 2012
Posts: 1158

PostPosted: Sun Sep 05, 2021 18:21    Post subject: Reply with quote
thommy181 wrote:
Really you think all that alerts are normal ? I'm wonder why device that have 480 MHz CPU and it's fully gigabit feature can't provide me 300 mbit of internet connection ? Router make many many unnecessary operations during start and work. It's simple answer, why performance is weak. What other users think about this ? I have plan to skip to other firmware. Situation is that and I think the OEM firmware will be better. I don't know why you write posts in rude tone ?


You have PM.

_________________
For people who are new to the dd-wrt forums >> http://www.catb.org/~esr/faqs/smart-questions.html#rtfm

barryware wrote:
It takes a "community" to raise a router..


Internet Connection 1
Some Techicolor modem > Linksys WRT3200ACM

Internet connection 2
Ubiquiti Powerbeam Gen 2 > Netgear R9000

Official (but not really) dd-wrt General Discussion element/matrix chat

https://matrix.to/#/#dd-wrt-private-non-offical:matrix.org
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 260
Location: United States

PostPosted: Sun Sep 05, 2021 22:47    Post subject: Reply with quote
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r47305 std (09/03/21)
Kernel Version: Linux 4.4.282 #3989 SMP Fri Sep 3 04:06:54 +07 2021 armv7l
Reset: no
Operating Mode/Setup: Gateway / AP Unbound JFFS2
Status: running well. thanks BS and dd-wrt community
Aar
DD-WRT User


Joined: 25 Aug 2020
Posts: 56
Location: New York, USA

PostPosted: Mon Sep 06, 2021 6:41    Post subject: Reply with quote
Router/Version: NETGEAR r7000
File/Kernel: netgear-r7000-webflash.bin
Previous/Reset: r47282, No
Mode/Status: WAP
Issues/Errors: None that I've noticed.

Running over 2.5 hours so far and performance is good. Thanks for the build!

_________________
HP EliteDesk 800 G2 Mini PC [i3-6100T] (WAN, DHCP, QoS)
NETGEAR R7000 (AP)
NETGEAR WNDR4300 (Switch)
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 301
Location: Maine, USA

PostPosted: Mon Sep 06, 2021 8:58    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r47305 mega (09/03/21)
Kernel: Linux 4.4.282 #11576 Fri Sep 3 04:58:47 +07 2021 mips
Mode: Gateway/USB
Previous: r46239
Reset?: N
Status: Working
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Mon Sep 06, 2021 12:09    Post subject: Reply with quote
Firmware: v3.0-r47305 std (09/03/21)
Router/Version: Netgear R7000
Kernel: Linux 4.4.282 #3983 SMP Thu Sep 2 03:52:49 +07 2021 armv7l
Previous: v3.0-r47282 std (08/30/21)
Mode/Status: AP wired and wireless / Up and running for 24 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 62.5 °C / WL0 47.5 °C / WL1 52.5 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).

Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Loophole
DD-WRT Novice


Joined: 02 Mar 2020
Posts: 10

PostPosted: Mon Sep 13, 2021 21:54    Post subject: 5GHz Channel Width Selection Reply with quote
Firmware: v3.0-r47305 std (09/03/21)
Router/Version: Netgear R8000
File/Kernel: Linux 4.4.282 #3988 SMP Fri Sep 3 03:59:29 +07 2021 armv7
Previous/Reset: No Reset
Mode/Status: wired/wireless access point, no gateway
Issues/Errors: No channel selection while on VHT80 for 5GHz wl0 and wl2. Is this normal?
d33b0_n4p41m
DD-WRT User


Joined: 10 Sep 2021
Posts: 133

PostPosted: Mon Sep 13, 2021 22:19    Post subject: Reply with quote
Select channel width; save.
Select extension channel; save.
Select channel; save.

It's been discussed.

_________________
An old man said, “Erasers are made for those who make mistakes.” A youth replied, “Erasers are made for those who are willing to correct their mistakes!” Attitude matters! ~ Anonymous
----------
“You are always a student, never a master. You have to keep moving forward.” ~ Conrad Hall
----------
“Life is about moving on, accepting changes and looking forward to what makes you stronger and more complete.” ~ Anonymous
Loophole
DD-WRT Novice


Joined: 02 Mar 2020
Posts: 10

PostPosted: Tue Sep 14, 2021 0:04    Post subject: Reply with quote
d33b0_n4p41m wrote:
Select channel width; save.
Select extension channel; save.
Select channel; save.

It's been discussed.


This is not helpful regarding r8000. I have also tried the nvram methods but still nothing. Can anyone else offer assistance with this?
d33b0_n4p41m
DD-WRT User


Joined: 10 Sep 2021
Posts: 133

PostPosted: Tue Sep 14, 2021 0:27    Post subject: Reply with quote
How is this not helpful? I do not know of any notable changes to this page that would change the UI behavior and the R8000 doesn't have any Quantenna hardware involved.

Per Yngve Berg wrote:
It's not broken, it's by design.

1) set the Channel Width and Save.
2) Set the Extension Channel UU, LL or UL and save
3) The channel list will now show legal channels with the settings 1-2. Select channel and apply.

This is just not a user friendly UI design. To have the page dynamically update, js and Ajax calls must be implemented.

The only other thing that would factor in is browser used and in what environment. Specifically, if you are trying to do this with the same browser you are on the forum with as well as whether or not you are in private/incognito mode with any extensions loaded. Outside of that, it also depends on regulatory domain selected. But you probably need to update to 47381...

_________________
An old man said, “Erasers are made for those who make mistakes.” A youth replied, “Erasers are made for those who are willing to correct their mistakes!” Attitude matters! ~ Anonymous
----------
“You are always a student, never a master. You have to keep moving forward.” ~ Conrad Hall
----------
“Life is about moving on, accepting changes and looking forward to what makes you stronger and more complete.” ~ Anonymous
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum