Posted: Wed Sep 08, 2021 7:48 Post subject: New Build - 09/08/2021 - r47381
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Asus RT-N12B (RT-N12D1)
DD-WRT v3.0-r47381 mega (09/08/21)
Linux 4.4.283 #11716 Wed Sep 8 07:09:15 +07 2021 mips
'dd-wrt.v24-47381_NEWD-2_K3.x_mega.bin'
GUI installl over r47377
WAP + isolated guest net
all worky fine
Joined: 18 Mar 2014 Posts: 12834 Location: Netherlands
Posted: Wed Sep 08, 2021 11:32 Post subject:
Router Model: Linksys E2000 (converted N320)
Firmware Version: DD-WRT v3.0-r47381 mega (09/08/21)
Kernel Version: Linux 4.4.283 #11716 Wed Sep 8 07:09:15 +07 2021 mips
Upgraded: from DD-WRT v3.0-r47282 mega (08/30/21)
Reset: No, not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, WireGuard client working ( speed 20 Mb/s )
Errors: No, only problem is remote administration on WAN port 8080, after each Apply the GUI gives an invalid response..
(This router is internal that is why I use remote administration)
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r47381 std (09/08/21)
Kernel Version Linux 4.4.283 #4024 SMP Tue Sep 7 09:20:59 +07 2021 armv7l
Reset NO
Issues/Errors none so far
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r47381 std (09/08/21) Kernel: Linux 4.4.283 #4024 SMP Tue Sep 7 09:20:59 +07 2021 armv7l Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope. Previous: 09-07-2021-r47377 Status: Working very well so far, still testing. Temperatures: CPU 67.5 °C / WL0 51.2 °C / WL1 56.4 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest.jpg
Description:
Speedtest Over 5.8GHz Wireless.
Filesize:
61.57 KB
Viewed:
7023 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47381 std (09/08/21)
Kernel: Linux 4.4.283 #4024 SMP Tue Sep 7 09:20:59 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound & CTF & FA Enabled. NAT/QoS Off
Reset: No, not this time
Previous : r47377
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 76.4 °C / WL1 56.1 °C
Load: 0.00, 0.03, 0.01
Uptime 8h30m
Errors: No, not at this moment.
Router/Version: Asus RT-N16
File/Kernel: dd-wrt.v24-47381_NEWD-2_K3.x-big-RT-N16.trx / Linux 4.4.283 #11712 Wed Sep 8 07:04:19 +07 2021 mips
Previous/Reset: AdvancedTomato-> OpenWRT-> DD-wrt chain install per https://wiki.dd-wrt.com/wiki/index.php/Asus_RT-N16 .
Mode/Status: Repeater/Bridge operational. Per https://wiki.dd-wrt.com/wiki/index.php/Repeater_Bridge#Broadcom . Working with Verizon FIOS G3100 as primary. NG-mixed mode required for successful wireless client to connect to secondary router. SPI firewall enabled.
Issues/Errors: Status > Sysinfo says DHCP Server "Enabled - Running" . Under Status > Lan > DHCP Status says "DHCP Server Disabled". Connected clients correctly obtain IP from primary router, I think.
Firmware: v3.0-r47381 std (09/08/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.283 #4024 SMP Tue Sep 7 09:20:59 +07 2021 armv7l
Previous: v3.0-r47305 std (09/03/21)
Mode/Status: AP wired and wireless / Up and running for 24 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.6 °C / WL1 51.9 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Otherwise, no issues.
Load Average: 0.14, 0.07, 0.02
Temperatures: CPU 70.2 °C / WL0 50.5 °C / WL1 56.1 °C
I guess the R7000 wiki is a little outdated. Through trial and error and piecing together some threads, I got my speeds to 914 Mbps down and 88 Mbps up through ethernet on Shaw Fibre+. Requires CTF, CTF & FA, and QoS off.
Router GUI style and themes seem a little confusing. Are they 2 different theming methods? Some of the GUI styles don't seem to change anything. Maybe this is the cause of the Syslog errors?
I'm just glad I didn't need a new router to achieve these speeds.
Joined: 14 Sep 2021 Posts: 21 Location: Western Hemisphere
Posted: Tue Sep 14, 2021 3:14 Post subject:
Router/Version: Linksys E2500 ver. 1
File/Kernel: dd-wrt.v24-47381_NEWD-2_K3.x_mega-e2500.bin
Previous/Reset: dd-wrt.v24-44715_NEWD-2_K3.x_mega-e2500 / No Reset
Mode/Status: Repeater, OpenVPN
Issues/Errors: none so far, up 48hr, When testing Kill Switch blocks traffic when VPN down, but when VPN goes back up needed to reboot to reconnect. At same time tested ASUS-Merlin router it auto-reconnected VPN when back up. Is this current design of kill switch?
Speeds much improved over previous version on VPN.
Thank you so much! _________________ ASUS 7xAC68U
Linksys 3200ACM, 1900ACSv2, 3x1900AC, E3000, 5xE2500
Netgear 3xR7000, R6700, R6400
If able, give more than you take. Make the world better.
Linksys E2500
DD-WRT v3.0-r47381 mega (09/08/21)
Linux 4.4.283 #11716 Wed Sep 8 07:09:15 +07 2021 mips
'dd-wrt.v24-47381_NEWD-2_K3.x_mega.bin'
Don't remember which build I installed it over but it was reset & reconfig
as a simple WAP. It replaced an ASUS RT-N12D1 that got borked when I installed
one of BS test builds yesterday ...yea the RT-N12D1 was fixed but just laying here
beside me since the E2500 is doing quite well
uptime 11:23
all worky fine