Posted: Mon Aug 30, 2021 8:26 Post subject: New Build - 08/30/2021 - r47282
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Upgraded WRT1200AC v1's from r47256 to r47282 using Brave 1.10.97 (64-bit) running on Linux Mint 20.2 OS hardwired via Cat6.
Successful update and reboot. No reset, nothing disabled prior to update, uptime approx 2+ hrs, wired/wireless connected, vpn up immediately (Expressvpn). SFE, QoS and IPv6 are always disabled. OpenVPN client/DNSMasq and radios always enabled. I do not have any Apple devices. I do not use NAS.
Kernel Version Linux 4.9.281 #2823 SMP Mon Aug 30 01:44:14 +07 2021 armv7l
OpenVPN 2.5.3 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Aug 30 2021
library versions: OpenSSL 1.1.1l 24 Aug 2021 LZO 2.09
Joined: 12 Dec 2007 Posts: 780 Location: Pittsburgh, PA USA
Posted: Mon Aug 30, 2021 14:28 Post subject:
Router/Version: WRT1900AC v1
File/Kernel: r47282 standard
Previous/Reset: r47206 standard
Mode/Status: Gateway / OpenVPN server / Wireguard server
Issues/Errors: No issues. Smooth upgrade using Edge. Previously saw some slowness on 5GHz on one laptop with an Intel chipset, but seems to be better in this build. _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
Upgraded WRT3200ACM v1's from r47256 to r47282 using Firefox 91.0.2 (64-bit) running on Windows 10 21H1 Build 19043.1165 hardwired via Cat6.
Successful update and reboot. Initially it had no issues, but it ended up maxing CPU usage, which usually on the 3200ACM means it requires a settings reset, which I did, and it is now working without any issues with the following features: OpenVPN Client, custom DNS, firewall script.
WL0 is using mixed mode with 80Mhz
WL1 is using mixed mode with 20 Mhz
WL2 shows up in GUI, but disabled
Using Apple devices without issues as well as consoles.
CPU usage is incredibly low (.01) with all this connected, so bravo. _________________ Router: Linksys WRT3200ACM WLAN0 and 1 have same SSID
88W8964 802.11ac WLAN0 Mode AP VHT80 80MHz Mixed Mode Channel and Extension Channel Auto Extension LL-6
88W8964 802.11ac WLAN1 Mode AP 20 MHz Mixed Mode Channel Auto
SD8887 802.11ac disabled but visible on GUI and CLI
TX Power 18 dBm
Antenna Gain 0 dBi
U-APSD (Automatic Power Save)Enabled
Protection Mode None
RTS Threshold Disabled
Short Preamble Disabled
Short GI Enabled
Single User Beamforming Enabled
Multi User Beamforming Enabled
AP Isolation Disabled
Beacon Interval 100
DTIM Interval 2
WMM Support Enabled
Radar Detection Disabled
ScanList default
Sensitivity Range (ACK Timing) 500 (Default: 500 meters)
Max Associated Clients 256 (Default: 256 Clients)
Minimum Signal for authenticate -128
Minimum Signal for connection -128
Poll Time for signal lookup 10
Amount of allowed low signals 3
Wireless security is WPA2 Personal CCMP-128 only
QAM256 is on
Posted: Wed Sep 01, 2021 11:19 Post subject: super
Linksys WRT3200ACM
DD-WRT v3.0-r47282
no reset
yeahhh, I think the problem with 2.4Gz connection is solved. I connect with my S10+ and try a speedtest a couple of time. This Version looks better than all other before. I hope this version will run stable, if not I will come back!
Router/Version: Linksys WRT32X DD-WRT v3.0-r47282 std (08/30/21)
File/Kernel: Linux 4.9.281 #2823 SMP Mon Aug 30 01:44:14 +07 2021 armv7l
Previous/Reset: 08-25-2021-r47256 no reboot after update
Mode/Status: AP mode only
Issues/Errors: No error
Uptime:24 hr without crash. System normal and http response faster than previous build r47225.
Highly recommended update this build.
Posted: Thu Sep 02, 2021 11:02 Post subject: Re: Apple WiFi on this release?
giles02134 wrote:
Any experience with wireless iOS devices on this release?
Hello, the previous versions had also problems with other clients like "android e.g. S10+").
Please try this version in my case it work very stable without breaks. I hope that special the 2.4GHz problem was solved now, for the moment it looks good!
Upgraded WRT3200ACM v1's from r47256 to r47282 using Firefox 91.0.2 (64-bit) running on Windows 10 21H1 Build 19043.1165 hardwired via Cat6.
Successful update and reboot. Initially it had no issues, but it ended up maxing CPU usage, which usually on the 3200ACM means it requires a settings reset, which I did, and it is now working without any issues with the following features: OpenVPN Client, custom DNS, firewall script.
WL0 is using mixed mode with 80Mhz
WL1 is using mixed mode with 20 Mhz
WL2 shows up in GUI, but disabled
Using Apple devices without issues as well as consoles.
CPU usage is incredibly low (.01) with all this connected, so bravo.
Can you identify since which version the Apple devices started working again? (connected to wifi, no internet, wifi off/on > working) _________________ Linksys WRT3200ACM
Can you identify since which version the Apple devices started working again?
Maybe he never experienced this problem, and maybe r47256 or r47282. You tell us for WRT3200ACM.
Too many "maybe's"... I prefer to see someone affirm this doesn't happens anymore, then I'll try the build to confirm or deny. Since he mentioned particularly the Apple clients.
The last 10 builds I tried after the golden one were "this issue was fixed", while persisted, and a lot of folks out there still deny the existence of this problem. _________________ Linksys WRT3200ACM
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Thu Sep 02, 2021 16:26 Post subject:
Please read and heed the OP as well as my previous comment. This thread isn't to ask questions. Flash and report, provide feedback and exact steps and configurations to reproduce issues and errors. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net