New Build - 08/30/2021 - r47282

Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Mon Aug 30, 2021 8:26    Post subject: New Build - 08/30/2021 - r47282 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r47256 (GitHub mirror)

Notes:
OpenVPN 2.5.3: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210606/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• Added support Netgear AC2100, AC2400, R6220, R6260, R6350, R6700v2, R6800, R6850, R7450, WAC124 & WNDR3700v5.
SmartDNSMiniDLNAUnboundCoovaChillidnsmasqPrivoxySquidiperf3cakeTorFreeRADIUS OpenSSL
In-kernel Samba (ksmbd 3.4.1+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver+
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed; likely no longer required.
• MAC Filtering fixed in WebUI (changesets 47184-47205).

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
thecrazy
DD-WRT Novice


Joined: 30 Aug 2021
Posts: 4

PostPosted: Mon Aug 30, 2021 21:01    Post subject: Reply with quote
Router/Version: Dlink DIR-882 A1
File/Kernel: factory-to-ddwrt.bin
Previous/Reset: Dlink firmware 1.30b06
Mode/Status: AP
Issues/Errors: 1- Web interface doesn't always load properly and is sometimes unresponsive for a long time.
2- Unable to get IP using DHCP on WAN, I suspect the switch's settings may be wrong, worked right away when I downgraded to r44715.

This was my first install of DD-WRT on this router.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Mon Aug 30, 2021 23:35    Post subject: Reply with quote
I can only guess how you managed to have issues. No steps to reproduce included, no screenshots, nothing.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
thecrazy
DD-WRT Novice


Joined: 30 Aug 2021
Posts: 4

PostPosted: Tue Aug 31, 2021 5:15    Post subject: Reply with quote
Sorry completely jumped the gun on that one.

I put the router in recovery mode and flashed the factory to DD-WRT file. Right after I noticed the web interface was unresponsive, going out completely for a long time when saving settings and when changing to other tabs ie.: from wireless to status.

So I put the router in recovery mode again, flashed r44715, and everything worked right away. The internet was back on, the web interface worked properly etc. Only had to setup the wifi.

Just now I upgraded to r47256 from the web interface and everything is also working fine.

I'm not sure about the switch issue. Only saying this cause the DHCP renew on the wan did nothing (it was instant and the ip stayed at 0,0,0,0) and the switch settings are different in r47256.

If I remember correctly, the wan port was set to vlan2 and port 1-2-3-4 were on vlan1.

r47256 has the wan on vlan1 and 1-2-3-4 on vlan0


Last edited by thecrazy on Tue Aug 31, 2021 5:33; edited 1 time in total
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Tue Aug 31, 2021 5:30    Post subject: Reply with quote
You should be able to change the settings to the proper ones both on switch config tab and networking tab, save, and reboot. You may also wish to verify via telnet/ssh the output of swconfig list; swiconfig dev ____ show (use the device(s) in the list from previous output). If that doesn't solve the issue, I will contact BrainSlayer.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
thecrazy
DD-WRT Novice


Joined: 30 Aug 2021
Posts: 4

PostPosted: Tue Aug 31, 2021 5:34    Post subject: Reply with quote
Will an upgrade from the web interface preserve the switch config from r47256?
bluestreak711
DD-WRT Novice


Joined: 01 Sep 2021
Posts: 8

PostPosted: Wed Sep 01, 2021 19:23    Post subject: Reply with quote
Router/Version: Netgear Nighthawk R6700 v2

File/Kernel: factory-to-ddwrt.img and after in the DD-WRT GUI, I flashed to r6700v2-webflash.bin

Previous/Reset: I bought the router second hand and did a basic reset before flashing.

Mode/Status: AP

Issues/Errors: No errors as of it, but I have not had much time to use it yet.

Shout out to kernel-panic69 for a super quick reply and updating the wiki to make it possibe!! Thank you so very much!!!!
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Wed Sep 01, 2021 19:42    Post subject: Reply with quote
thecrazy wrote:
Will an upgrade from the web interface preserve the switch config from r47256?


The only time things really change is when you wipe the nvram completely via 'nvram erase && reboot' or you reset to defaults (as long as you do not do any custom changes to nvram variables via 'nvram set' and then 'nvram commit'. What people fail to realize is that all the nvram settings are checked on boot and if they do not exist, they are written. A lot of recent changes related to Broadcom and other devices for that page may have left some anomalies, but I was told that those settings can be set to the correct ones via webUI, saved, then reboot the router and it should be okay. If this is not true in your situation, need the output of swconfig list, swconfig dev ____ show.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
bluestreak711
DD-WRT Novice


Joined: 01 Sep 2021
Posts: 8

PostPosted: Tue Jan 24, 2023 23:13    Post subject: 2.4G Wifi does not work on R6700v2 Reply with quote
2.4G Wifi does not work on R6700v2

A wide range of devices won't connect to the 2G and when you try, it just bounces off.

Is there a fix?
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Tue Jan 24, 2023 23:47    Post subject: Reply with quote
Is the issue still present in 51440?

https://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2023/01-19-2023-r51440/netgear-r6700v2/

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy

PostPosted: Sat Jan 28, 2023 1:45    Post subject: Re: 2.4G Wifi does not work on R6700v2 Reply with quote
bluestreak711 wrote:
2.4G Wifi does not work on R6700v2 [...]
Is there a fix?
Fixed in the 51506 release. Hopefully it also fixes the wife's condo slow 2.4GHZ (DIR-810LB1 k3.10 ramips). Wink
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250
|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum