Posted: Sun Aug 01, 2021 5:34 Post subject: New Build - 08/01/2021 - r47117
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router Status: 2 x Netgear 7800's r47117 uptime 36 hours, WIFI performance is good and stable.
UPDATE: 13 days uptime - very stable and reliable build for me.
Kernel: Linux router2 4.9.277 #346 SMP Sun Aug 1 01:09:38 +07 2021 armv7l DD-WRT
Upgrade: via CLI from r47086 (which was running fine for 8+ days). No issues with upgrade. Did not reset.
Issues:
1) GUI can be painfully slow at times. Opening a telnet also freezes when GUI is acting up - no prompt. Firefox is the only browser that sort of works on my Macbook.
Linksys WRT3200ACM: gateway mode, DNSMasq for DNS and DHCP, Wireguard client (Mullvad), Firewall enabled, QoS enabled HTB-CAKE, PBR enabled, SFE disabled. NAS disabled. WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel 1, BI=100, DTIM=2 custom config: basic_rates=60 120 240 supported_rates=60 90 120 180 240 360 480 540. 5ghz: AC/N mixed, 40mhz channel width, channel 44+upper, BI=100, DTIM=2. Both radios: WPA2-CCMP-128, strict rekey enabled, 802.11r enabled, 802.11w disabled, disable eapol retries disabled.
Linksys WRT1900ACSv1: wifi disabled - using it as a semi-intelligent switch only. SFE enabled. Can't get wifi to work reliably post-r44048.
Two Netgear r7800s - as hardwired WAPs in router-mode with nearly identical WIFI settings to the 3200ACM above, just different wifi channels and BI=300, DTIM=1. Vanilla firmware, SFE enabled, DNSmasq disabled, NAS disabled, firewall disabled, QoS disabled,
Clients: Apple MACOS x 4, IOS x 4, Apple TV, Chromecast Audio x 2, Eufy doorbells, Lutron Caseta, Axis Camera, Samsung TV, Nest thermostat, EtekCity outlets (Espressif), BlueSound/BlueOS devices...
Last edited by pbphoto on Sat Aug 14, 2021 12:24; edited 1 time in total
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r47117 std (08/01/21)
Kernel Version: Linux 4.9.277 #346 SMP Sun Aug 1 01:09:38 +07 2021 armv7l
Previous/Reset: r47090 / No, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-PD,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: WiFi,QoS,ttraff,SFE,Telnet,NAS,Samba
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r47117 std (08/01/21)
Kernel Version: Linux 4.9.277 #346 SMP Sun Aug 1 01:09:38 +07 2021 armv7l
Previous/Reset: r47090 / No, CLI Update
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: Static WAN,IPv6 6to4,WiFi Vannilla,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45
Services Disabled: QoS,ttraff,SFE,Telnet,NAS,Samba
All running for over 7 hours
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r47117 std (08/01/21) (prev. DD-WRT v3.0-r47097 std (07/29/21))
Kernel: Linux 4.9.277 #346 SMP Sun Aug 1 01:09:38 +07 2021 armv7l
Mode: Gateway, 2.4G and 5G wifi, 1VAP @2.4G with different SSID, Wireguard for external access, WAN to 4G, Keep Alive reboot 6:02 in the morning
Reset: No
Status: Ok, since release.
Joined: 19 Nov 2008 Posts: 274 Location: Madison, CT, US
Posted: Tue Aug 03, 2021 14:59 Post subject:
Router/Version: Netgear R7800
Previous/Reset: r47097) / No
Status: OK except NAS not working for usb drives but works for Truenas server.
Issues: USB is mounting drives but NAS cannot open drives. Already used fdisk and diskpart to clean drives.
Vanilla firmware on 5 GHz , Vanilla on 2.4 GHz on both
WDS main and station _________________ Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)
Router/Version: Netgear WNDR4300 v1 File/Kernel: Linux 3.18.140-d6 #121903 Sun Aug 1 05:47:12 +07 2021 mips Previous/Reset: No Mode/Status: Good Issues/Errors: None
Went from Factory to the 2014 version mentioned in the Wiki entry then directly from that version to r47117 using the webflash file. Then did a factory reset from the dd-wrt interface on r47117
Verified that both wifi interfaces were able to see traffic in site survey
Linksys EA8500 AP w/USB hdd, samba, dlna, & Transmission
DD-WRT v3.0-r47117 std (08/01/21)
Linux 4.9.277 #344 SMP Fri Jul 30 22:58:19 +07 2021 armv7l
Serial install over Linksys FW
Uptime 20+hrs, all good so far