New Build - 07/26/2021 - r47090

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1851
Location: Hung Hom, Hong Kong

PostPosted: Tue Jul 27, 2021 10:53    Post subject: Reply with quote
kushwavez wrote:
Router/Version: ASUS RT-AC56U
File/Kernel: DD-WRT v3.0-r47090 std (07/26/21) / Linux 4.4.276 #3717 SMP Thu Jul 22 03:10:07 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r47086 std (07/22/21) / No
Mode/Status: Gateway, WireGuard, DHCP, QoS Off, CTF
Issues/Errors:

Flow Acceleration is not showing up in GUI.
According to the wiki, the chip is supported (Northstar)./7444

Did you turn off and on the router after firmware upgrade?

The last time I Restore Factory Defaults after firmware upgrade, then a soft boot, CTF and FA were also NOT available. But after a few cold boots, they appeared again.

Is it normal? I dunno.... I were also not sure whether I edited certain settings that triggered their re-appearance.


_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw
Sponsor
kushwavez
DD-WRT Novice


Joined: 15 Jun 2020
Posts: 32

PostPosted: Tue Jul 27, 2021 10:57    Post subject: Reply with quote
Quote:
The last time I Restore Factory Defaults after firmware upgrade, then a soft boot, CTF and FA were also NOT available. But after a few cold boots, they appeared again.


Yes, I did. It is also in the wiki that you'll need to restart your router once to get Flow Acceleration, and QoS needs to be Off.
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1847
Location: Canada

PostPosted: Tue Jul 27, 2021 20:44    Post subject: Reply with quote
HOME Wired Multicast ISP 4K TV Network

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47090 std (07/26/21)
Kernel Version: Linux 4.4.276 #3717 SMP Thu Jul 22 03:10:07 +07 2021 armv7l
Previous/Reset: r47086 / No, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,SFE,SSH,Syslog
Services Disabled: WiFi,QoS,ttraff,Telnet,NAS,Samba


OffSite #1

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47090 std (07/26/21)
Kernel Version: Linux 4.4.276 #3717 SMP Thu Jul 22 03:10:07 +07 2021 armv7l
Previous/Reset: r47086 / No, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba


TESTING at Home for OffSite #2

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r47090 std (07/26/21)
Kernel Version: Linux 4.4.276 #3717 SMP Thu Jul 22 03:10:07 +07 2021 armv7l
Previous/Reset: r47086 / No, CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none /none
Services Used: DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba
This Router is NOT Deployed to Off-Site #2 yet, TESTING.


All running over 24hours.


Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r52330 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 332

PostPosted: Wed Jul 28, 2021 18:46    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r47090 std (07/26/21)
Kernel: Linux 4.4.276 #3717 SMP Thu Jul 22 03:10:07 +07 2021 armv7l
Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off.
Reset: Nope.
Previous: 07-08-2021-r47033
Status: Working really well so far, still testing.
Temperatures: CPU 64.7 °C / WL0 50.0 °C / WL1 55.2 °C



Speedtest-1.jpg
 Description:
Speedtest over 5.8GHz Wireless
 Filesize:  60.4 KB
 Viewed:  1613 Time(s)

Speedtest-1.jpg



Logs.txt
 Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!

nvram set console_debug=1

cat /var/log/messages (Initial Flash)
dmesg (Initial Flash)
cat /proc/cpuinfo
cat /tmp/dnsmasq.conf
cat /tmp/DNSCache.log
cat /tmp/unbound

Download
 Filename:  Logs.txt
 Filesize:  259.71 KB
 Downloaded:  88 Time(s)

Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Thu Jul 29, 2021 12:08    Post subject: Reply with quote
HOME Wired Multicast ISP 4K TV Network

Router: R7000
File: DD-WRT v3.0-r47090 std (07/26/21)
Kernel Version: Linux 4.4.276 #3717 SMP Thu Jul 22 03:10:07 +07 2021 armv7l
Previous/Reset: r41813 / factory reset from gui
Mode: GW
Issues/Errors: Privoxy in transparent mode non-functional. Blocks connection to internet.

I host a website as well as game servers for a few friends behind this router. Previous version worked very well. So far this version is working well, other than the Privoxy. I still have a lot of work to redo and tweak the configuration. I will post back with any issues.

I try to keep the updates to a minimum because this is a amateur production environment. If it's working well I don't update, but I was concerned about the recent Linux exploit and thought it was time for an update.

_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Thu Jul 29, 2021 12:40    Post subject: Reply with quote
Firmware: v3.0-r47090 std (07/26/21)
Router/Version: Netgear R7000
Kernel: Linux 4.4.276 #3717 SMP Thu Jul 22 03:10:07 +07 2021 armv7l
Previous: v3.0-r47086 std (07/22/21)
Mode/Status: AP wired and wireless / Up and running for 36 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.9 °C / WL0 47.0 °C / WL1 52.0 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).

Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
hemirunner426
DD-WRT Novice


Joined: 29 Jul 2021
Posts: 5

PostPosted: Thu Jul 29, 2021 14:40    Post subject: Reply with quote
Current basic AC68U setup (subject to change of course):
- PPPoE WAN
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Not available
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, 2.4G - 2VI, 5G 1VI
- 3 VLANs
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

FA dropdown is not available. dmesg is as follows:
attaching FA
CHIPID 53010, rev 5
no valid FA Mode.
attach ctf for eth%d
_ctf_attach:attach eth%d
bind ctf to eth if
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum