[Ld%j&2hYz%]

created second interface, different encryption, different ssid

when scanning see only my main ssid with encryption from main ssid.

what have i done wrong?

[jpark]

I haven't done much with v24 because it still has some problems, but I've noted some things.

Since each virtual device has the same MAC, you will only see one of the SSIDs on a scan with, for example, network stumbler. Or, you may see more than one SSID, but only one at a time.

Its is probably best to broadcast only one SSID. But you should be able to connect to any virtual device, regardless of the broadcast status of the SSID.

[Ld%j&2hYz%]

so... main ssid broadcasting is disabled.
i've tried to scan plenty of times - but newer seen that other ssid

okay.. if netstumbler not good enought....

ill try airopeek NX

[Ld%j&2hYz%]

well.. solved.
finally found ssid with airopeek.
and connected 2 it.

one else.

if i disable briged mode, i need 2 enter ip adress... of what?

i thought it unbriged from my subnet - so.. ready 2 enter a subnet for ssid users... but ip?