Posted: Wed Jul 21, 2021 19:15 Post subject: Upgrade
Router/Version: TP-Link Archer C7 v2 (x2)
File/Kernel:
Firmware Version
DD-WRT v3.0-r47074 std (07/20/21)
Kernel Version
Linux 3.18.140-d6 #121228 Tue Jul 20 06:28:11 +07 2021 mips
Previous/Reset: r47040, One of them was recently reset for r47033. All settings were then input manually by hand, no using of a backup file.
Mode/Status: WDS Station
Issues/Errors: Really slow, inconsistent Internet speeds. My main router, the r7800, I can consistently get ~80MB/s download. The Archer C7s, I expect a drop from that due to it being a WiFi to WiFi connection. But ~1-2 MB/s then <100 KB/s is not reasonable. Something changed since r47000. http://www.dslreports.com/speedtest/69010571.png
Router/Version: Netgear R7800
File/Kernel: r47074
Previous/Reset: r47040, no
Mode/Status: WDS AP
Issues/Errors: None. See above.
Router/Version: D-Link DIR-862L A1
File/Kernel: r47074
Previous/Reset: r47040, no
Mode/Status: WDS Station
Issues/Errors: Working. Speeds are ~50MB/s.
Router/Version: TP-Link WDR3600 v1
File/Kernel: r47074
Previous/Reset: r47040, no
Mode/Status: WDS Station, outlying router, no main connection to Netgear R7800. Can't test properly at the moment due to the issues with the Archer C7s above.
Issues/Errors: Can't test properly. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Wed Jul 21, 2021 20:28 Post subject: Re: Upgrade
ian5142 wrote:
Router/Version: TP-Link Archer C7 v2 (x2)
File/Kernel:
Firmware Version
DD-WRT v3.0-r47074 std (07/20/21)
Kernel Version
Linux 3.18.140-d6 #121228 Tue Jul 20 06:28:11 +07 2021 mips
Previous/Reset: r47040, One of them was recently reset for r47033. All settings were then input manually by hand, no using of a backup file.
Mode/Status: WDS Station
Issues/Errors: Really slow, inconsistent Internet speeds. My main router, the r7800, I can consistently get ~80MB/s download. The Archer C7s, I expect a drop from that due to it being a WiFi to WiFi connection. But ~1-2 MB/s then <100 KB/s is not reasonable. Something changed since r47000. http://www.dslreports.com/speedtest/69010571.png
Router/Version: Netgear R7800
File/Kernel: r47074
Previous/Reset: r47040, no
Mode/Status: WDS AP
Issues/Errors: None. See above.
Router/Version: D-Link DIR-862L A1
File/Kernel: r47074
Previous/Reset: r47040, no
Mode/Status: WDS Station
Issues/Errors: Working. Speeds are ~50MB/s.
Router/Version: TP-Link WDR3600 v1
File/Kernel: r47074
Previous/Reset: r47040, no
Mode/Status: WDS Station, outlying router, no main connection to Netgear R7800. Can't test properly at the moment due to the issues with the Archer C7s above.
Issues/Errors: Can't test properly.
2.4, 5ghz? if 5ghz that and dir-862L have the same radios, one is fine according to ur report while the other isnt.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
I did a quick test for Samba and it seems to work as intended.
USB stick with two ext2 shares one named opt the other jffs.
Mount automatically.
I do not have any user(s) made, no encryption, public shares with rw.
[b]The shares are readily accessible without password etc. from Windows 10 and via winSCP
Did you even do a full factory reset? or did you flash to the new build without doing a factory reset?
Exactly how did you set this up that you can use samba on the newest build without having to create a user account? _________________ For people who are new to the dd-wrt forums >> http://www.catb.org/~esr/faqs/smart-questions.html#rtfm
barryware wrote:
It takes a "community" to raise a router..
Internet Connection 1
Some Techicolor modem > Linksys WRT3200ACM
Internet connection 2
Ubiquiti Powerbeam Gen 2 > Netgear R9000
Official (but not really) dd-wrt General Discussion element/matrix chat
Posted: Thu Jul 22, 2021 0:51 Post subject: Re: Upgrade
tatsuya46 wrote:
2.4, 5ghz? if 5ghz that and dir-862L have the same radios, one is fine according to ur report while the other isnt..
The Archer C7s are connected on 2.4GHz to the main R7800. One of the 862Ls is connected on 2.4GHz as well, same main AP (R7800). The 862L, I can get great speeds on WiFi, 2.4GHz or 5GHz. The Archer C7, I was actually hardwired for that speed test. It was connected to the main R7800 on the 2.4GHz network.
I just did an in place upgrade to 47074 today, on all routers. No change in the problem. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
[b]Copy of Samba config.[/b]
[global]
log level = 1
netbios name = DD-WRT
server string = test
syslog = 10
encrypt passwords = true
preferred master = yes
use sendfile = yes
aio read size = 2048
aio write size = 2048
large readwrite = yes
security = user
oplocks = yes
mangled names = no
max stat cache size = 64
workgroup = WORKGROUP
bind interfaces only = yes
guest account = nobody
map to guest = never
smb passwd file = /var/samba/smbpasswd
private dir = /var/samba
passdb backend = smbpasswd
log file = /var/smbd.log
max log size = 1000
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=262144 SO_RCVBUF=262144
read raw = yes
write raw = yes
max xmit = 65536
dead time = 15
getwd cache = yes
lpq cache time = 30
server min protocol = SMB2_10
server max protocol = SMB3_11
printing = none
load printers = No
usershare allow guests = Yes
smb3 encryption = no
[jffs]
comment = jffs
path = /jffs
read only = no
guest ok = no
valid users = test
force user = root
log shows samba is running. so usually just a config error _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 18 Mar 2014 Posts: 12883 Location: Netherlands
Posted: Thu Jul 22, 2021 6:45 Post subject:
Gameman Advanced Kid wrote:
egc wrote:
For details of my R7800 see above.
I did a quick test for Samba and it seems to work as intended.
USB stick with two ext2 shares one named opt the other jffs.
Mount automatically.
I do not have any user(s) made, no encryption, public shares with rw.
[b]The shares are readily accessible without password etc. from Windows 10 and via winSCP
Did you even do a full factory reset? or did you flash to the new build without doing a factory reset?
Exactly how did you set this up that you can use samba on the newest build without having to create a user account?
Home Main Gateway Router Router/Version: R7800
File/Kernel: DD-WRT v3.0-r47074 std (07/20/21)
Previous/Reset: r47033 / No, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-PD,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: WiFi,QoS,ttraff,SFE,Telnet,NAS,Samba
Home Main AP Router Router/Version: R7800
File/Kernel: DD-WRT v3.0-r47074 std (07/20/21)
Previous/Reset: r47033 / No, CLI Update
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: Static WAN,IPv6 6to4,WiFi Vannilla,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45
Services Disabled: QoS,ttraff,SFE,Telnet,NAS,Samba
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
