Posted: Mon Jun 21, 2021 7:39 Post subject: New Build - 06/21/2021 - r46979
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Mon Jun 21, 2021 15:27 Post subject:
The same problem in my Netgear WNR3500L v2. I'm make clean configuration and Internet is connected to router, but it isn't available on workstations. I'm analyze problem and I'm decide to restore factory defaults one more time. After restore I'm login to GUI and MACs are stored still. MACs was incorrect - the same MAC was for LAN and WAN interface. I don't know why is that situation. In the next step I'm restore factory defaults by button on case. I'm make full configuration one more time and internet start to work. In first try problem is the same. Router have all services working, but internet unavailable on workstations. Actually everything work good. You must to make another tries with totally fresh configuration.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-46979 NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46979 big (06/21/21) (will go back to DD-WRT v3.0-r46949 big (06/13/21))
Kernel: Linux 4.4.273 #10309 Mon Jun 21 03:51:41 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Active IP Connections on STATUS Router states "0" even when connected with Webif and SSH.
Wireguard Endpoint does not connect, tunnel does not establish.
Went back to r46949, Problems gone. Reflashed 46979 --> problems appeared again.
Settings uploaded to https://i.imgur.com/xsqMQpm.jpg
(I changed /32 to /24 for testing purposes, but to no avail).
Same problem as r46958.
Attached /var/log/messages. Let me know if further information is needed
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Mon Jun 21, 2021 16:14 Post subject:
thommy181 wrote:
The same problem in my Netgear WNR3500L v2. I'm make clean configuration and Internet is connected to router, but it isn't available on workstations. I'm analyze problem and I'm decide to restore factory defaults one more time. After restore I'm login to GUI and MACs are stored still. MACs was incorrect - the same MAC was for LAN and WAN interface. I don't know why is that situation. In the next step I'm restore factory defaults by button on case. I'm make full configuration one more time and internet start to work. In first try problem is the same. Router have all services working, but internet unavailable on workstations. Actually everything work good. You must to make another tries with totally fresh configuration.
Router/Version: RT-AC66U/Asus RT-AC66U
File DD-WRT v3.0-r46979 giga (06/21/21)
Kernel: Previous/Reset: 46949/no
Mode/Status: access point, MAC filter/not working
Issues/Errors: Rebooting multiple times after upgrade every few seconds. Finally the configuration was reset to defaults. After this I tried to reconfigure the router as an access point from scratch and the rebooting is still starting after configuration was completed. Could not find out the step which causes the reboot. I disabled the "Reset after 5 Bootfails" to keep the configuration and restored 46949 via ASUS mini webserver. Configuration was working after going back to 46949.
Router/Version: E3000/Linksys E3000
File DD-WRT v3.0-r46979 mega (06/21/21)
Kernel: Linux 4.4.271 #9906 Sat Jun 5 04:02:55 +07 2021 mips
Previous/Reset: 46885/no
Mode/Status: access point, MAC filter/not working
Issues/Errors: The upgrade was successful and the router was running but stopped responding after 2-3hours. Restart does not bring it back. I need to recover it again.
My RT-AC88U routers have still the same problems as described in: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=329353 _________________ Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
Last edited by mj666 on Mon Jun 21, 2021 20:01; edited 5 times in total
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Mon Jun 21, 2021 18:15 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r46979M Community Build (06/21/21)
Kernel Version: Linux 4.4.273 #1 SMP Mon Jun 21 13:05:31 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r46974 std (06/18/21)
Reset: No not this time
Status: Up and running for 6 hours, basic setup as Gateway, static leases, OpenVPN client with Policy Based Routing up and running, 2,4GHz and 5Ghz working, USB storage NAS working, WireGuard server working with 8 clients (phones, Windows and two other routers for site-to-site setup).
Posted: Tue Jun 22, 2021 0:26 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r46979 std (06/21/21) Kernel: Linux 4.4.273 #3499 SMP Mon Jun 21 02:36:17 +07 2021 armv7l Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 06-18-2021-r46974 Status: Working really well so far, still testing. CPU really hot! Temperatures: CPU 67.5 °C / WL0 51.3 °C / WL1 56.6 °C
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Joined: 08 May 2018 Posts: 14208 Location: Texas, USA
Posted: Tue Jun 22, 2021 2:29 Post subject: Re: Netgear Nighthawk R7000
twindragon6 wrote:
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r46979 std (06/21/21) Kernel: Linux 4.4.273 #3499 SMP Mon Jun 21 02:36:17 +07 2021 armv7l Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 06-18-2021-r46974 Status: Working really well so far, still testing. CPU really hot! Temperatures: CPU 67.5 °C / WL0 51.3 °C / WL1 56.6 °C
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r46949 std (06/13/21) Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 06-05-2021-r46885 Status: Working so far, still testing. High CPU temps. Poor throughput compared to 06-05-2021-r46885. Temperatures: CPU 67.5 °C / WL0 50.6 °C / WL1 55.9 °C
if i contantly see messages about high cpu temp i will remove the temperature sensor from gui. i'm not sitting in your router and heating it up. broadcom builds that hot cpu and these temperatures are absolutelly normal and it was always like that. these values are for informational use and not for reporting or commenting it
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r46979 std (06/21/21)
Previous/Reset: r46885 / No, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,SFE,SSH,Syslog
Services Disabled: WiFi,QoS,ttraff,Telnet
OffSite #1
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r46979 std (06/21/21)
Previous/Reset: r46885 / No, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet
Router/Version: E3000
File/Kernel: DD-WRT v3.0-r46979 mega (06/21/21)
Previous/Reset: r46885 / No, Remote GUI Update
Mode/Status: Client-Bridge / Working Well
Issues/Errors: none / none
Services Used: WiFi 5G,NTP,SSH,Syslog,VLANx,BRx,
Services Disabled: WAN,QoS,ttraff,SFE,Telnet
TESTING at Home for OffSite #2
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r46979 std (06/21/21)
Previous/Reset: r46885 / No, CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none /none
Services Used: DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: SFE,QoS,ttraff,Telnet
This Router is NOT Deployed to Off-Site #2 yet, TESTING.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531