Posted: Wed Jun 16, 2021 11:34 Post subject: New Build - 06/16/2021 - r46958
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46958 std (06/16/21) (prev. DD-WRT v3.0-r46949 std (06/13/21))
Kernel: Linux 4.4.272 #3457 SMP Tue Jun 15 04:03:11 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, up 0:24h.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-46958 NEWD-2_K3.x-big-RT-N66U.trx
Firmware: ??? (prev. DD-WRT v3.0-r46949 big (06/13/21))
Kernel: ???
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: ERROR, device does not boot.
See attached log.
Tried manual rebooting, but device is stuck after
"Starting program at 0x80001000".
Router/Version: RT-AC66U/Asus RT-AC66U
File DD-WRT v3.0-r46958 giga (06/16/21)
Kernel: Previous/Reset: 46949/no
Mode/Status: access point, MAC filter/not working
Issues/Errors: looks to be up and running but all Ethernet ports are not working.
Router/Version: E3000/Linksys E3000
File DD-WRT v3.0-r46958 mega (06/16/21)
Kernel: Previous/Reset: 46885/no
Mode/Status: access point, MAC filter/not working
Issues/Errors: does not boot, power led is flashing.
Need to recover both routers tomorrow.
PS: recovered both routers with previous firmware. The RT-AC66U was reset to defaults and needed a complete reconfiguration. The E3000 recovered without a configuration reset. _________________ Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
Last edited by mj666 on Thu Jun 17, 2021 10:00; edited 2 times in total
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46958 std (06/16/21)
Kernel: Linux 4.4.272 #3457 SMP Tue Jun 15 04:03:11 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r46949
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 76.9 °C / WL1 56.0 °C
Load: 0.00, 0.02, 0.00
Uptime 2h
Errors: No, not at this moment.
WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable
DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Wed Jun 16, 2021 18:54 Post subject: New Build - 06/16/2021 - r46958
Router/Version: Netgear WNR3500L v2
File: dd-wrt.v24-46958_NEWD-2_K3.x_giga-WNR3500Lv2
Previous: dd-wrt.v24-46949_NEWD-2_K3.x_giga-WNR3500Lv2
Status: Router won't boot after flash from previously version
Issues/Errors: Totally can't start device after flash. Orange power led only.
It was build 46949 on my device and I want to update to version 46958. After flash via ssh router can't start. I try to restore factory defaults via button on case. Problem is still. Currently device is re-live with usb<->ttl method. I'm stay with version 46949 and device is usable. I have start log captured. Router stay on begin with the newest version.
Quote:
Decompressing...done
CFE for WNR3500Lv2 version: v1.0.9
Build Date: Fri May 6 11:54:17 CST 2011
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
NFLASH Boot partition size = 524288(0x80000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.136
CPU type 0x19749: 480MHz
Tot mem: 131072 KBytes
Device eth0: hwaddr XXX, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checking crc...done.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ........ 4429432 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Thu Jun 17, 2021 5:31 Post subject:
fixed in latest rev. rebuilding now. i hope i can release the fix in several hours _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46958 std (06/16/21) (prev. DD-WRT v3.0-r46949 std (06/13/21))
Kernel: Linux 4.4.272 #3457 SMP Tue Jun 15 04:03:11 +07 2021 armv7l
Mode: Gateway, Wifi, WAN to Fiber
Reset: No
Status: Problems: in "Wireless -> Wireless Security" changed wifi password, clicked the "Apply Settings" button, internet connection is broken even on wired devices. Waited for about 10 minutes still no internet, rebooted router using the power switch. After reboot, internet connection is back, but wifi password is not changed. This issue is existing in the previous version. Something is wrong with the wifi security page. Please fix it. Thanks.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Thu Jun 17, 2021 6:06 Post subject:
sounds more like you have issues with browser plugins. i can verify that this page is full working on a r7000 using chrome and firefox. if you have javascript filters/blockers, nothing will work of course _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Posted: Thu Jun 17, 2021 6:23 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r46958 std (06/16/21) Kernel: Linux 4.4.272 #3457 SMP Tue Jun 15 04:03:11 +07 2021 armv7l Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 06-13-2021-r46949 Status: Working so far, still testing. Temperatures: CPU 66.9 °C / WL0 50.0 °C / WL1 55.3 °C
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
sounds more like you have issues with browser plugins. i can verify that this page is full working on a r7000 using chrome and firefox. if you have javascript filters/blockers, nothing will work of course
Thanks BS for the reply. I have tried to reset the R7000 then manually enter the settings using Microsoft Edge without any plugins as below:
Setup->WAN: DHCP client with VLAN 10 tagging.
Setup->Switch Config: Added VLAN 10 and ticked WAN port tagged VLAN 10.
Setup->Networking->Port setup->WAN port assignment: VLAN10
Wireless: setup AP names
Wireless Security: added passwords
Setup: Enabled NTP client with time zone and NTP server name.
That's all settings I put in. After click the Wireless->Wireless Security->Apply Settings button, the internet connection is broken on all devices(wired and wireless). Still can access the router webgui, but can't ping outside hosts, can't resolve external host names. Same as I reported before. Have to reboot the router to make it work. Can you please look into it further? Thanks.
Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Fri Jun 18, 2021 4:27 Post subject:
Save each config page, and when you're done with your configs, reboot the router. Otherwise, wait several minutes if you're going to shortcut things with "apply". _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net