New Build - 06/01/2021 - r46836

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Tue Jun 01, 2021 10:13    Post subject: New Build - 06/01/2021 - r46836 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46816 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Select ath10k radios now feature on-the-fly firmware type switching between Customized DD-WRT and Vanilla QCA binaries!
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.8 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed to be reworked in future release: 46782

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Tue Jun 01, 2021 11:05    Post subject: Reply with quote
Linksys EA8500 ...main gateway router
DD-WRT v3.0-r46836 std (06/01/21)
Linux 4.9.269 #215 SMP Mon May 31 02:19:07 +07 2021 armv7l
GUI install over r46816

#

Netgear WNDR3700 V4
DD-WRT v3.0-r46836 std (06/01/21)
Linux 3.18.140-d6 #117496 Tue Jun 1 06:47:02 +07 2021 mips
GUI install over r46816

both units are all good
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Tue Jun 01, 2021 12:44    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r46836 std (06/01/21)
Previous/Reset: DD-WRT v3.0-r46816 std (05/30/21) / No
Mode/Status: Gateway / Working Normally / Clock 2000MHz
Issues/Errors: None

Thanks, BS!

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Jun 01, 2021 18:28    Post subject: Reply with quote
Router Model: dir-862L(x2), x86_64(2x qca9984 ,1x qca9882)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154
https://svn.dd-wrt.com/ticket/7222 *
https://svn.dd-wrt.com/ticket/7226
https://svn.dd-wrt.com/ticket/7246
https://svn.dd-wrt.com/ticket/7284
https://svn.dd-wrt.com/ticket/7331
https://svn.dd-wrt.com/ticket/7338

bad commit r45727 ruining ng-mixed, make sure to override it manually..

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2028

PostPosted: Tue Jun 01, 2021 22:02    Post subject: Reply with quote
Netgear R7500v2
DD-WRT v3.0-r46836 std (06/01/21)
Linux 4.9.269 #216 SMP Tue Jun 1 02:34:06 +07 2021 armv7l

CLI upgrade no reset over r46788

Working fine with DD-WRT, wlan0 WDS Sta w/wlan0 VAP & wlan1 AP, SMB,ProFTPD, Entware, Fat32 & ext2
r45727 override
ondemand, up_threshold 30

_________________
Forum Guide Lines (with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips!)
How to get help the right way

Before asking for help - Read the forum guidelines AND Upgrade DD-WRT!
Adblock by eibgrad + Blocklist Collection
Modwort
DD-WRT Novice


Joined: 02 Jun 2021
Posts: 9

PostPosted: Wed Jun 02, 2021 2:16    Post subject: Reply with quote
Archer C7 V5
Firmware: DD-WRT v3.0-r46836 std (06/01/21)
GUI from 44715
Reset: yes, then loaded a 46788 old config
Mode: AP/Gateway, provides DHCP for other routers in bridge/router mode, runs DDNS, USB printer connected, 5 GHz wifi disabled, 2.4 GHz with additional guest virtual interface.

Issues (also present in others I tested: 44715, 46733, 46772, 46788):
- Wifi works for some hours, and randomly turns off/resets for a minute and restarts. LAN ports seem to work fine in the meantime, only wifi connections are dropped.
- A Tplink WA850RE vanilla extender refuses to connect to AP, showing for a second as a client in Status>Wireless, and then disappearing, cycling every 5 seconds. Randomly after some few minutes/hours it will finally connect, and connection remains stable until extender is restarted or wifi breaks (problem seems to happen only for initial handshake). Time for successful connection seems to have improved in this version, but still being around 10-15 minutes to connect. Same extender connects with no problem if connected through the first bridge router (therefore acting as a second level bridge).
- LED lights not working correctly in general, especially LAN port ones, but this seems to be an old reported issue.
Molle
DD-WRT User


Joined: 13 Jan 2015
Posts: 119
Location: Finland

PostPosted: Wed Jun 02, 2021 6:42    Post subject: Reply with quote
Router/Version: Netgear R7800
Previous/Reset: r46788 (CLI update) / No
Status: OK
Issues: None so far

DD-WRT firmware on 5 GHz (WDS AP), Vanilla on 2.4 GHz (AP).


Router/Version: Linksys EA8500
Previous/Reset: r46788 (CLI update) / No
Status: OK
Issues: None so far

DD-WRT firmware on 5 GHz (WDS Station), 2.4 GHz disabled.
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Wed Jun 02, 2021 12:30    Post subject: Reply with quote
24 hours up, no issues, stable. Thanks!
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Wed Jun 02, 2021 17:37    Post subject: Reply with quote
Routers: 2x Netgear R7800
(common services used for both R7800s)

-8xVLANs + 8xBridges
-SSH -Custom Port & Key
-Syslog
-NTP server default (left blank)
-TCP Congestion - bbr
-Cron Jobs
-USB w/32GB USB3 Thumb Drive (ext4 mounted /jffs & /opt)
-Custom Scripts
-Custom Startup,Shutdown,Firewall Scripts
-NAS Settings - All Disabled
-QoS - Disabled
-ttraff Disabled
-SFE Disabled
-Telnet Disabled


Gateway + WireGuard Router R7800
-DHCP WAN
-ISP IPv6 - Prefix Delegation for 5xVLANs via Dnsmasq
-DDNS - Custom Script
-1xWireGuard Client
-Entware DNSCrypt-Proxy V2.0.45 - IPv4/v6 Cisco Filtered Servers
-YAMon3.4.6 w/Entware's ip-full for IPv6
-WiFi Disabled

WiFi + 2xWireGuard Router R7800
-Static WAN
-IPv6 6to4 tunneling through WireGuard oet2
-5xSSIDs-2xAPs+3xVAPs - Firmware=VANILLA, RTS/CTS 784, wlan0 AC/N Mixed VHT80 & wlan1 NG-Mixed HT40
-2xWireGuard Clients
-Entware DNSCrypt-Proxy V2.0.45 - IPv4/v6 Cloudflare DoH Non-Filtered Servers

Router: 2x Netgear R7800 (Gateway + WiFi Routers)
Firmware: DD-WRT v3.0-r46836 std (06/01/21) [From: DD-WRT v3.0-r46681 std (05/16/21)]
Linux Rel: Linux 4.9.269 #217 SMP Tue Jun 1 armv7l [From: Linux 4.9.268 #184 SMP Sun May 16 armv7l]
WiFi Firmware: 10.4-3.15-00018 [From: same]
WireGuard: 1.0.20210219 [From: same]
Reset: NO - CLI Update
Status & Uptime: Working over 16 hours
Issues/Fixes: none/none


Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1407

PostPosted: Thu Jun 03, 2021 1:11    Post subject: Reply with quote
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r46836 std)
Kernel: Linux 3.10.108-d11 #82623 Tue Jun 1 04:41:57 +07 2021 mips
Status: working
Reset: No
Notes on configuration:

    Client

Errors:


    1. 5Ghz wireless light is not on (2.4Ghz light works)



Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r46836 std)
Kernel: Linux 3.10.108-d11 #82621 Tue Jun 1 04:29:52 +07 2021 mips
Status: Working
Reset: No
Notes on configuration:

    DNSMasq
    Virtual wireless with bridging x2
    multiple DHCP server

Errors:

    None
xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 134

PostPosted: Fri Jun 04, 2021 12:40    Post subject: Reply with quote
Router Model / Version: Linksys EA8500
Previous Firmware:DD-WRT v3.0-r46788 std (05/28/21)
Current Firmware:DD-WRT v3.0-r46836 std (06/01/21)
File:: dd-wrt-webupgrade.bin / CLI Flash (easyddup.sh)
Kernel: Linux 4.9.269 #215 SMP Mon May 31 02:19:07 +07 2021 armv7l
Reset: No
Wireless: Wireless Mode - Client, Firmware Type - DD-WRT
Routing: Operating - Gateway
Setup: SFE, NTP, DDNS (inadyn-Entware),
Services: DNSMasq (GUI+ additional options on USB Syslog, SSH, FreeRadius, Telnet, USB, ProFTPD (with users), Samba (with users), CoovaChilli (with local users & radius), WiFiDog,
Administration:Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: up 1 day, 23:32, load average: 0.07, 0.01, 0.00
Temperature: CPU 56.493 °C / wlan0 48 °C / wlan1 50 °C
Status: OK
Issues: None

All good with this build. Thanks once again BS.
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 960
Location: WV, USA

PostPosted: Mon Jun 14, 2021 3:43    Post subject: Reply with quote
I finally got upgraded to this build 3 days ago (from 44719). I did a full reset and updated all my configuration manually. Took hours! I am having issues now with all my IoT devices not staying connected. I reboot and everything eventually shows up, but starts dropping out after a few hours. The devices still show up in Status/LAN, but can not be pinged, until I reboot the router. Logs are not revealing at all. No errors. EA8500 router. Did not have this issue until the upgrade. It sucks too, because I also killed my Mozilla IoT and moved all to Home Assistant, so that makes trouble shooting very difficult. I should have known better. But when a device becomes un-pingable from my main computer, that pretty much points to DD-WRT. I am using the DD-WRT radio firmware on both 2.4 and 5ghz.

EDIT: Also, I cannot connect to the 2.4 side with my Android phone. NG-Mixed. 5ghz connects fine.

_________________
Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate

Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r53562
Features in use: multiple VLANs over single trunk port

Linksys EA8500 WDS Station x2 - DD-WRT r53562

Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port.

OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

Forum member #248
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Mon Jun 14, 2021 4:17    Post subject: Reply with quote
lexridge,
See my post here:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1238057#1238057

My EA8500 had problems on the 2.4 after a while so I switched both radios to 'VANiLLA' firmware.
I haven't had any problems since ...AND r46885 is most likely the best recent build for the EA8500 Razz

You should prolly at least switch the 2.4 radio to 'VANiLLA' Wink
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 960
Location: WV, USA

PostPosted: Mon Jun 14, 2021 14:50    Post subject: Reply with quote
mrjcd wrote:
lexridge,
See my post here:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1238057#1238057

My EA8500 had problems on the 2.4 after a while so I switched both radios to 'VANiLLA' firmware.
I haven't had any problems since ...AND r46885 is most likely the best recent build for the EA8500 Razz

You should prolly at least switch the 2.4 radio to 'VANiLLA' Wink


I read the link you posted. Good info there. I will try r46885 as soon as I get off work. Already switched the radios back to Vanilla. But yea, things were all good for the first few hours, then all hell broke loose lol Hard to troubleshoot since I had also moved all my home automation devices to a new server, just none of their IPs had changed so it was driving me mad trying to troubleshoot it. Thanks for the tips!

EDIT: r46885 does seem to be working much better already. Hope I am not jinxing it! Wink

_________________
Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate

Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r53562
Features in use: multiple VLANs over single trunk port

Linksys EA8500 WDS Station x2 - DD-WRT r53562

Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port.

OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

Forum member #248
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 960
Location: WV, USA

PostPosted: Thu Jun 24, 2021 14:26    Post subject: Reply with quote
While the problem still persists even after updating to R46885, my Android phone and now an XBox360 cannot connect on the 2.4ghz. 5ghz is fine. Both on Vanilla with recommended settings. I am about to go back to 44719. Ugh!
_________________
Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate

Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r53562
Features in use: multiple VLANs over single trunk port

Linksys EA8500 WDS Station x2 - DD-WRT r53562

Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port.

OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

Forum member #248
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum