New Build - 06/13/2021 - r46949 [DELETED]

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5650

PostPosted: Sun Jun 13, 2021 7:20    Post subject: New Build - 06/13/2021 - r46949 [DELETED] Reply with quote
Moderator note: This build was deleted from the download server (by mistake).

[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46885 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.8 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed to be reworked in a future release.

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Monza
DD-WRT User


Joined: 01 Jul 2018
Posts: 436

PostPosted: Sun Jun 13, 2021 14:46    Post subject: Reply with quote
Upgraded WRT1200AC v1's from r46885 to r46949 using Brave 1.10.97 (64-bit) running on Linux Mint 20.1 OS hardwired via Cat6.

Successful update and reboot. No reset, nothing disabled prior to update, uptime approx 2 hrs, wired/wireless connected, vpn up immediately (Expressvpn). I do not use NAS. SFE, QoS and IPv6 are always disabled. OpenVPN client/DNSMasq and radios always enabled. I do not have any Apple devices.

Kernel Version Linux 4.9.272 #2701 SMP Sun Jun 13 04:56:03 +07 2021 armv7l

No issues with a routine update session. Was not timing the update but it did seem to take a bit longer to complete the update (20 - 30 seconds??). Smooth update with nothing else noticed. Running well for me.
Fritzbuf
DD-WRT User


Joined: 22 Feb 2014
Posts: 156
Location: Germany

PostPosted: Sun Jun 13, 2021 16:44    Post subject: WLan1 2.4Ghz is very slow.... Reply with quote
Router: Linksys WRT3200ACM
- only "N 2.4Ghz"
- HT40
- Chanel 12


The 2.4Ghz WLan1 was very slow and also the range was not good. I use 2 Repeater but the Signal range was soooo bad. I order some new antennas and I hope after install the new one, it will getting better.

UPDATE:
after install this new Firmware, the connection starts fast, but after some minutes it slow down again. After restart the Router the Wlan connection shows "connected without internet". My PC has connection to the internet, after some minutes also the wlan was ok.
I hope the 2.4Ghz is getting better with the next releases and you can find the problem Wink
I use a Samsung S10+ for test....as client

This router is so good but the 2.4Ghz is horrible !!!!!!!!

best regards

_________________
Buffalo WZR-HP-AG300H
WENED
DD-WRT Guru


Joined: 30 May 2017
Posts: 582
Location: Rural Manitoba

PostPosted: Tue Jun 15, 2021 14:45    Post subject: Reply with quote
Upgraded all routers r46854 -> r46949 IE11 no reset
Done two days ago. Master 3200 went to sleep on WLAN & WiFi after 40 hours. Last log entry;
Jun 15 00:53:52 45.131.194.3 process_monitor cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Nothing else till reboot this AM. GUI was still accessible so simply did a reboot from Management and all came up OK.

Had similar problem with R46885 and reverted back one build. Did not revert this time as with the reboot all appears to be running correctly still after 4 hours. In both fails it occured on the second day running.

_________________
Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55363
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN

WRT3200acm r55363 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40

WRT1900Ac V1 5Ghz r55363 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)

WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55363
2.4Ghz AP Ch1 HT20 Mixed

WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55363
2.4Ghz AP Ch1 HT20 Mixed

WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use

3200 Master -> LAN -> 1900ACS -> WDS 5Ghz -> 1900 V1
3200 Master -> WDS -> 3200 Slave & 1900V1
Display posts from previous:    Page 1 of 1
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum