Posted: Thu Jun 03, 2021 11:56 Post subject: New Build - 06/03/2021 - r46854
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Linksys EA8500...main router
DD-WRT v3.0-r46854 std (06/03/21)
Linux 4.9.269 #221 SMP Wed Jun 2 21:58:42 +07 2021 armv7l
GUI install over r46836
fine for me ... just like previous build
#
Netgear WNDR3700 V4
DD-WRT v3.0-r46854 std (06/03/21)
Linux 3.18.140-d6 #117617 Thu Jun 3 05:06:41 +07 2021 mips
GUI install over r46836
all is good ... just like previous build
Joined: 16 Nov 2015 Posts: 6435 Location: UK, London, just across the river..
Posted: Thu Jun 03, 2021 18:04 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r46854 std (06/03/21)
Kernel Version Linux 3.18.140-d6 #117589 Thu Jun 3 04:19:12 +07 2021 mips
update: CLI
reset: NO
status: Operational 12h+
errors: just that small GUI glitch at status>lan>active clients where if you have clients with IP like 192.168.100.101, it overlaps the mac address field...solution BS resize ratio and expand the IP section
Apart of that unit is working as it should, thanks BS ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
EA8500 no problems up 'bout a day
using ath10k 'VANILLA' firmware on both radios.
looky ok just a very few the old shit in dmesg:
Code:
[52982.736095] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode
[52982.736140] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode
[52982.743378] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode
[52982.751528] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode
Archer C7 V5
Firmware: DD-WRT v3.0-r46854 std (06/03/21)
Update: GUI from 46836
Reset: No
Mode: AP/Gateway, provides DHCP for other routers in bridge/router mode, runs DDNS, USB printer connected, 5 GHz wifi disabled, 2.4 GHz with additional guest virtual interface.
Issues (also present in others I tested: 44715, 46733, 46772, 46788, 46836):
- Wifi works for some hours, and randomly turns off/resets for a minute and restarts. LAN ports seem to work fine in the meantime, only wifi connections are dropped. SOLVED by setting Key Renewal Interval to 0 in Wireless Security settings.
- A Tplink WA850RE vanilla extender refuses to connect to AP, showing for a second as a client in Status>Wireless, and then disappearing, cycling every 5 seconds. Randomly, after several reboots of both devices, it gets a successful connection and holds fine after that until rebooted.
- LED lights not working correctly in general, especially LAN port ones.
