Joined: 08 May 2018 Posts: 14208 Location: Texas, USA
Posted: Fri May 21, 2021 15:02 Post subject: New Build - 05/21/2021 - r46733
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Posted: Fri May 21, 2021 15:45 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r46733 std (05/21/21) Kernel: Linux 4.4.268 #3139 SMP Fri May 21 05:16:59 +07 2021 armv7l Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 05-20-2021-r46716 Status: Working really well so far, still testing. Temperatures: CPU 59.1 °C / WL0 47.5 °C / WL1 52.8 °C
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: R7000 TEST
File/Kernel: DD-WRT v3.0-r46733 std (05/21/21)
Previous/Reset: DD-WRT v3.0-r46723 std (05/20/21)
Mode/Status: TESTING for Off Site One
Issues/Errors: none but Still TESTING
Fixes: Port Tagging via Switch GUI is FIXED on this Build.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Fri May 21, 2021 16:50 Post subject:
Router Model: Linksys E2000 (converted N320)
Firmware Version: DD-WRT v3.0-r46733 mega (05/21/21)
Kernel Version: Linux 4.4.268 #9178 Fri May 21 14:19:05 +07 2021 mips
Upgraded: from DD-WRT v3.0-r46446 mega (04/24/21)
Reset: Yes
Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (on Keepsolid) up and running, VPN download (speed 5 Mb/s), Wifi 2,4GHz working.
WireGuard client working (speed 23 Mb/s! )
Some simple speed testing (timed file up and downloading)
Without SFE: 40 /40 Mb/s, U/D
With SFE: 170/170 Mb/s U/D
With CTF: 270/330 Mb/s U/D
Joined: 26 Mar 2013 Posts: 1856 Location: Hung Hom, Hong Kong
Posted: Fri May 21, 2021 18:29 Post subject: DD-WRT BS build 46733 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r46733 std (05/21/21)
Kernel: Linux 4.4.268 #3143 Fri May 21 13:14:56 +07 2021 armv7l
Previous: DD-WRT v3.0-r45592 std (01/28/21)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (Not 24/7; Not using IPv6, VAP, VPN; Using NAS & USB; Unbound enabled)
Reset: NO reset during firmware upgrade but cold boot
Quick and dirty report this build:
Enabling CTF seemed to affect DDNS if not Port-Forwarding in NAT. Could not access my website via DDNS. Other than this, everything is working as usual.
BTW, if you wanna try CTF in Basic Setup, better cold boot your router after it rebooted once, or it might continue to reboot endlessly after hitting <Apply Settings>.
edit:
Does this apply to DD-WRT's Cut-Through Forwarding?
NAT Acceleration, specifically the CTF Cut Through Forwarding portion can conflict with a few other common features. You should consider disable NAT acceleration or turn it to off if you experience any of the problems below.
QoS Restrictions
....
Port Forwarding Not Compatible
NAT Acceleration is reported to not be compatible with port forwarding feature. This means that when you have the NAT Acceleration, you will typically unable to host gaming sessions from your home. So you will not be able to host any game servers such as Minecraft, MMO, or First person shooters since players will not be able to connect to it.
IP Traffic Monitoring and Parental Control
...
Issues with Mirroring of Streaming Devices
...
edit 2:
Found an interesting ticket, which could be a solution, from Asus-Merlin firmware:
Router/Version: R7000 TEST
File/Kernel: DD-WRT v3.0-r46733 std (05/21/21)
Previous/Reset: DD-WRT v3.0-r46723 std (05/20/21)
Mode/Status: TESTING for Off Site One
Issues/Errors: none but Still TESTING
Fixes: Port Tagging via Switch GUI is FIXED on this Build.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!
Testing VAPs with this build it's limited 1 VAP per Band. Currently with build r44483 I have 2 VAPs on 5Ghz Band at Off Site One. I made some changes to make this Build work. Still setting up this Test Build on a spare R7000... _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Sat May 22, 2021 6:18 Post subject:
egc wrote:
Router Model: Linksys E2000 (converted N320)
Firmware Version: DD-WRT v3.0-r46733 mega (05/21/21)
Kernel Version: Linux 4.4.268 #9178 Fri May 21 14:19:05 +07 2021 mips
Upgraded: from DD-WRT v3.0-r46446 mega (04/24/21)
Reset: Yes
Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (on Keepsolid) up and running, VPN download (speed 5 Mb/s), Wifi 2,4GHz working.
WireGuard client working (speed 23 Mb/s! )
Some simple speed testing (timed file up and downloading)
Without SFE: 40 /40 Mb/s, U/D
With SFE: 170/170 Mb/s U/D
With CTF: 270/330 Mb/s U/D
Errors: No, Seems like a good build.
Big Thanks to BS!
Encountered something really strange.
First some background, this is as secondary router connected to the family router and just setup as standard gateway.
Now the weird part: after a reboot I could no longer access my router from my Ethernet connected PC (no GUI no Telnet) and had no internet, lights on the router were on and the router seemed working.
I searched for my paper-clip to reset which is on my desk, my desk computer is on the primary router and for a last chance before resetting I tried to login to the E2000 from the WAN (I had remote administration enabled) and I could login without a problem.
What happened:
While the E2000 rebooted the PC attached (Windows 10) had acquired an IP address from the primary router!
After renewing the IP address all was well.
So while rebooting the switch had a direct connection between WAN and LAN.
Maybe I just noticed this and it has been already there maybe an update in Windows makes my PC acquire an IP address very fast?
Encountered something really strange.
First some background, this is as secondary router connected to the family router and just setup as standard gateway.
Now the weird part: after a reboot I could no longer access my router from my Ethernet connected PC (no GUI no Telnet) and had no internet, lights on the router were on and the router seemed working.
I searched for my paper-clip to reset which is on my desk, my desk computer is on the primary router and for a last chance before resetting I tried to login to the E2000 from the WAN (I had remote administration enabled) and I could login without a problem.
What happened:
While the E2000 rebooted the PC attached (Windows 10) had acquired an IP address from the primary router!
After renewing the IP address all was well.
So while rebooting the switch had a direct connection between WAN and LAN.
Maybe I just noticed this and it has been already there maybe an update in Windows makes my PC acquire an IP address very fast?
Anyway if you encounter a non reachable router after reboot check /renew the IP address of your LAN client
Yes, I also encountered this anomaly while updating to this latest DD-WRT r46733 yesterday on both the Asus RT-N66U and TP-Link Archer C7 v2. Although, I didn't investigate the reason, but both routers required a cycling of the power in order for proper UI operation. Thanks for reporting your findings.
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r46733 std (05/21/21)
Reset: Reset to defaults during GUI upgrade
After the reset, I only configured NAS share on 4TB drive (ext4) to test Samba.
Unfortunately, performance issue persists. Samba transfer between 4-7 MB/s using SMBv3 over gigabit ethernet wired connection. This is a show stopper for me, so reverted back to r41986, which gets ~32 MB/s.
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Sat May 22, 2021 15:19 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r46733M Community Build (05/22/21)
Kernel Version: Linux 4.4.268 #1 SMP Sat May 22 10:09:59 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r46690M Community Build (05/18/21)
Reset: No not this time
Status: Up and running for 8 hours, basic setup as Gateway, static leases, OpenVPN client with Policy Based Routing up and running, 2,4GHz and 5Ghz working, OpenVPN server working, WireGuard server working.
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46733 std (05/21/21)
Kernel: Linux 4.4.268 #3139 SMP Fri May 21 05:16:59 +07 2021 armv7l
Mode: unbound,Gateway, Wireless AP. CTF & FA Enabled
NAT and QOS Off and no VPN +wireguard+SAMBA.
Reset: Nope.
Previous: 05-20-2021-r46716
Status: 1.3 days worrking really well so far, still testing.
Temperatures: CPU 79.1 °C / WL1 57.5 °C
Load: 0.04, 0.02, 0.00
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r46733 std (05/21/21)
Kernel: Linux 4.4.268 #3143 Fri May 21 13:14:56 +07 2021 armv7l
Mode: gateway
Previous: r46690
Reset: no
Status: almost working
Router still reboots spontaneously when any combination of CTF and FA is enabled.
With SFE it is works without issues.
