Netgear r7800 VLAN10 802.1q setup

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message
Jocomol
DD-WRT Novice


Joined: 20 Apr 2021
Posts: 8

PostPosted: Wed Apr 21, 2021 14:52    Post subject: Netgear r7800 VLAN10 802.1q setup Reply with quote
I just installed DD-WRT on my Netgear R7800. This is connected to the fiber optic network of my ISP Wingo (subsidiary of Swisscom, Switzerland) at the WAN port via a TP-Link MC220L Media Converter. The media converter seems to be working as all LEDs light up.

However, I don't have a WAN connection and I suspect that I have to reconfigure something because Wingo writes:
- Multicast and IGMP compatible
- Activate VLAN10 802.1q encapsulation

I know a little about network technology, but the knowledge ends again when it comes to VLANs. That's why I might need support.

Thank you and have a nice evening




Link to the “Instructions” (very poorly documented) for using your own router.
https://www.wingo.ch/de/kann-ich-fuer-wingo-internet-meinen-eigenen-router-verwenden
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 9012
Location: Texas, USA

PostPosted: Wed Apr 21, 2021 15:37    Post subject: Reply with quote
Three separate threads about three separate Atheros devices regarding VLANs / VLAN tagging / 802.1q from the list of references sticky at the top of the Atheros forum:

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=313472

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=290196

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=328393

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
Jocomol
DD-WRT Novice


Joined: 20 Apr 2021
Posts: 8

PostPosted: Wed Apr 21, 2021 20:44    Post subject: Reply with quote
Thank you very much, I must have overseen these
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6137
Location: Romerike, Norway

PostPosted: Sat May 15, 2021 12:04    Post subject: Reply with quote
This will tag wan with vlan 10.


swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 vlan 2 set ports "0 5t"
swconfig dev switch0 vlan 2 set vid 10
swconfig dev switch0 set apply
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum