[solved ] DIR-825 B1 B2 Flash 16MB and RAM 128MB upgrades

Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware DIY / Hardware Mods
Author Message
voip2014
DD-WRT Novice


Joined: 20 Feb 2021
Posts: 38

PostPosted: Wed Mar 31, 2021 9:07    Post subject: [solved ] DIR-825 B1 B2 Flash 16MB and RAM 128MB upgrades Reply with quote
Based on current information it appears we can upgrade the flash to 16MB and the RAM to 128MB anyone tried this yet? Would be interested in turning this router into a nice home server for some tasks.

This would require de-soldering and dumping the current firmware and then adding the new chips and adding the correct Uboot would be interested to know if anyone has given it a shot.

Ram datasheet attached looks like standard
200Mhz DDR400
5 : 200MHz @CL3-3-3
4 BANKS X 4Mbit X 16 (164)

Flash datasheet attached
S25FL064A; www.DataSheet4U.com S25FL064A 64 Megabit CMOS 3.0 Volt Flash Memory with 50MHz SPI (Serial Peripher.


I would like to go with hynix ram (2x64MB) and spansion flash ( 1x 16) does anyone have any chip recommendations?





Last edited by voip2014 on Thu May 06, 2021 17:39; edited 1 time in total
Sponsor
voip2014
DD-WRT Novice


Joined: 20 Feb 2021
Posts: 38

PostPosted: Wed Mar 31, 2021 9:43    Post subject: Reply with quote
16MB flash being considered FL128PIF , W25Q128JVFIQ or MX25L12845EWI-10G 16MB SOIC 16pins, I suspect even 128MB SOIC should work.. in theory may need to change Uboot and calibration data to the Netgear WNDR3700 to allow for the higher flash densities, still looking into it for ram lots to choose from. Let me know if anyone has attempted this, also ram presently didnt see any hynix ones except H5DU5162ETR ( not avail presently) but did see this EM6AB160TSE-5G 200MHz 400Mbps/pin TSOPII available which seems to be similar clock as the original chips with the 32x16 = 512Megabits.

Over all upgrade cost is about 10 bucks + time.

Looking to get some feedback before attempting.
voip2014
DD-WRT Novice


Joined: 20 Feb 2021
Posts: 38

PostPosted: Tue Apr 13, 2021 9:57    Post subject: Reply with quote
RAM chips:
Hynix-H5DU5162ETR-E3C and HY5DU121622CTP-D43

Flash Chip trying :
16MB FL128PIF
16MB, MT25QL128

128MB is MT25QL01GB ( no economic source)
there is a winbond one on the main arrow and mouser sites which is soic 16 W25N01GVSFIG but it gets pricy to ship a 3 dollar chip atm, Will look for better sources for the 128MB flash.


In theory 128MB flash + 128MB ram would be fine on the dir-825 B1,b2

Still waiting on chips.
voip2014
DD-WRT Novice


Joined: 20 Feb 2021
Posts: 38

PostPosted: Thu May 06, 2021 18:17    Post subject: Reply with quote
This was successful still trying to figure out how to put ddwrt on it I like some of the client bridge modes on ddwrt but on openwrt it works fine,


https://forum.openwrt.org/t/converting-upgrades-for-tew-673gru-or-dir-825-b1-into-wndr-3800/95718
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum