New Build - 04/24/2021 - r46446

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 9045
Location: Texas, USA

PostPosted: Sat Apr 24, 2021 15:01    Post subject: New Build - 04/24/2021 - r46446 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46442 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Select ath10k radios now feature on-the-fly firmware type switching between Customized DD-WRT and Vanilla QCA binaries!
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.7 • OpenSSL 1.1.1k • Dnsmasq 2.85 Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 428

PostPosted: Sat Apr 24, 2021 15:53    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r46446 std (04/24/21)
Previous/Reset: DD-WRT v3.0-r46442 std (04/23/21) / No
Mode/Status: Gateway / Working Normally / Clock 2000MHz
Issues/Errors: None

No issues.

_________________
Netgear R9000 X10
DD-WRT v3.0-r46979 std (06/21/21)
Gateway, AP, DNSMasq
IPv4 & IPv6 (Prefix Delegation)
CloudFlare, Ignore WAN DNS
QoS Disabled
Vanilla
Static Leases & DHCP
2.4GHz: 10 + 6 (2457 MHz HT40), ACK Timing 3150, WPA2 w/AES
5GHz: 100 + 114 (5500 MHz VHT160), ACK Timing 3160, WPA2 w/AES
Clock 2000MHz
Xfinity 1.2Gbps/42Mbps
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7486
Location: YWG, Canada

PostPosted: Sat Apr 24, 2021 18:05    Post subject: Reply with quote
Router Model: dir-862L(x2), x86_64(2x qca9984 ,1x qca9882)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154
https://svn.dd-wrt.com/ticket/7222 *
https://svn.dd-wrt.com/ticket/7226
https://svn.dd-wrt.com/ticket/7246
https://svn.dd-wrt.com/ticket/7284
https://svn.dd-wrt.com/ticket/7331
https://svn.dd-wrt.com/ticket/7338

bad commit r45727 ruining ng-mixed, make sure to override it manually...

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r46979 std
[QUALCOMM] DIR-862L --------------------------------> r46979 std
[QUALCOMM] DIR-862L --------------------------------> r46979 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r46350 std
[BROADCOM] DIR-860L A1 ----------------------------> r46329 std


If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
ayandon
DD-WRT Novice


Joined: 20 Nov 2019
Posts: 10

PostPosted: Sun Apr 25, 2021 8:35    Post subject: ISSUE! Reply with quote
I am using a TP-Link TL-WDR4300 v1 router.
It is connected with a 16GB Pen-drive.

Since update, whenever I want to access the public shared location, it is asking for username and password! It is happening from my both Win 7 and Win 10 pcs.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 9045
Location: Texas, USA

PostPosted: Sun Apr 25, 2021 10:23    Post subject: Reply with quote
Which is normal. You have to add a username/password for your shares.
_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
ayandon
DD-WRT Novice


Joined: 20 Nov 2019
Posts: 10

PostPosted: Sun Apr 25, 2021 10:45    Post subject: Reply with quote
kernel-panic69 wrote:
Which is normal. You have to add a username/password for your shares.


My Share is set as Public.
In the previous DD-WRT version, I didn't face this issue!!
ayandon
DD-WRT Novice


Joined: 20 Nov 2019
Posts: 10

PostPosted: Sun Apr 25, 2021 11:07    Post subject: Reply with quote
kernel-panic69 wrote:
Which is normal. You have to add a username/password for your shares.


I switched back to v3.0-r45735 and problem solved!
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 4402
Location: UK, London, just across the river..

PostPosted: Sun Apr 25, 2021 11:55    Post subject: Reply with quote
ayandon wrote:
kernel-panic69 wrote:
Which is normal. You have to add a username/password for your shares.


I switched back to v3.0-r45735 and problem solved!


yep 'problem solved!' ...but you left your router unpatched for the last vulnerabilities...strongly advised to use the last firmware version..
as well there is a reason to ask for user/pass for samba shares...see KP69 advise above, its normal on the new firmware builds...


Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r46446 std (04/24/21)
Kernel Version Linux 3.18.140-d6 #113927 Sat Apr 24 08:26:47 +07 2021 mips

Router Model TP-Link TL-WR740N
Firmware Version DD-WRT v3.0-r46446 std (04/24/21)
Kernel Version Linux 3.10.108-d11 #79364 Sat Apr 24 07:49:08 +07 2021 mips

Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r46446 std (04/24/21)
Kernel Version Linux 4.9.267 #150 SMP Sat Apr 24 05:46:20 +07 2021 armv7l


Status: OK
Issues: None so far
update: CLI
reset: NO
status: Operational/Buggy 12h+
errors: Nothing new on 1043v2 and 740v1

On my R7800 I just moved from DDWRT to Vanilla, still the same WiFi drops on various devices, very randomly, mainly on Windows 10 20H2 and on iPhones, but very random...
Wi Fi on 1043v2 behaves rock solid...so, it must be a function that is present on R7800, but not on 1043v2 i need to investigate...both running almost similar WiFi config... will do R7800 reset to see if this helps...

_________________
Atheros
TP-Link WR740Nv1 -----DD-WRT 46974 BS AP,NAT
TP-Link WR740Nv4 -----DD-WRT 44251 BS WAP/Switch
TP-Link WR1043NDv2 ---DD-WRT 46885 BS AP,NAT,AP Isolation,Ad-Block,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 ---DD-WRT 46974 BS AP,NAT,AD/Block,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 ---Gargoyle OS 1.12.0 AP,NAT,QoS,Quotas
Qualcomm/IPQ8065
Netgear R7800 -----DD-WRT 46979 BS AP,NAT,AD-Block,AP&Net Isolation,VLAN's,Firewall,Local DNS,DoT
Broadcom
Netgear R7000 -----DD-WRT 46979 BS AP,Wi-Fi OFF,NAT,AD-Block,Firewall,Local DNS,Forced DNS,VLAN's,DoT,VPN
-----------------------------------------------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Sat May 08, 2021 14:41; edited 4 times in total
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 428

PostPosted: Sun Apr 25, 2021 15:44    Post subject: Reply with quote
Up for 24 hours, no issues or hiccups.
_________________
Netgear R9000 X10
DD-WRT v3.0-r46979 std (06/21/21)
Gateway, AP, DNSMasq
IPv4 & IPv6 (Prefix Delegation)
CloudFlare, Ignore WAN DNS
QoS Disabled
Vanilla
Static Leases & DHCP
2.4GHz: 10 + 6 (2457 MHz HT40), ACK Timing 3150, WPA2 w/AES
5GHz: 100 + 114 (5500 MHz VHT160), ACK Timing 3160, WPA2 w/AES
Clock 2000MHz
Xfinity 1.2Gbps/42Mbps
Rocketboy235
DD-WRT User


Joined: 14 Oct 2016
Posts: 102
Location: United States

PostPosted: Mon Apr 26, 2021 0:31    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Linksys EA8500
File/Kernel: DD-WRT v3.0-r46446 std (04/24/21)
Previous/Reset: DD-WRT v3.0-44719 std (11/03/20) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

Been running for half an hour so far and no issues as of yet...

Going to try out the Vanilla firmware type in the WiFi settings and hope that my previous issues mentioned here:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=325230
are no longer happening.

_________________
DD-WRT Router Arsenal:

Linksys EA8500 - BS 46446 (previously r44719)
TP Link TL-WR1043ND v1.8 - BS 42819 (previously r45955)
Motorola WR850G v3 - BS 21286
Molle
DD-WRT User


Joined: 13 Jan 2015
Posts: 56
Location: Finland

PostPosted: Mon Apr 26, 2021 7:31    Post subject: Reply with quote
Router/Version: Netgear R7800
Previous/Reset: r46329 (CLI update) / No
Status: OK
Issues: None so far

DD-WRT firmware on 5 GHz (WDS AP), Vanilla on 2.4 GHz (AP) with Tatsuya46's fix for NG-Mixed.


Router/Version: Linksys EA8500
Previous/Reset: r46329 (CLI update) / No
Status: OK
Issues: None so far

DD-WRT firmware on 5 GHz (WDS Station), 2.4 GHz disabled.

_________________
Netgear R7800 (AP / WDS AP): DD-WRT 46949 std
Linksys EA8500 (WDS Station): DD-WRT 46949 std
surfkiller20
DD-WRT Novice


Joined: 23 Feb 2012
Posts: 3

PostPosted: Mon Apr 26, 2021 10:57    Post subject: Reply with quote
Router/Version: TP-Link Archer C7 V5 working as Wireless Bridge
Previous/Reset: r46329 / No
Status: OK
Issues: After ~24h of Working some Wireless lags on 5Ghz.
2.4 Ghz configured as AP, 5Ghz wlan1 builds the bridge, wlan1.1 is a VAP, every Wireless Device connects to.

Syslog after 24h:

Quote:

Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.070000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.210000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.350000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.490000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.630000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.770000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.920000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:37:00 DD-WRT kern.info kernel: [85665.060000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:37:00 DD-WRT kern.info kernel: [85665.200000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:45:40 DD-WRT kern.info kernel: [86185.130000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:45:40 DD-WRT kern.info kernel: [86185.310000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:45:52 DD-WRT kern.info kernel: [86197.230000] ath10k_pci 0000:00:00.0: baseband timeout


Earlier Releases causes many disconnects from Main Router aftr a couple of hours.
About 10 disconnect / reconnects in 4 Minutes.
Actually r46446 is the best release for me
xl600
DD-WRT Novice


Joined: 04 Dec 2019
Posts: 25

PostPosted: Mon Apr 26, 2021 12:59    Post subject: Reply with quote
Update method: FF
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r46446 std (04/24/21)
Previous/Reset: DD-WRT v3.0-r46380 / Yes
Mode/Status: Gateway / Working Normally / Clock 1700mhz
Issues/Errors:

Two issues. The first is that ntpclient refuses to operate. I’ve tried leaving the server field blank, tried us.pool.ntp.org, tried an internal ntp server (which I use for everything inside my lan), and even a cron job. None work. I can log in via ssh and issue “ntpclient us.pool.ntp.org” and get a timesync, but it never works automatically. Granted, I’ve only had this router for a week but this has never been an issue with any other router I’ve used with ddwrt (wrt3200acm among others).

The second issue is a weird display in the sys-info screen. When the auto refresh occurs, the memory display gets corrupted. I’ll attach a screenshot.
ayandon
DD-WRT Novice


Joined: 20 Nov 2019
Posts: 10

PostPosted: Mon Apr 26, 2021 13:03    Post subject: Reply with quote
xl600 wrote:
The first is that ntpclient refuses to operate. I’ve tried leaving the server field blank, tried us.pool.ntp.org, tried an internal ntp server (which I use for everything inside my lan), and even a cron job. None work. I can log in via ssh and issue “ntpclient us.pool.ntp.org” and get a timesync, but it never works automatically. Granted, I’ve only had this router for a week but this has never been an issue with any other router I’ve used with ddwrt (wrt3200acm among others).


Use this IP as NTP server and check - 129.6.15.28
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7486
Location: YWG, Canada

PostPosted: Mon Apr 26, 2021 18:35    Post subject: Reply with quote
surfkiller20 wrote:
Router/Version: TP-Link Archer C7 V5 working as Wireless Bridge
Previous/Reset: r46329 / No
Status: OK
Issues: After ~24h of Working some Wireless lags on 5Ghz.
2.4 Ghz configured as AP, 5Ghz wlan1 builds the bridge, wlan1.1 is a VAP, every Wireless Device connects to.

Syslog after 24h:

Quote:

Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.070000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.210000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.350000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.490000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.630000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.770000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:36:59 DD-WRT kern.info kernel: [85664.920000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:37:00 DD-WRT kern.info kernel: [85665.060000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:37:00 DD-WRT kern.info kernel: [85665.200000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:45:40 DD-WRT kern.info kernel: [86185.130000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:45:40 DD-WRT kern.info kernel: [86185.310000] ath10k_pci 0000:00:00.0: baseband timeout
Apr 26 12:45:52 DD-WRT kern.info kernel: [86197.230000] ath10k_pci 0000:00:00.0: baseband timeout


Earlier Releases causes many disconnects from Main Router aftr a couple of hours.
About 10 disconnect / reconnects in 4 Minutes.
Actually r46446 is the best release for me


and vanilla radio firmware is tried?

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r46979 std
[QUALCOMM] DIR-862L --------------------------------> r46979 std
[QUALCOMM] DIR-862L --------------------------------> r46979 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r46350 std
[BROADCOM] DIR-860L A1 ----------------------------> r46329 std


If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum