Joined: 08 May 2018 Posts: 14207 Location: Texas, USA
Posted: Sat Apr 24, 2021 15:01 Post subject: New Build - 04/24/2021 - r46446
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Posted: Sun Apr 25, 2021 8:35 Post subject: ISSUE!
I am using a TP-Link TL-WDR4300 v1 router.
It is connected with a 16GB Pen-drive.
Since update, whenever I want to access the public shared location, it is asking for username and password! It is happening from my both Win 7 and Win 10 pcs.
Joined: 16 Nov 2015 Posts: 6434 Location: UK, London, just across the river..
Posted: Sun Apr 25, 2021 11:55 Post subject:
ayandon wrote:
kernel-panic69 wrote:
Which is normal. You have to add a username/password for your shares.
I switched back to v3.0-r45735 and problem solved!
yep 'problem solved!' ...but you left your router unpatched for the last vulnerabilities...strongly advised to use the last firmware version..
as well there is a reason to ask for user/pass for samba shares...see KP69 advise above, its normal on the new firmware builds...
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r46446 std (04/24/21)
Kernel Version Linux 3.18.140-d6 #113927 Sat Apr 24 08:26:47 +07 2021 mips
Router Model TP-Link TL-WR740N
Firmware Version DD-WRT v3.0-r46446 std (04/24/21)
Kernel Version Linux 3.10.108-d11 #79364 Sat Apr 24 07:49:08 +07 2021 mips
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r46446 std (04/24/21)
Kernel Version Linux 4.9.267 #150 SMP Sat Apr 24 05:46:20 +07 2021 armv7l
Status: OK
Issues: None so far
update: CLI
reset: NO
status: Operational/Buggy 12h+
errors: Nothing new on 1043v2 and 740v1
On my R7800 I just moved from DDWRT to Vanilla, still the same WiFi drops on various devices, very randomly, mainly on Windows 10 20H2 and on iPhones, but very random...
Wi Fi on 1043v2 behaves rock solid...so, it must be a function that is present on R7800, but not on 1043v2 i need to investigate...both running almost similar WiFi config... will do R7800 reset to see if this helps... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Sat May 08, 2021 14:41; edited 4 times in total
Been running for half an hour so far and no issues as of yet...
Going to try out the Vanilla firmware type in the WiFi settings and hope that my previous issues mentioned here:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=325230
are no longer happening. _________________ DD-WRT Router Arsenal:
Router/Version: TP-Link Archer C7 V5 working as Wireless Bridge
Previous/Reset: r46329 / No
Status: OK
Issues: After ~24h of Working some Wireless lags on 5Ghz.
2.4 Ghz configured as AP, 5Ghz wlan1 builds the bridge, wlan1.1 is a VAP, every Wireless Device connects to.
Earlier Releases causes many disconnects from Main Router aftr a couple of hours.
About 10 disconnect / reconnects in 4 Minutes.
Actually r46446 is the best release for me
Two issues. The first is that ntpclient refuses to operate. I’ve tried leaving the server field blank, tried us.pool.ntp.org, tried an internal ntp server (which I use for everything inside my lan), and even a cron job. None work. I can log in via ssh and issue “ntpclient us.pool.ntp.org” and get a timesync, but it never works automatically. Granted, I’ve only had this router for a week but this has never been an issue with any other router I’ve used with ddwrt (wrt3200acm among others).
The second issue is a weird display in the sys-info screen. When the auto refresh occurs, the memory display gets corrupted. I’ll attach a screenshot.
The first is that ntpclient refuses to operate. I’ve tried leaving the server field blank, tried us.pool.ntp.org, tried an internal ntp server (which I use for everything inside my lan), and even a cron job. None work. I can log in via ssh and issue “ntpclient us.pool.ntp.org” and get a timesync, but it never works automatically. Granted, I’ve only had this router for a week but this has never been an issue with any other router I’ve used with ddwrt (wrt3200acm among others).
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Mon Apr 26, 2021 18:35 Post subject:
surfkiller20 wrote:
Router/Version: TP-Link Archer C7 V5 working as Wireless Bridge
Previous/Reset: r46329 / No
Status: OK
Issues: After ~24h of Working some Wireless lags on 5Ghz.
2.4 Ghz configured as AP, 5Ghz wlan1 builds the bridge, wlan1.1 is a VAP, every Wireless Device connects to.
Earlier Releases causes many disconnects from Main Router aftr a couple of hours.
About 10 disconnect / reconnects in 4 Minutes.
Actually r46446 is the best release for me
and vanilla radio firmware is tried? _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers