Posted: Tue Apr 13, 2021 9:10 Post subject: New Build - 04/13/2021 - r46329
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 18 Mar 2014 Posts: 12882 Location: Netherlands
Posted: Tue Apr 13, 2021 11:07 Post subject:
Router Model: Netgear R6400v1
Firmware Version: Kernel Version: Linux 4.4.265 #2 SMP Fri Apr 9 12:39:35 CEST 2021 armv7l
Upgraded from: Linux 4.4.265 #1 SMP Tue Apr 13 10:14:28 CEST 2021 armv7l
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, IPv4, 2.4 GHz and 5 GHz.
WireGuard client tunnel to own WG server for site-to-site connection.
VPN client to Keepsolid.
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46329 std (04/13/21) (prev. DD-WRT v3.0-r46316 std (04/09/21))
Kernel: Linux 4.4.265 #2494 SMP Mon Apr 12 02:49:48 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, 45min up.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-46329_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46329 big (04/13/21) (prev. DD-WRT v3.0-r46316 big (04/09/21))
Kernel: Linux 4.4.265 #8167 Tue Apr 13 12:38:07 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, 39min up.
Highlight:
New dnsmasq Version
Sad News:
RIP old auth fail message
Router/Version: Linksys WRT54GL 1.1
File/Kernel: 46329, dd-wrt.v24_std_special_generic.bin
Firmware: DD-WRT v3.0-r46329 std-special (04/13/21)
Linux 3.18.140-d5 #112815 Tue Apr 13 04:17:55 +07 2021 mips
Previous/Reset: 46177 , no reset
Mode/Status: LAN and AP, router
Issues/Errors: took 20s to get back active
update via web-interface, after boot no problem, works fine
Last edited by Dwarden on Sun Jul 02, 2023 6:09; edited 1 time in total
Router/Version: Asus RT-AC68U rev. C1
File: asus_rt-ac68u-firmware.trx
Kernel: Linux 4.4.265 #2494 SMP Mon Apr 12 02:49:48 +07 2021 armv7l
Mode: Gateway, AP
Reset: No, flashed from CLI
Status: Ok, seems to work fine _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Joined: 30 Jul 2007 Posts: 33 Location: Melbourne, Australia
Posted: Sat Apr 17, 2021 6:02 Post subject:
Router/Version: Asus RT-AC87U
File/Kernel: asus_rt-ac87u-firmware.trx / Linux 4.4.265 #2502 SMP Tue Apr 13 08:21:08 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r45735 std (02/11/21) / No
Mode/Status: AP, Gateway / Good so far (about 1 hour)
Issues/Errors: Couple of errors in syslog, nothing preventing function
Router/Version: Asus RT-AC68U C1
File/Kernel: asus_rt-ac68u-firmware.trx / Linux 4.4.265 #2494 SMP Mon Apr 12 02:49:48 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r44213 std (08/18/20) / No
Mode/Status: AP/VAP, Gateway, VLAN switch-router, PBR / Good so far (about 1 hour)
Issues/Errors: Couple of errors in syslog, nothing preventing function
Router/Version: Asus RT-N16
File/Kernel: dd-wrt.v24-46329_NEWD-2_K3.x-big-RT-N16.trx / Linux 4.4.265 #8167 Tue Apr 13 12:38:07 +07 2021 mips
Previous/Reset: DD-WRT v3.0-r41379 big (10/24/19) / No
Mode/Status: VLAN switch / Good so far (about 1 hour)
Issues/Errors: Could not log in via SSH on first reboot after upgrade (failed to allocate pty), further reboot appeared to resolve the issue - using built in dropbear as the SSH server, SSH keys only for authentication
All routers were upgraded via web-based UI. _________________ Asus RT-AC87U - dd-wrt
Asus RT-AC68U - dd-wrt
Asus RT-N16 - dd-wrt
TP-Link TL-MR3020 - OpenWRT
VAPs / VLANs / PBR / Entware
Router/Version: Linksys WRT54GS v1.1
File/Kernel: dd-wrt.v24_mini_generic.bin r46329 (Apr 13th 2021)
Previous/Reset: r46239 (Apr 1st 2021) / No Reset
Mode/Status: Standard Use (LAN/WiFi)
Issues/Errors: Nothing so far.
I flashed through 'Administration > Firmware Upgrade' like usual.
p.s. it's on my ASUS WL-520gU to. _________________ Primary Router: Linksys WRT54GS v1.1 /w dd-wrt.v24_mini_generic (r46640 May 13th 2021) ; new Panasonic capacitors Feb 11th 2020 | Backup Router: Linksys WRT54GS v6 /w dd-wrt.v24_micro_generic (r46640 May 13th 2021)