Posted: Tue Apr 13, 2021 9:09 Post subject: New Build - 04/13/2021 - r46329
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router Model: TP-Link ARCHER-C5 v1
Kernel Version: Linux 3.18.140-d5
Previous/Reset: 04/09/2021 - r46316 / No
Mode/Status: Gateway /2.4 GHz,5.0 GHz, IPv4, Port Forwarding, NTP TimeSync, Samba, VPN
Issues/Errors: router is resetting itself every 30 seconds , When is connected usb drive 128 GB router restarts. When is unplugged usb drive router works.
Router/Version: TP-Link TL-WR941ND v6/v3
File/Kernel: 46329, tl-wr940ndv3-webflash.bin
Firmware: DD-WRT v3.0-r46329 std (04/13/21)
Linux 3.18.140-d5 #112815 Tue Apr 13 04:17:55 +07 2021 mips
Previous/Reset: 46177 , no reset
Mode/Status: LAN and AP, router
Issues/Errors: took 20s to get back active
update via web-interface, after boot no problem, works fine
Status: Up and running for 24 hours , basic setup as Gateway, static leases, 2,4GHz, 5Ghz (Vanilla Firmware). DDNS working.
OpenVPN Server with site-to-site setup and local DNS working.
WireGuard server working.
Errors: Nothing encountered yet (but not tested USB/NAS)
Router: 2x Netgear R7800 (Gateway + WiFi Routers)
Firmware: DD-WRT v3.0-r46329 std (04/13/21) [From: DD-WRT v3.0-r46177 std (03/26/21)] Linux Rel: Linux 4.9.265 #119 SMP Tue Apr 13 armv7l [From: LLinux 4.9.263 #65 SMP Fri Mar 26 armv7l] WiFi Firmware: 10.4-3.15-00015 [From: 10.4-ddwrt-9984-tW-13-6144M] WireGuard: 1.0.20210219 [From: same] Reset: NO, SSH Update
Status & Uptime: Working over 5 hours
During my use with Build r46177 I ran into WiFi issues after 8 days of use (or the problems became worst with devices unable to connect) with DD-WRT WiFi Firmware and switched to Vanilla WiFi Firmware.
Update: Working over 26 hours
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r47377 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r47117 Std
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r47117 Std
E3000 - Client Bridge - DDWRT r46979 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r47117 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Router Model / Version: Linksys EA8500
Previous Firmware:DD-WRT v3.0-r46316 std (04/09/21)
Current Firmware: DD-WRT v3.0-r46329 std (04/13/21)
Kernel: Linux 4.9.265 #117 SMP Mon Apr 12 00:53:51 +07 2021 armv7l
Mode: Wireless - Client, Operating - Gateway
Setup: SFE, NTP, DDNS (inadyn-Entware), DNSMasq (GUI+ additional options on USB, Syslog, SSH,FreeRadius, Telnet, USB, ProFTPD (with users), Samba (with users), CoovaChilli (with local users & radius), WiFiDog, Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: 0.03, 0.01, 0.00
Temperature: CPU 55.341 °C / wlan0 47 °C / wlan1 48 °C
Issues: There were 3 issues related to setting up WiFiDog Hotspot. Other than that everything is working fine.
With the standard setup of WiFiDog, it's unable to start as the location of the WifiDog Configuration file is not
in the right location. I'm able to start WiFiDog manually from the shell. https://svn.dd-wrt.com/ticket/7395
When configuring the parameters in the GUI, one of the parameters was stored in the wrong lodation of the
WiFiDog configuration file. This caused WiFiDog to not start. https://svn.dd-wrt.com/ticket/7396
Router/Version: Linksys EA8500
Previous/Reset: r46069 (GUI update) / No
I upgraded to r46329 without issue.
My Smart TV, laptop and mobile worked fine.
But within 3 days, when I went to view Youtube on my Samsung Q70T TV, it could not be accessed, nor Prime Video.
These both worked fine on my laptop.
The TV is connected via ethernet, not wifi.
reboot switch to TV
change DNS on TV to 126.96.36.199
I reflashed router back to r46069 and TV internet now works.
Same thing has happened on all releases after r46069 sometimes within a few hours, but always within 3 days.
Can anyone suggest a solution?
EDIT: There is some discussion on the Marvell sub-forum suggesting that post-r46069 builds are causing issues with Apple products. A number of users have reverted to r46069 and have fewer issues. Could my Samsung Smart TV Internet issue be related to this Apple issue? _________________ ------------------------------------
Linksys EA8500 DD-WRT r47461 (Gateway)
Linksys WRT1900ACv1 DD-WRT r47461 (AP)
Netgear/Telstra V7610 (spare AP)
Billion BiPAC 7800NXL (spare AP)
Netgear WNDR3700v4 DD-WRT r47074 (spare Gateway)
Last edited by nickant on Sat Apr 17, 2021 7:09; edited 1 time in total