New Build - 04/09/2021 - r46316

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3155

PostPosted: Fri Apr 09, 2021 8:58    Post subject: New Build - 04/09/2021 - r46316 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46301 (GitHub mirror)

Notes:
OpenVPN 2.5.1: Setup Guides, Server, PBR, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Setup Guides, Client, Server, Advanced, update tips, scripts and more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Select ath10k radios now feature on-the-fly firmware type switching between Customized DD-WRT and Vanilla QCA binaries!
DnsmasqSmartDNS • MiniDLNA 1.3.0 • Privoxy 3.0.31 • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.7 • OpenSSL 1.1.1k
In-kernel Samba (ksmbd 3.3.8+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 4525
Location: UK, London, just across the river..

PostPosted: Fri Apr 09, 2021 9:47    Post subject: Reply with quote
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r46316 std (04/09/21)
Kernel Version Linux 3.18.140-d5 #112461 Fri Apr 9 04:34:51 +07 2021 mips

update: CLI r46301 > r46316
reset: NO
status: Operational
errors: hmm nothing new...
BS we avidly expect the next build....give us the new 46317

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 47117 BS AP,NAT
TP-Link WR1043NDv2 -DD-WRT 47479 BS AP,NAT,AP Isolation,Ad-Block,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 47381 BS AP,NAT,Ad-Block,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -Gargoyle OS 1.12.0 AP,NAT,QoS,Quotas
Qualcomm Atheros/
Netgear R7800 --DD-WRT 47381 BS AP,NAT,AD-Block,AP&Net Isolation,VLAN's,Firewall,Local DNS,DoT,Vanilla
Netgear R9000 --DD-WRT 47479 BS AP,NAT,AD-Block,AP Isolation,Firewall,Local DNS,DoT,2,4Ghz only,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 47381 BS AP,Wi-Fi OFF,NAT,AD-Block,Firewall,Local DNS,Forced DNS,VLAN's,DoT,VPN
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 477

PostPosted: Fri Apr 09, 2021 12:30    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r46316 std (04/09/21)
Previous/Reset: DD-WRT v3.0-r46301 std (04/07/21) / No
Mode/Status: Gateway / Working Normally / Clock 2000MHz
Issues/Errors: None

Thanks, BS!

_________________
Netgear R9000 X10
DD-WRT v3.0-r47479 std (09/23/21)
Gateway, AP, DNSMasq, SFE, Clock 2000MHz
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled
Vanilla, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 3150, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 3160, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7493
Location: YWG, Canada

PostPosted: Fri Apr 09, 2021 18:40    Post subject: Reply with quote
Router Model: dir-862L(x2), x86_64(2x qca9984 ,1x qca9882)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154
https://svn.dd-wrt.com/ticket/7222 *
https://svn.dd-wrt.com/ticket/7226
https://svn.dd-wrt.com/ticket/7246
https://svn.dd-wrt.com/ticket/7284
https://svn.dd-wrt.com/ticket/7331
https://svn.dd-wrt.com/ticket/7338

bad commit r45727 ruining ng-mixed, make sure to override it manually...

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r47183 std
[QUALCOMM] DIR-862L --------------------------------> r47461 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r46350 std
[BROADCOM] DIR-860L A1 ----------------------------> r46329 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% ill never see again..
mitchd123
DD-WRT Novice


Joined: 20 Jun 2010
Posts: 21

PostPosted: Fri Apr 09, 2021 23:05    Post subject: Reply with quote
Router Model Linksys EA8500
Firmware Version DD-WRT v3.0-r46316 std (04/09/21)
Kernel Version Linux 4.9.265 #111 SMP Thu Apr 8 02:04:12 +07 2021 armv7l

update: Browser update: r43720 > r46316
reset: NO
status: Operational
errors: nothing yet (up 11 mins)

Very smooth upgrade, fast upgrade, quick reboot, no issues uncovered. Working well with a large # of static IPs, and a large # of Access Restrictions, throughput 9-12MB/s, about 50 ft from my router, with Intel Wireless-AC 9560 160MHz card 5G, 144mbs.
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7493
Location: YWG, Canada

PostPosted: Fri Apr 09, 2021 23:32    Post subject: Reply with quote
mitchd123 wrote:
throughput 9-12MB/s, about 50 ft from my router, with Intel Wireless-AC 9560 160MHz card 5G, 144mbs.


somethings not right there being a 80/160mhz nic, on 5ghz, but at only 144mbps rate..

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r47183 std
[QUALCOMM] DIR-862L --------------------------------> r47461 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r46350 std
[BROADCOM] DIR-860L A1 ----------------------------> r46329 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% ill never see again..
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1599
Location: WCentral Indiana USA

PostPosted: Fri Apr 09, 2021 23:46    Post subject: Reply with quote
R7500v2
DD-WRT v3.0-r46316 std (04/09/21)
Linux 4.9.265 #112 SMP Fri Apr 9 01:40:07 +07 2021 armv7l
Previous 46166
SCP-CLI upgrade
No reset

wlan0 WDS Sta, wlan0 WDS AP, wlan1 AP, DD-WRT, wlan1 hostapd custom workaround, USB/NAS SMB ProFTPD

Working fine.
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6198
Location: Romerike, Norway

PostPosted: Sat Apr 10, 2021 7:46    Post subject: Reply with quote
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r46316 std (04/09/21)
Kernel Version: Linux 4.9.265 #113 SMP Fri Apr 9 01:48:25 +07 2021 armv7l

Status: Working
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 143
Location: Maharashtra, India

PostPosted: Sat Apr 10, 2021 13:44    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r46316 std (04/09/21)
Kernel: Linux 4.9.265 #113 SMP Fri Apr 9 01:48:25 +07 2021 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using SSH
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r46301 std (04/07/21)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, Samba

Status: Working Fine running Vanilla firmware, Samba Share still needs user, Guest access not working




Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 477

PostPosted: Sat Apr 10, 2021 22:59    Post subject: Reply with quote
Up 36 hours, no issues at all
_________________
Netgear R9000 X10
DD-WRT v3.0-r47479 std (09/23/21)
Gateway, AP, DNSMasq, SFE, Clock 2000MHz
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled
Vanilla, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 3150, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 3160, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
johnnyNobody999
DD-WRT User


Joined: 10 Jan 2014
Posts: 443

PostPosted: Sun Apr 11, 2021 16:36    Post subject: Reply with quote
Router/Version: R9000
File/Kernel: dd-wrt_r9000-webupgrade-r46316.bin
Previous/Reset: dd-wrt_r9000-webupgrade-r46239.bin / no reset
Mode/Status: WDS AP (5GHz), VAP (5 GHz WPA 2/3), AP (2.4 GHz WPA 2/3), wireguard server, Entware dnscrypt-proxy
Issues/Errors: WDS doesn't work per wiki instructions but I have a workaround in place

I'm using 2 GHz clock for first time with no problems so far. Uptime 1 day, 3:18
johnnyNobody999
DD-WRT User


Joined: 10 Jan 2014
Posts: 443

PostPosted: Sun Apr 11, 2021 16:44    Post subject: Reply with quote
Router/Version: R7800 (x4)
File/Kernel: dd-wrt-webupgrade-netgear_r7800-r46316.bin
Previous/Reset: dd-wrt-webupgrade-netgear_r7800-r46239.bin / no reset
Mode/Status: WDS Stations (5 GHz), wireguard clients
Issues/Errors: Found that setting up VAP (5 GHz) on all stations was necessary to get traffic to pass on wired ports. Don't ask me why but it's what I found through experimentation.
madmark
DD-WRT Novice


Joined: 29 Jul 2019
Posts: 27

PostPosted: Mon Apr 12, 2021 11:10    Post subject: Reply with quote
Router Model: TP-Link ARCHER-C5 v1
Kernel Version: Linux 3.18.140-d5
Previous/Reset: r45036 std (12/18/20) / YES
Mode/Status: Gateway /2.4 GHz,5.0 GHz, IPv4, Port Forwarding, NTP TimeSync, Samba, VPN
Issues/Errors: router is resetting itself every 30 seconds , Nothing in syslog. When is connected usb drive 128 GB router restarts. When is unplugged usb drive router works.

I switched to Vanillia firmware on 5g errors in syslog :

an 1 01:00:13 DD-WRT syslog.info syslogd started: BusyBox v1.33.0
Jan 1 01:00:13 DD-WRT user.info : klogd : daemon successfully started
Jan 1 01:00:13 DD-WRT kern.warn kernel: [ 11.070000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 11.080000] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 9e0a5c0f
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 11.090000] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 6211
Jan 1 01:00:13 DD-WRT kern.warn kernel: [ 11.120000] ath10k_pci 0000:01:00.0: otp stream is empty, using board.bin contents
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 11.970000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.010000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 1 is up
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.010000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.020000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.040000] ath10k_pci 0000:01:00.0: Init Max Stations to 128
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.060000] ath10k_pci 0000:01:00.0: P 135 V 16 T 433
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.070000] ath10k_pci 0000:01:00.0: alloc rem: 8440 iram: 30420
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.070000] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x41000061 abi_version 1 mac_addr 14:cc:20:67:bf:35 status 0
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.090000] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
Jan 1 01:00:13 DD-WRT kern.debug kernel: [ 12.200000] ath: EEPROM regdomain sanitized
Jan 1 01:00:13 DD-WRT kern.debug kernel: [ 12.200000] ath: EEPROM regdomain: 0x64
Jan 1 01:00:13 DD-WRT kern.debug kernel: [ 12.200000] ath: EEPROM indicates we should expect a direct regpair map
Jan 1 01:00:13 DD-WRT kern.debug kernel: [ 12.200000] ath: Country alpha2 being used: 00
Jan 1 01:00:13 DD-WRT kern.debug kernel: [ 12.200000] ath: Regpair used: 0x64
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.200000] initialize fq_codel with 262144 bytes memory limit
Jan 1 01:00:13 DD-WRT kern.info kernel: [ 12.200000] ieee80211_txq_setup_flows: set limit to 16777216 bytes
Jan 1 01:00:13 DD-WRT user.info : resetbutton : resetbutton daemon successfully started
Jan 1 01:00:13 DD-WRT user.info : bridge : interface wlan0 successfully deleted from bridge br0
Jan 1 01:00:14 DD-WRT user.info : bridge : bridge br0 successfully added
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.040000] device br0 entered promiscuous mode
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.110000] eth1: link down
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.130000] eth1: link up (1000Mbps/Full duplex)
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.150000] eth1: link down
Jan 1 01:00:14 DD-WRT user.info : bridge : interface eth1 successfully added to bridge br0
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.170000] eth1: link up (1000Mbps/Full duplex)
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.170000] device eth1 entered promiscuous mode
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.190000] br0: port 1(eth1) entered forwarding state
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.200000] br0: port 1(eth1) entered forwarding state
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.200000] device br0 left promiscuous mode
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.210000] device br0 entered promiscuous mode
Jan 1 01:00:14 DD-WRT kern.info kernel: [ 14.230000] device br0 left promiscuous mode
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: EEPROM regdomain: 0x8348
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: EEPROM indicates we should expect a country code
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: doing EEPROM country->regdmn map search
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: country maps to regdmn code: 0x3a
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: Country alpha2 being used: US
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: Regpair used: 0x3a
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: regdomain 0x8348 dynamically updated by user
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: EEPROM regdomain: 0x8348
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: EEPROM indicates we should expect a country code
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: doing EEPROM country->regdmn map search
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: country maps to regdmn code: 0x3a
Jan 1 01:00:14 DD-WRT kern.debug kernel: [ 14.340000] ath: Country alpha2 being used: US

Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2552 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2547 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2542 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2537 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2532 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2527 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2522 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2517 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2512 qual:0 noise:-90 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2507 qual:0 noise:-89 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2502 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2497 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2492 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2487 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2484 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2482 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2477 qual:0 noise:-95 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq:2472 qual:0 noise:-94 eirp: 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2432 default quality 98
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2412 default quality 88
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2452 default quality 87
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2422 default quality 72
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2442 default quality 71
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2427 default quality 48
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2417 default quality 47
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2447 default quality 46
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2437 default quality 46
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2467 default quality 41
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2462 default quality 37
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2457 default quality 29
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: freq: 2472 default quality 0
Jan 1 01:00:26 DD-WRT user.info : autochannel : wlan0: selected: 2432
Jan 1 01:00:27 DD-WRT kern.info kernel: [ 27.430000] device wlan0 entered promiscuous mode
Jan 1 01:00:27 DD-WRT kern.info kernel: [ 27.880000] br0: port 2(wlan0) entered forwarding state
Jan 1 01:00:27 DD-WRT kern.info kernel: [ 27.890000] br0: port 2(wlan0) entered forwarding state
Jan 1 01:00:27 DD-WRT user.info : bridge : interface wlan0 successfully added to bridge br0
Jan 1 01:00:27 DD-WRT kern.info kernel: [ 27.970000] ath10k_pci 0000:01:00.0: user requested fw restart
Jan 1 01:00:28 DD-WRT kern.warn kernel: [ 28.080000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
Jan 1 01:00:28 DD-WRT kern.warn kernel: [ 28.090000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
Jan 1 01:00:28 DD-WRT kern.warn kernel: [ 28.100000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0-vanilla/firmware-6.bin failed with error -2

Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.240000] ath10k_pci 0000:01:00.0: found firmware features ie (3 B)
Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.250000] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.260000] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.270000] ath10k_pci 0000:01:00.0: firmware ver 10.2.4-1.0-00047 api 5 features wmi-10.x,no-p2p,wmi-10.2,raw-mode,mfp,allows-mesh-bcast,peer-fixed-rate crc32 35bd9258
Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.330000] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00000001 board_id 0 chip_id 0 ext_bid_support 0
Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.340000] ath10k_pci 0000:01:00.0: board id does not exist in otp, ignore it (-2144456208)
Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.350000] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,vendor=168c,device=003c,subsystem-vendor=0000,subsystem-device=0000'
Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.360000] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,vendor=168c,device=003c,subsystem-vendor=0000,subsystem-device=0000'
Jan 1 01:00:28 DD-WRT kern.warn kernel: [ 28.370000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
Jan 1 01:00:28 DD-WRT kern.warn kernel: [ 28.390000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board_2.bin failed with error -2

Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.400000] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 9e0a5c0f
Jan 1 01:00:28 DD-WRT kern.info kernel: [ 28.410000] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 7221
Jan 1 01:00:28 DD-WRT kern.warn kernel: [ 28.560000] ath10k_pci 0000:01:00.0: otp stream is empty, using board.bin contents
Jan 1 01:00:29 DD-WRT kern.info kernel: [ 29.240000] br0: port 1(eth1) entered forwarding state
Jan 1 01:00:29 DD-WRT kern.info kernel: [ 29.770000] ath10k_pci 0000:01:00.0: Init Max Stations to 118
Jan 1 01:00:29 DD-WRT kern.info kernel: [ 29.790000] ath10k_pci 0000:01:00.0: P 135 V 16 T 433
Jan 1 01:00:29 DD-WRT kern.info kernel: [ 29.800000] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x4100002f abi_version 1 mac_addr 14:cc:20:67:bf:35 status 0
Jan 1 01:00:29 DD-WRT kern.info kernel: [ 29.810000] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 118 raw 0 hwcrypto 1
Jan 1 01:00:30 DD-WRT kern.info kernel: [ 30.130000] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 7221
Jan 1 01:00:30 DD-WRT kern.warn kernel: [ 30.280000] ath10k_pci 0000:01:00.0: otp stream is empty, using board.bin contents
Jan 1 01:00:31 DD-WRT kern.info kernel: [ 31.330000] ath10k_pci 0000:01:00.0: Init Max Stations to 118
Jan 1 01:00:31 DD-WRT kern.info kernel: [ 31.340000] ath10k_pci 0000:01:00.0: P 135 V 16 T 433
Jan 1 01:00:31 DD-WRT kern.info kernel: [ 31.350000] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x4100002f abi_version 1 mac_addr 14:cc:20:67:bf:35 status 0
Jan 1 01:00:31 DD-WRT kern.warn kernel: [ 31.360000] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
Jan 1 01:00:31 DD-WRT kern.warn kernel: [ 31.390000] ath10k_pci 0000:01:00.0: failed to set vdev 0 tx encap mode: -122
Jan 1 01:00:31 DD-WRT kern.info kernel: [ 31.390000] ath10k_pci 0000:01:00.0: Mac CLK 88
Jan 1 01:00:36 DD-WRT kern.notice kernel: [ 36.890000] random: nonblocking pool is initialized
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5825 qual:100 noise:-106 eirp: 30
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5805 qual:100 noise:-106 eirp: 30
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5785 qual:98 noise:-104 eirp: 30
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5765 qual:97 noise:-103 eirp: 30
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5745 qual:97 noise:-103 eirp: 30
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5640 qual:92 noise:-105 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5720 qual:91 noise:-104 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5700 qual:91 noise:-104 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5680 qual:91 noise:-104 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5660 qual:91 noise:-104 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5580 qual:91 noise:-104 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5560 qual:91 noise:-104 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5540 qual:91 noise:-104 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5500 qual:91 noise:-104 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5620 qual:90 noise:-103 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5600 qual:90 noise:-103 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5520 qual:90 noise:-103 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5300 qual:90 noise:-103 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5260 qual:90 noise:-103 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5240 qual:90 noise:-103 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5220 qual:90 noise:-103 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5320 qual:89 noise:-102 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5280 qual:89 noise:-102 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5200 qual:89 noise:-102 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5180 qual:89 noise:-103 eirp: 23
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5885 qual:0 noise:-104 eirp: 0
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5880 qual:0 noise:-104 eirp: 0
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5875 qual:0 noise:-106 eirp: 0
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5870 qual:0 noise:-105 eirp: 0
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5865 qual:0 noise:-104 eirp: 0
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq:5845 qual:0 noise:-106 eirp: 0
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5825 default quality 100
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5805 default quality 100
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5785 default quality 98
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5765 default quality 97
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5745 default quality 97
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5640 default quality 92
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5720 default quality 91
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5700 default quality 91
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5680 default quality 91
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5660 default quality 91
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5580 default quality 91
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5560 default quality 91
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5540 default quality 91
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5500 default quality 91
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5620 default quality 90
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5600 default quality 90
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5520 default quality 90
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5300 default quality 90
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5260 default quality 90
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5240 default quality 90
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5220 default quality 90
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5320 default quality 89
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5280 default quality 89
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5200 default quality 89
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: freq: 5180 default quality 89
Jan 1 01:00:37 DD-WRT user.info : autochannel : wlan1: selected: 5805
Jan 1 01:00:37 DD-WRT kern.info kernel: [ 37.890000] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 7221
Jan 1 01:00:38 DD-WRT kern.warn kernel: [ 38.040000] ath10k_pci 0000:01:00.0: otp stream is empty, using board.bin contents
Jan 1 01:00:39 DD-WRT kern.info kernel: [ 39.090000] ath10k_pci 0000:01:00.0: Init Max Stations to 118
Jan 1 01:00:39 DD-WRT kern.info kernel: [ 39.100000] ath10k_pci 0000:01:00.0: P 135 V 16 T 433
Jan 1 01:00:39 DD-WRT kern.info kernel: [ 39.110000] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x4100002f abi_version 1 mac_addr 14:cc:20:67:bf:35 status 0
Jan 1 01:00:39 DD-WRT kern.warn kernel: [ 39.130000] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
Jan 1 01:00:39 DD-WRT kern.warn kernel: [ 39.150000] ath10k_pci 0000:01:00.0: failed to set vdev 0 tx encap mode: -122


Jan 1 01:00:39 DD-WRT kern.info kernel: [ 39.160000] device wlan1 entered promiscuous mode
Jan 1 01:00:39 DD-WRT kern.info kernel: [ 39.290000] br0: port 3(wlan1) entered forwarding state
Jan 1 01:00:39 DD-WRT kern.info kernel: [ 39.290000] br0: port 3(wlan1) entered forwarding state
Jan 1 01:00:39 DD-WRT user.info : bridge : interface wlan1 successfully added to bridge br0
Jan 1 01:00:40 DD-WRT kern.info kernel: [ 39.990000] device eth0 entered promiscuous mode

Jan 1 01:00:41 DD-WRT kern.info kernel: [ 41.660000] gre: GRE over IPv4 demultiplexor driver
Jan 1 01:00:41 DD-WRT user.info : upnp : daemon successfully started
Jan 1 01:00:41 DD-WRT user.info : wland : daemon successfully started
Jan 1 01:00:42 DD-WRT kern.warn kernel: [ 42.340000] pptp: Unknown symbol pppox_ioctl (err 0)
Jan 1 01:00:42 DD-WRT kern.warn kernel: [ 42.350000] pptp: Unknown symbol ppp_register_channel (err 0)
Jan 1 01:00:42 DD-WRT kern.warn kernel: [ 42.350000] pptp: Unknown symbol ppp_input (err 0)
Jan 1 01:00:42 DD-WRT kern.warn kernel: [ 42.360000] pptp: Unknown symbol unregister_pppox_proto (err 0)
Jan 1 01:00:42 DD-WRT kern.warn kernel: [ 42.360000] pptp: Unknown symbol register_pppox_proto (err 0)
Jan 1 01:00:42 DD-WRT kern.warn kernel: [ 42.370000] pptp: Unknown symbol pppox_unbind_sock (err 0)
Jan 1 01:00:42 DD-WRT kern.info kernel: [ 42.920000] br0: port 2(wlan0) entered forwarding state
Jan 1 01:00:43 DD-WRT user.info : proftpd : server successfully started
Jan 1 01:00:43 DD-WRT kern.info kernel: [ 43.810000] PPP generic driver version 2.4.2
Jan 1 01:00:43 DD-WRT kern.info kernel: [ 43.960000] PPP BSD Compression module registered
Jan 1 01:00:44 DD-WRT kern.info kernel: [ 44.270000] PPP Deflate Compression module registered
Jan 1 01:00:44 DD-WRT daemon.info httpd[978]: httpd : httpd server started at port 80
Jan 1 01:00:44 DD-WRT user.info : minidlna : DLNA Media Server successfully started
Jan 1 01:00:44 DD-WRT user.info : httpd : http daemon successfully started
Jan 1 01:00:44 DD-WRT kern.info kernel: [ 44.930000] PPP MPPE Compression module registered
Jan 1 01:00:44 DD-WRT kern.info kernel: [ 44.950000] NET: Registered protocol family 24
Jan 1 01:00:45 DD-WRT daemon.info pptpd[1026]: MGR: Maximum of 64 connections reduced to 5, not enough IP addresses given
Jan 1 01:00:45 DD-WRT user.info : pptpd : daemon successfully started
Jan 1 01:00:45 DD-WRT daemon.debug pptpd[1033]: CTRL: BCrelay incoming interface is br0
Jan 1 01:00:45 DD-WRT daemon.info pptpd[1033]: MGR: Manager process started
Jan 1 01:00:45 DD-WRT daemon.info pptpd[1033]: MGR: Maximum of 5 connections available
Jan 1 01:00:45 DD-WRT daemon.debug pptpd[1034]: CTRL (BCrelay Launcher): Launching BCrelay with pid 0
Jan 1 01:00:45 DD-WRT daemon.debug pptpd[1034]: MGR: BCrelay incoming interface is br0
Jan 1 01:00:45 DD-WRT daemon.debug pptpd[1034]: MGR: BCrelay outgoing interface is regexp ppp[0-9].*
Jan 1 01:00:45 DD-WRT daemon.info bcrelay[1034]: Running as child
Jan 1 01:00:47 DD-WRT kern.warn kernel: [ 47.410000] ipt_TRIGGER: module license 'unspecified' taints kernel.
Jan 1 01:00:47 DD-WRT kern.warn kernel: [ 47.410000] Disabling lock debugging due to kernel taint

Jan 1 01:00:48 DD-WRT kern.info kernel: [ 48.140000] Linux kernel CIFS/SMB SERVER 3.3.8 by Namjae Jeon
Jan 1 01:00:48 DD-WRT user.info : smbd : samba started
Jan 1 01:00:48 DD-WRT local5.err ksmbd: [ksmbd-manager/1108]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Jan 1 01:00:48 DD-WRT user.info wsdd2[1105]: starting.
Jan 1 01:00:48 DD-WRT user.err wsdd2[1105]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Jan 1 01:00:48 DD-WRT local5.info ksmbd: [ksmbd-worker/1109]: INFO: User already exists nobody

Jan 1 01:00:48 DD-WRT kern.alert kernel: [ 48.510000] fast-classifier (PBR safe v2.1.6b): starting up
Jan 1 01:00:48 DD-WRT kern.alert kernel: [ 48.510000] fast-classifier: registered
Jan 1 01:00:48 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Jan 1 01:00:48 DD-WRT kern.info kernel: [ 48.740000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:49 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Jan 1 01:00:49 DD-WRT kern.info kernel: [ 49.470000] eth0: link down
Jan 1 01:00:49 DD-WRT kern.info kernel: [ 49.480000] device eth0 left promiscuous mode
Jan 1 01:00:49 DD-WRT user.info : ttraff : traffic counter daemon successfully started
Jan 1 01:00:49 DD-WRT user.info : httpd : daemon successfully stopped
Jan 1 01:00:49 DD-WRT daemon.info httpd[1021]: httpd : httpd server shutdown
Jan 1 01:00:49 DD-WRT daemon.info httpd[1288]: httpd : httpd server started at port 80
Jan 1 01:00:49 DD-WRT user.info : httpd : http daemon successfully started
Jan 1 01:00:49 DD-WRT user.info : resetbutton : daemon successfully stopped
Jan 1 01:00:49 DD-WRT user.info : resetbutton : resetbutton daemon successfully started

Jan 1 01:00:52 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Jan 1 01:00:53 DD-WRT user.err wsdd2[1105]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Jan 1 01:00:53 DD-WRT user.err wsdd2[1105]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable

Jan 1 01:00:53 DD-WRT user.info : upnp : daemon successfully stopped
Jan 1 01:00:53 DD-WRT user.info : upnp : daemon successfully started
Jan 1 01:00:53 DD-WRT user.info : wland : daemon successfully stopped
Jan 1 01:00:53 DD-WRT user.info : wland : daemon successfully started
Jan 1 01:00:53 DD-WRT user.info : wan : WAN is up. IP: 194.110.5.116
Jan 1 01:00:53 DD-WRT user.info : dnsmasq : daemon successfully stopped
Jan 1 01:00:53 DD-WRT user.info : dnsmasq : daemon successfully started
Jan 1 01:00:53 DD-WRT kern.alert kernel: [ 53.850000] fast-classifier: shutting down
Jan 1 01:00:53 DD-WRT user.info : sfe : shortcut forwarding engine successfully stopped
Jan 1 01:00:54 DD-WRT kern.info kernel: [ 54.320000] br0: port 3(wlan1) entered forwarding state
Jan 1 01:00:54 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Jan 1 01:00:54 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 01:00:54 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Jan 1 01:00:54 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Jan 1 01:00:54 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Jan 1 01:00:54 DD-WRT kern.alert kernel: [ 54.890000] fast-classifier (PBR safe v2.1.6b): starting up
Jan 1 01:00:54 DD-WRT kern.alert kernel: [ 54.900000] fast-classifier: registered
Jan 1 01:00:54 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Jan 1 01:00:55 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Jan 1 01:00:55 DD-WRT user.info : process_monitor : successfully started
Jan 1 01:00:55 DD-WRT daemon.debug ntpclient[1849]: Connecting to 2.pool.ntp.org [144.76.76.107] ...
Apr 12 12:45:27 DD-WRT daemon.info ntpclient[1849]: Time set from 2.pool.ntp.org [144.76.76.107].
Apr 12 12:45:27 DD-WRT daemon.info process_monitor[1847]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Apr 12 12:45:27 DD-WRT kern.alert kernel: [ 55.980000] fast-classifier: shutting down
Apr 12 12:45:27 DD-WRT user.info : sfe : shortcut forwarding engine successfully stopped
Apr 12 12:45:27 DD-WRT kern.alert kernel: [ 56.090000] fast-classifier (PBR safe v2.1.6b): starting up
Apr 12 12:45:27 DD-WRT kern.alert kernel: [ 56.100000] fast-classifier: registered
Apr 12 12:45:27 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Apr 12 12:45:28 DD-WRT kern.alert kernel: [ 56.850000] fast-classifier: shutting down
Apr 12 12:45:28 DD-WRT user.info : sfe : shortcut forwarding engine successfully stopped
Apr 12 12:45:28 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Apr 12 12:45:29 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Apr 12 12:45:29 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Apr 12 12:45:29 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Apr 12 12:45:29 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Apr 12 12:45:29 DD-WRT kern.alert kernel: [ 57.820000] fast-classifier (PBR safe v2.1.6b): starting up
Apr 12 12:45:29 DD-WRT kern.alert kernel: [ 57.820000] fast-classifier: registered
Apr 12 12:45:29 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Apr 12 12:45:30 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Apr 12 12:45:30 DD-WRT daemon.debug process_monitor[1847]: Restarting cron (time sync change)
Apr 12 12:45:30 DD-WRT user.info : cron : daemon successfully stopped
Apr 12 12:45:30 DD-WRT user.info : cron : daemon successfully started
Apr 12 12:45:30 DD-WRT cron.info cron[2280]: (CRON) STARTUP (fork ok)
Apr 12 12:45:30 DD-WRT user.info : process_monitor : daemon successfully stopped
Apr 12 12:45:30 DD-WRT daemon.info process_monitor[1847]: process_monitor : cleanup timers
Apr 12 12:45:30 DD-WRT user.info : process_monitor : successfully started
Apr 12 12:45:30 DD-WRT daemon.debug process_monitor[2285]: We need to re-update after 3600 seconds
Rocketboy235
DD-WRT User


Joined: 14 Oct 2016
Posts: 108
Location: United States

PostPosted: Mon Apr 12, 2021 16:42    Post subject: Reply with quote
tatsuya46 wrote:
mitchd123 wrote:
throughput 9-12MB/s, about 50 ft from my router, with Intel Wireless-AC 9560 160MHz card 5G, 144mbs.


somethings not right there being a 80/160mhz nic, on 5ghz, but at only 144mbps rate..


Yeah, that doesn't make sense to me. When mitchd123 said 50 ft from router, is that line of sight?

I can get up to 40-50 Mb/s (or about 400 Mbps actual bandwidth) transfer speeds (only on good days though) with my USB Realtek 8812AU wifi adapter (connection rate is ~780 Mbps).

I will try this build out with my EA8500 in a bit and see how that goes.

Edit: I realize maybe mitchd123 could be using 2.4 ghz network and using the default channel bandwidth of 20 mhz or something.

_________________
DD-WRT Router Arsenal:

Linksys EA8500 - BS 47256 (previously r46446)
TP Link TL-WR1043ND v1.8 - BS 42819 (previously r45955)
Motorola WR850G v3 - BS 21286
jwieland
DD-WRT Novice


Joined: 31 May 2018
Posts: 42

PostPosted: Mon Apr 12, 2021 21:53    Post subject: Reply with quote
Router/Version: Netgear R7800
File/Kernel: r46316 std
Previous/Reset: r46301 std/No reset
Mode/Status: Operational, QOS
Issues/Errors: None known

_________________
Netgear R7800 - DD-WRT v3.0-r47182 VANILLA/VANILLA
Linksys WRT1200ACv2 - DD-WRT v3.0-r44048
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum