Posted: Sat Apr 03, 2021 13:38 Post subject: New Build - 04/03/2021 - r46259
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46259 std (04/03/21) (prev. DD-WRT v3.0-r46239 std (04/01/21))
Kernel: Linux 4.4.264 #2420 SMP Fri Apr 2 15:43:38 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: 11h:58 up, ok. No read lines / trace in first boot syslog after flash.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-46259_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46259 big (04/03/21) (prev. DD-WRT v3.0-r46239 big (04/01/21))
Kernel: Linux 4.4.264 #7951 Sat Apr 3 13:11:44 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: 11h:58 up, ok.
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r46259 std (04/03/21)
Kernel Version: Linux 4.4.264 #2428 SMP Sat Apr 3 09:09:13 +07 2021 armv7l
Previous Version: DD-WRT v3.0- r46239 std (04/01/21)
Drivers: Experimental
Services: samba, dlna server, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issue(s): cannot write to the share folder via windows explorer still
Reset: no
Reboot: yes
Uptime: 13:17
Load Average: 0.22, 0.30, 0.27
Temperatures: CPU 48.6 °C
Errors: as reported in the syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:21 DD-WRT local5.err ksmbd: [ksmbd-manager/1235]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:21 DD-WRT user.err wsdd2[1231]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Apr 4 21:09:32 DD-WRT user.err wsdd2[1231]: Terminated received.
Apr 4 21:09:32 DD-WRT local5.err ksmbd: [ksmbd-manager/1235]: ERROR: WARNING: child process exited abnormally: 1236
Apr 4 21:09:32 DD-WRT local5.err ksmbd: [ksmbd-manager/1235]: ERROR: can't execute kill 1236: No such process
Apr 4 21:09:36 DD-WRT local5.err ksmbd: [ksmbd-manager/3091]: ERROR: Failed to create lock file: File exists
Apr 5 10:23:24 DD-WRT daemon.err httpd[1420]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Warnings: as reported in the syslog below
Apr 4 21:09:35 DD-WRT kern.warn kernel: EXT4-fs (sda6): Ignoring removed nobh option
Dec 31 20:00:10 DD-WRT kern.warn kernel: pci 0002:01:00.0: can't set Max Payload Size to 512; if necessary, use "pci=pcie_bus_safe" and report a bug
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCI: Fixing up bus 1 domain 2
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCIE: Doing PLX switch Init...Test Read = fb410003
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCIE: Doing PLX switch Init...GPIO Read = 00000000
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCIE 0002:02:0008: PLX DownPort mem_base 0x43000000, mem_limit 0x44ffffff
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCIE 0002:02:0008: PLX DownPort Link speed is GEN2
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCIE 0002:02:0008: PLX DownPort Link status 0x6012
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCI: Fixing up bus 2 domain 2
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCI: Fixing up bus 3 domain 2
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCI: Fixing up bus 4 domain 2
Dec 31 20:00:10 DD-WRT kern.warn kernel: Boot partition size = 524288(0x80000)
Dec 31 20:00:10 DD-WRT kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x2400000, 0x20000
Dec 31 20:00:10 DD-WRT kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Dec 31 20:00:10 DD-WRT kern.warn kernel: nf_nat_rtsp v0.7 loading
Dec 31 20:00:10 DD-WRT kern.warn kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Dec 31 20:00:10 DD-WRT kern.warn kernel: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Dec 31 20:00:10 DD-WRT kern.warn kernel: Available 7 bytes at (off,len):
Dec 31 20:00:10 DD-WRT kern.warn kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Dec 31 20:00:10 DD-WRT kern.warn kernel: Options: NO_SUBPAGE_WRITE,
Dec 31 20:00:10 DD-WRT kern.warn kernel: et: module license 'Proprietary' taints kernel.
Dec 31 20:00:10 DD-WRT kern.warn kernel: Disabling lock debugging due to kernel taint
Dec 31 20:00:10 DD-WRT kern.warn kernel: et_module_init: passivemode set to 0x0
Dec 31 20:00:10 DD-WRT kern.warn kernel: et_module_init: txworkq set to 0x1
Dec 31 20:00:10 DD-WRT kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Dec 31 20:00:10 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Dec 31 20:00:10 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Dec 31 20:00:10 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Dec 31 20:00:10 DD-WRT kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
Dec 31 20:00:10 DD-WRT kern.warn kernel: brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
Dec 31 20:00:10 DD-WRT kern.warn kernel: PCI: Enabling device 0002:03:00.0 (0140 -> 0142)
Dec 31 20:00:10 DD-WRT kern.warn kernel: eth0: mixed HW and IP checksum settings.
Dec 31 20:00:19 DD-WRT daemon.warn dnsmasq[1095]: warning: ignoring resolv-file flag because no-resolv is set
Issues:
There is still the appearance and growth of the .meta folder with the file name similar to the one I saved in its folder with that name, i.e. if the file I saved name bob, I placed it in a folder named bob. The .meta folder will appear in my bob’s folder and grows with a file inside name bob also. The program used to read the file I saved named bob cannot read the file name bob in the .meta folder. Currently the file I saved is 1.32 Gb and the .meta folder and file is 26.9 GB. Prior to ntfs3, the .meta folder and file grew to around 170 bytes
I am using minidlna service and video files in the usb
You cannot write, but you can delete, data across the network with windows explorer directly to the share folder on the external drive. You must directly attach the external drive to a computer to write to it.
Prior to ntfs3, these issues did not exist. I also discovered that on reverting to ntfs2, in older builds like r43845, you cannot write to the usb from windows explorer to the share folder on the router any more. With ntfs3, it appears as though the proverbial wheel is being reinvented.
I am beginning to sound like John the Baptist: A voice in the wilderness.
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Tue Apr 06, 2021 15:19 Post subject:
Abboo wrote:
Prior to ntfs3, these issues did not exist. I also discovered that on reverting to ntfs2, in older builds like r43845, you cannot write to the usb from windows explorer to the share folder on the router any more. With ntfs3, it appears as though the proverbial wheel is being reinvented.
If you had an extra USB drive, and had some time and mood, try ext4!