Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Sat Feb 13, 2021 22:59 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r45735 std (02/11/21)
Kernel Version Linux 3.18.140-d5 #106472 Thu Feb 11 06:39:40 +06 2021 mips
Router/Version: R7800
File/Kernel: dd-wrt-webupgrade-netgear_r7800-r45735.bin
Previous/Reset: dd-wrt-webupgrade-netgear_r7800-r44772.bin / no reset
Mode/Status: WDS AP with 4 stations / Working
Issues/Errors: wireguard rate dropped from 320 Mb to 160 Mb - reboot did not fix the problem
uptime 3:06
Feb 13 11:03:27 r7800master user.err wsdd2[2325]: error: llmnr-tcp-v6: open_ep: SO_BINDTODEVICE
Feb 13 11:03:28 r7800master daemon.info mstpd[493]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 19
Feb 13 11:03:28 r7800master user.err wsdd2[2285]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
After 5 hours of uptime, two station routers dropped down to VHT40 from VHT80.
Router/Version: R7800
File/Kernel: dd-wrt-webupgrade-netgear_r7800-r45735.bin
Previous/Reset: dd-wrt-webupgrade-netgear_r7800-r44772.bin / no reset
Mode/Status: WDS AP with 4 stations / Working
Issues/Errors: wireguard rate dropped from 320 Mb to 160 Mb - reboot did not fix the problem
uptime 3:06
Feb 13 11:03:27 r7800master user.err wsdd2[2325]: error: llmnr-tcp-v6: open_ep: SO_BINDTODEVICE
Feb 13 11:03:28 r7800master daemon.info mstpd[493]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 19
Feb 13 11:03:28 r7800master user.err wsdd2[2285]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
After 5 hours of uptime, two station routers dropped down to VHT40 from VHT80.
update: webupgrade r45677 > r45735
reset: YES
status: Operational 12h+
errors: USB 3TB storage won't appear on windows or any other device, PYLOAD won't work
Router Model AsRock G10
Firmware Version DD-WRT v3.0-r45735 std (02/11/21)
Kernel Version Linux 4.9.255 #1123.
Router/Version: TP-Link WR740N v4 File/Kernel: DD-WRT v3.0-r45735 std (02/11/21) / Linux 3.10 Previous/Reset: r45592 / Yes Mode/Status: 2.4GHz AP NG-Mixed, WAN DHCP, DHCP Server Issues/Errors: See below
1. This build increased the frequency of reboots when the LAN clients are off and all Wireless clients are IDLE. On the 45592 build the restart only happens when I leave for work and some devices are DEAUTH. There is nothing in the logs since it is a 4MB device.
Router/Version: R7800
File/Kernel: dd-wrt-webupgrade-netgear_r7800-r45735.bin
Previous/Reset: dd-wrt-webupgrade-netgear_r7800-r44772.bin / no reset
Mode/Status: WDS AP with 4 stations / Working
Issues/Errors: wireguard rate dropped from 320 Mb to 160 Mb - reboot did not fix the problem
uptime 3:06
Feb 13 11:03:27 r7800master user.err wsdd2[2325]: error: llmnr-tcp-v6: open_ep: SO_BINDTODEVICE
Feb 13 11:03:28 r7800master daemon.info mstpd[493]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 19
Feb 13 11:03:28 r7800master user.err wsdd2[2285]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
After 5 hours of uptime, two station routers dropped down to VHT40 from VHT80.
Every hour 2 stations drop off and come back up.
Additional info from syslog of a WDS station when the wifi restarted (router did not reboot) - only one station restarted in this time frame:
Feb 16 12:10:25 r7800office daemon.info mstpd[493]: set_if_up: Port wlan0 : down
Feb 16 12:10:25 r7800office daemon.info mstpd[493]: MSTP_OUT_set_state: br0:wlan0:0 entering blocking state
Feb 16 12:10:25 r7800office daemon.info mstpd[493]: error, rtnl_talk: RTNETLINK answers
Feb 16 12:10:25 r7800office daemon.info mstpd[493]: error, MSTP_OUT_set_state: br0:wlan0 Couldn't set kernel bridge state blocking
Feb 16 12:10:25 r7800office daemon.info mstpd[493]: MSTP_OUT_set_ageing_time: br0:wlan0 Setting new ageing time to 15
Feb 16 12:10:25 r7800office daemon.info mstpd[493]: set_if_up: Port wlan0 : down
Feb 16 12:10:27 r7800office daemon.info mstpd[493]: set_if_up: Port wlan0 : down
Feb 16 12:10:27 r7800office daemon.info mstpd[493]: set_if_up: Port wlan0 : up
Feb 16 12:10:27 r7800office daemon.info mstpd[493]: error, ethtool_get_speed_duplex: Cannot get speed/duplex for wlan0: Not supported
Feb 16 12:10:27 r7800office daemon.info mstpd[493]: set_if_up: Port wlan0 : up
Feb 16 12:10:27 r7800office daemon.info mstpd[493]: error, ethtool_get_speed_duplex: Cannot get speed/duplex for wlan0: Not supported
Feb 16 12:10:39 r7800office daemon.info mstpd[493]: MSTP_OUT_set_ageing_time: br0:wlan0 Setting new ageing time to 300
Feb 16 12:10:46 r7800office daemon.info mstpd[493]: MSTP_OUT_set_state: br0:wlan0:0 entering learning state
Feb 16 12:10:46 r7800office daemon.info mstpd[493]: set_if_up: Port wlan0 : up
Feb 16 12:10:46 r7800office daemon.info mstpd[493]: error, ethtool_get_speed_duplex: Cannot get speed/duplex for wlan0: Not supported
Feb 16 12:11:01 r7800office daemon.info mstpd[493]: MSTP_OUT_set_state: br0:wlan0:0 entering forwarding state
Feb 16 12:11:01 r7800office daemon.info mstpd[493]: MSTP_OUT_set_ageing_time: br0:eth0 Setting new ageing time to 15
Feb 16 12:11:01 r7800office daemon.info mstpd[493]: MSTP_OUT_set_ageing_time: br0:eth1 Setting new ageing time to 15
Feb 16 12:11:01 r7800office daemon.info mstpd[493]: set_if_up: Port wlan0 : up
Feb 16 12:11:01 r7800office daemon.info mstpd[493]: error, ethtool_get_speed_duplex: Cannot get speed/duplex for wlan0: Not supported
Log from the WDS AP (I'm showing the affected station, only):
Feb 16 12:10:21 r7800master daemon.info hostapd: wlan0: STA 78:d2:94:c1:f3:42 WPA: group key handshake completed (RSN)
Feb 16 12:10:25 r7800master daemon.info hostapd: wlan0: STA 78:d2:94:4d:ab:8b WPA: group key handshake failed (RSN) after 4 tries
Feb 16 12:10:27 r7800master daemon.info hostapd: wlan0: STA 78:d2:94:4d:ab:8b MLME: auth request, signal -27 (Accepted)
Feb 16 12:10:27 r7800master daemon.info hostapd: wlan0: STA 78:d2:94:4d:ab:8b IEEE 802.11: authenticated
Feb 16 12:10:27 r7800master daemon.info hostapd: wlan0: STA 78:d2:94:4d:ab:8b MLME: assoc request, signal -27 (Accepted)
Feb 16 12:10:27 r7800master daemon.info hostapd: wlan0: STA 78:d2:94:4d:ab:8b IEEE 802.11: associated (aid 3)
Feb 16 12:10:27 r7800master daemon.info hostapd: wlan0: STA 78:d2:94:4d:ab:8b RADIUS: starting accounting session C2B60D6692A0DC65
Feb 16 12:10:27 r7800master daemon.info hostapd: wlan0: STA 78:d2:94:4d:ab:8b WPA: pairwise key handshake completed (RSN)
Linksys EA8500 gateway / AP
DD-WRT v3.0-r45735 std (02/11/21)
Linux 4.9.255 #1121 SMP Thu Feb 11 00:51:24 +07 2021 armv7l
WebUI upgrade over r45729
NO reset
Been up for about 5 days. Now when my lenovo laptops come out of sleep they are slow to reconnect and are missing internet access. other brands and desktops seem to be fine. Clicking Apply Settings on the Administration -> Management Tab allows the Lenovo laptops to regain full access.
WebUI on 2.4 does work better (loads completely more often)but still not as flawlessly as on 5 Ghz or wired.
Router/Version: TP-Link WNDR1043ND v1
File/Kernel: DD-WRT v3.0-r45735 std (02/11/21) / Linux 3.10.108-d10
Previous/Reset: Factory firmware / yes
Mode/Status: AP, normal LAN access on wlan0, guest network on wlan0.1
Issues/Errors: Works fine mostly, but wifi clients appear to loose connection every now and then.
When it is working, wifi access appears to be better than stock firmware. However at random moments wireless clients loose connection. The SSID is not visible anymore. Reboot fixes this, until the next dropout. Sometimes it runs a day without issues. Sometimes several reboots are required over the course of one afternoon.
Router/Version: TP-Link TL-WR941ND v6/v3
File/Kernel: 45735, tl-wr940ndv3-webflash.bin
Firmware: DD-WRT v3.0-r45735 std (02/11/21)
Kernel VersionLinux 3.18.140-d5 #104032 Tue Jan 19 05:43:58 +07 2021 mips
Previous/Reset: 45493 , no reset
Mode/Status: LAN and AP, router
Issues/Errors: took some minutes to get back active