Trinity2069 DD-WRT Novice
Joined: 05 Dec 2019 Posts: 1
|
Posted: Wed Mar 10, 2021 20:34 Post subject: RT-AC68U Serial help, not booting |
|
Hey Everyone,
I have a RT-AC68U that I flashed with the latest DD-WRT. The flash completed, but it does not boot. When you try pinging 192.168.1.1 it doesn't respond. It doesn't assign me an IP through DHCP and doesn't respond after I self assign an IP under the same subnet. I tried the 30/30/30, clearing NVRAM using WPS button, and other solutions but it still doesn't boot. I opened it up and connected it to my Raspberry PI using serial to try and do a NVRAM reset. It connects and I can see all the outputs, but I can't get it to the CFE prompt (ctrl c). I get a TFTP failure message somewhere in the output during boot. However, I can get onto root using default DD-WRT password. Any suggestions on how to fix this issue?
Thanks |
|