RT-AC68U Serial help, not booting

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
Trinity2069
DD-WRT Novice


Joined: 05 Dec 2019
Posts: 1

PostPosted: Wed Mar 10, 2021 20:34    Post subject: RT-AC68U Serial help, not booting Reply with quote
Hey Everyone,

I have a RT-AC68U that I flashed with the latest DD-WRT. The flash completed, but it does not boot. When you try pinging 192.168.1.1 it doesn't respond. It doesn't assign me an IP through DHCP and doesn't respond after I self assign an IP under the same subnet. I tried the 30/30/30, clearing NVRAM using WPS button, and other solutions but it still doesn't boot. I opened it up and connected it to my Raspberry PI using serial to try and do a NVRAM reset. It connects and I can see all the outputs, but I can't get it to the CFE prompt (ctrl c). I get a TFTP failure message somewhere in the output during boot. However, I can get onto root using default DD-WRT password. Any suggestions on how to fix this issue?

Thanks
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum