Posted: Sat Feb 27, 2021 18:16 Post subject: New Build - 02/27/2021 - r45859
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
pointless commit r45727 ruining ng-mixed, make sure to override it manually...
can you expand on that a little further? I have no idea how to override it. I’m still running 2020 builds but willing to try your work around if that’s what you are suggesting. Thank you in advance
Joined: 21 Jan 2017 Posts: 1783 Location: Illinois Moderator
Posted: Sun Feb 28, 2021 2:18 Post subject:
05dyna wrote:
tatsuya46 wrote:
pointless commit r45727 ruining ng-mixed, make sure to override it manually...
can you expand on that a little further? I have no idea how to override it. I’m still running 2020 builds but willing to try your work around if that’s what you are suggesting. Thank you in advance
I'll let him comment on the "fix" when using the dd-wrt wifi driver.
otherwise, use the vanilla driver and you won't need to run the fix. _________________ FORUM RULES
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sun Feb 28, 2021 2:52 Post subject:
05dyna wrote:
tatsuya46 wrote:
pointless commit r45727 ruining ng-mixed, make sure to override it manually...
can you expand on that a little further? I have no idea how to override it. I’m still running 2020 builds but willing to try your work around if that’s what you are suggesting. Thank you in advance
thats hostapd controlled telling the driver, unlikely to matter if its ddwrt fw or vanilla, but i cant test that cause the wireless basic settings page crashes httpd on x86_64 instantly.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 16 Nov 2015 Posts: 6435 Location: UK, London, just across the river..
Posted: Sun Feb 28, 2021 7:51 Post subject:
I ve no troubles with 2,4 Ghz on R7800 45859 (still on DDWRT) all kind of clients are connecting to it...Broadcom, Atheros, Mediatek, Intel...
no reset..
yep for some reason GUI is glitch'y since some builds...
I've no problems with other GUI's R7000 is fine as well 1043v2.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
pointless commit r45727 ruining ng-mixed, make sure to override it manually...
can you expand on that a little further? I have no idea how to override it. I’m still running 2020 builds but willing to try your work around if that’s what you are suggesting. Thank you in advance
thats hostapd controlled telling the driver, unlikely to matter if its ddwrt fw or vanilla, but i cant test that cause the wireless basic settings page crashes httpd on x86_64 instantly..
Tried this but made no difference, still can't see 5ghz using AC/N Mixed, reverted to mixed and 5ghz shows up.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sun Feb 28, 2021 21:33 Post subject:
James Greystone wrote:
tatsuya46 wrote:
05dyna wrote:
tatsuya46 wrote:
pointless commit r45727 ruining ng-mixed, make sure to override it manually...
can you expand on that a little further? I have no idea how to override it. I’m still running 2020 builds but willing to try your work around if that’s what you are suggesting. Thank you in advance
thats hostapd controlled telling the driver, unlikely to matter if its ddwrt fw or vanilla, but i cant test that cause the wireless basic settings page crashes httpd on x86_64 instantly..
Tried this but made no difference, still can't see 5ghz using AC/N Mixed, reverted to mixed and 5ghz shows up.
thats for 2.4ghz, nothing about 5ghz _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
pointless commit r45727 ruining ng-mixed, make sure to override it manually...
can you expand on that a little further? I have no idea how to override it. I’m still running 2020 builds but willing to try your work around if that’s what you are suggesting. Thank you in advance
thats hostapd controlled telling the driver, unlikely to matter if its ddwrt fw or vanilla, but i cant test that cause the wireless basic settings page crashes httpd on x86_64 instantly..
Tried this but made no difference, still can't see 5ghz using AC/N Mixed, reverted to mixed and 5ghz shows up.
Posted: Tue Mar 02, 2021 17:44 Post subject: R7800 issues
This seems to already have been reported but I'll add my 2 cents worth. I don't know what actually killed 2 of my routers but the issue is the same. I turned on a 5 GHz virtual AP and a 2.4 GHz AP and both routers died. The lights for 5 GHz and 2.4 GHz are on but the routers no longer function. The only way I could get them to work again was to reflash and restore to the settings I had before I activated the 5 G vap and 2.4 G ap. These 2 routers are normally operated as 5 GHz WDS Stations. I know there's a newer firmware available and I hope it fixes this issue. I probably won't get to flash the WDS AP with the newer firmware until tomorrow morning though.
