Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:
Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.
if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username
I have the same issue. I can't access Samba shares even using a user name and password on any Windows Pc. When I rolled back to r45767 everything works again.
@Abboo: You completely glazed over reading this in the next post under that.
BrainSlayer wrote:
if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username
I have enter all usernames I know and matching passwords, nothing works, dd-wrt username and password, windows administrator password and username; to log into my computer you must also enter the administrator password; nothing work.
I was trying to find if you had posted a screenshot of your samba configuration. That may help us figure out where the problem is, BUT there was a couple of commits to hopefully work around this issue in the next release:
Posted: Sat Feb 27, 2021 11:09 Post subject: R7000 DD-WRT v3.0-r45849 std (02/25/21)
Router Model
Netgear R7000
Firmware Version
DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version
Linux 4.4.258 #2133 SMP Wed Feb 24 11:29:36 +06 2021 armv7l
Uptime
17:28
CPU Clock
1400 MHz
Load Average
1%
0.02, 0.06, 0.01
Temperatures
CPU 65.8 °C / WL0 47.0 °C / WL1 53.0 °C
Firmware: v3.0-r45849 std (02/25/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.258 #2133 SMP Wed Feb 24 11:29:36 +06 2021 armv7l
Previous: v3.0-r45767 std (02/17/21)
Mode/Status: AP wired and wireless, Up and running for 1.5 days.
Reset: Soft boot before and after upgrade
Temperatures: CPU 56.9 °C / WL0 44.5 °C / WL1 49.7 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
There is a minor issue with the packet count on wl0.1 and "Connected Clients" stuck at zero. The wl0 and wl1 counts seem correct.
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Having added a user and password the results are still the same; I cannot access the shared network folder from Win7 explorer.
The guest access is broken even in r45859.
The fix so far for me was to add more users to your shares for each computer to have access to the shares. One account does not work over more than 1 computer since it is not allowed now.
So add another user name and password to your list in dd-wrt. Then click save and apply and I would suggest a reboot too of the router.
Then wait about 5 to 10 mins for the Samba service to boot and set itself up.
Then use the user name and password that is not being used on other systems. It will allow access this time.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Sat Feb 27, 2021 19:10 Post subject: New Build - 02/25/2021 - r45849
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.258 #7123 Thu Feb 25 17:01:46 +06 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: kern.warn kernel: br0: received packet on eth1 with own address as source address. It's repeated many times.
Status: Working
Uptime: ~45 h
I'm updated device via ssh. Generally router work rather good. I have problem with MACs still. I don't know how to fix that.