New Build - 02/25/2021 - r45849

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2779

PostPosted: Thu Feb 25, 2021 13:50    Post subject: New Build - 02/25/2021 - r45849 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r45820 (GitHub mirror)

Notes:
OpenVPN 2.5.1: Setup Guides, Server, PBR, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Setup Guides, Client, Server, Advanced, update tips, scripts and more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4. • Support added for TP-Link Archer C8 v2 and v3.
• Dnsmasq 2.84 • SmartDNS update • MiniDLNA 1.3.0 • Privoxy 3.0.31 • Unbound 1.13.1 CoovaChilli 1.6
In-kernel Samba (ksmbd 3.3.5+): default min/max versions changed. • WSD updated. • ANTFS/NTFS3 kernel mode drivers.

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs in 40562 - 40566. Effective startup commands discussion thread is here.
If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]


Last edited by blkt on Thu Feb 25, 2021 20:00; edited 4 times in total
Sponsor
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 175

PostPosted: Thu Feb 25, 2021 16:43    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45849 std (02/25/21)
Kernel: Linux 4.4.258 #2133 SMP Wed Feb 24 11:29:36 +06 2021 armv7l
Mode: Gateway, Wireless AP.
Reset: Nope.
Previous: 02-23-2021-r45820
Status: Working well so far, still testing.
Temperatures: CPU 55.2 °C / WL0 45.5 °C / WL1 51.1 °C



Logs.txt
 Description:
Full System Logs

Download
 Filename:  Logs.txt
 Filesize:  142.08 KB
 Downloaded:  20 Time(s)

Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 170

PostPosted: Thu Feb 25, 2021 17:59    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below

Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:

Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 468

PostPosted: Thu Feb 25, 2021 18:27    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45849 std (02/25/21)
Kernel: Linux 4.4.258 #2133 SMP Wed Feb 24 11:29:36 +06 2021 armv7l
Previous: r45820
Mode/Status: Gateway / working
Issues/Errors: Working well so far.

Uptime: 54mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 66.9 °C / WL0 46.5 °C / WL1 52.5 °C
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 201
Location: Maine, USA

PostPosted: Thu Feb 25, 2021 19:39    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-45849_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r45849 mega (02/25/21)
Kernel: Linux 4.4.258 #7139 Thu Feb 25 17:25:00 +06 2021 mips
Mode: Gateway/USB
Previous: r45735
Reset?: N
Status: Working

Router/Version: Linksys E3200
File: dd-wrt.v24-45849_NEWD-2_K3.x_mega-e3200.bin
Firmware: DD-WRT v3.0-r45849 mega (02/25/21)
Kernel: Linux 4.4.258 #7139 Thu Feb 25 17:25:00 +06 2021 mips
Mode: Guest Gateway/QOS
Previous: r45735
Reset?: N
Status: Working
CtrlAltBeer
DD-WRT Novice


Joined: 23 Feb 2021
Posts: 13

PostPosted: Thu Feb 25, 2021 20:50    Post subject: Reply with quote
Router/Version: Asus RT-AC88U / v3.0-r45849 std (02/25/21)
File/Kernel: Linux version 4.4.258 (root@linux) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #2138 SMP Thu Feb 25 10:36:40 +06 2021
Previous: r45767 (same issue)
Reset: yes
Reboot: yes
Mode: Gateway (Router tested)
Status: Stable except for the following:
Issues/Errors: Devices cannot connect to WLAN if interface both is bridged and has wireless security enabled. Occurs whether using VAPs or not.
To Reproduce: from fresh install:
Quote:
nvram set rc_startup='
#!/bin/ash
PATH="/sbin:/usr/sbin:/bin:/usr/bin:${PATH}"

brctl addbr br10
ifconfig br10 192.168.10.1 netmask 255.255.255.0
brctl delif br0 eth1
brctl addif br10 eth1

rc restart

# Included for completeness but has only minor effect
sleep 20; stopservice nas; wlconf eth1 down; wlconf eth2 down; wlconf eth1 up; wlconf eth2 up; startservice nas; logger "VAP workaround executed";
'


GUI:
- Dnsmasq additional settings:
interface=br10
dhcp-range=192.168.10.100,192.168.10.128,255.255.255.0,3600

- Wireless:
Disable wl1 (5Ghz) to ensure connection to correct interface

Steps:
    1) Reboot
    2) Connect to bridged, insecure WAP - successful
    3) Change wl0 wireless security to any security mode except Disabled (e.g.: WPA2-PSK (TKIP))
    4) Reconnect to bridged, secure WAP - fails.
    Logging:
    /tmp/var/log/messages: "dhd_flow_rings_delete_for_peer: ifindex 0"
    PuTTY via TTL serial cable: "CONSOLE: 027092.058 wl0: Proxy STA [device mac] link is already gone !!??"
    5) Return wireless interface back to br0: brctl delif br10 eth1; brctl addif br0 eth1
    6) Reconnect to unbridged, secure WAP - successful

Notes:
- If 'stopservice nas; wlconf eth1 down... etc.' is not included, output in PuTTY from step 4 does not appear.
- Symptoms are identical if a VAP is set up instead of the eth1 interface
- There are also reports of Broadcom bridge / security issues going back to 2010 although all the issues I have found related to VAPs, which do not (necessarily) seem relevant here
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7117
Location: Dresden, Germany

PostPosted: Fri Feb 26, 2021 5:57    Post subject: Reply with quote
Abboo wrote:
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below

Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:

Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.


i seriously have no idea what you are talking about

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7117
Location: Dresden, Germany

PostPosted: Fri Feb 26, 2021 6:26    Post subject: Reply with quote
Abboo wrote:
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below

Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:

Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.


if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 53

PostPosted: Fri Feb 26, 2021 7:33    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45849 std (02/25/21)
Kernel: Linux 4.4.258 #2133 SMP Wed Feb 24 11:29:36 +06 2021 armv7l
Mode: Gateway, Wireless AP, OpenVPN Client, FlashRouters KillSwitch
Reset: No
Previous: r45229
Uptime: 4:52 hours
Load: 0.05, 0.07, 0.02
Temperatures: CPU 65.2 °C / WL0 48.0 °C / WL1 50.0 °C
Status: Performance is solid, thanks!

_________________
My DD-WRT Routers:
Linksys/Marvell WRT1900ACSv2 (r46316)
Linksys/Marvell WRT1900ACSv1 (r44048 - for Apple issue)
Netgear/Broadcom R7000 (3x: r45928)
Linksys/Broadcom WRT54G/GS (4x: r44715)
imraniden
DD-WRT Novice


Joined: 25 Feb 2021
Posts: 6

PostPosted: Fri Feb 26, 2021 8:56    Post subject: Reply with quote
Hello,

A quiet new on this forum and also into upgrading routers this was my first upgrade

I'm going through few issues currently

01 after i finished the upgrading and did the reset i couldn't find lan connection so i managed solve that by changing that from command prompt on my Windows 10


02 after doing the basic settings and ip configuration Internet wouldn't work after i changed the settings from command prompt from dns to dchp my net starting working.

03 also if i change any settings i lose my connection again from wifi


Also if i made i mistake in giving out the details do let me know I'll correct it



E1200v2 /Version:R45849
File/Kernel: 4.4
Previous/Reset:44715
Mode/Status:gateway
Issues/Errors:lan access,Internet
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 170

PostPosted: Fri Feb 26, 2021 13:06    Post subject: Reply with quote
BrainSlayer wrote:
Abboo wrote:
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below

Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:

Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.


i seriously have no idea what you are talking about


From Windows explorer, click on network and in the section labeled 'Media devices', click on dd-wrt. It opens and allows you to access your files.
From Windows explorer, click on network and in the section labeled 'computer', click on dd-wrt. A window pops up asking for username and password. This only occurred when the error message started: Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:



Windows security.png
 Description:
 Filesize:  154.43 KB
 Viewed:  1171 Time(s)

Windows security.png



Media player.png
 Description:
 Filesize:  168.74 KB
 Viewed:  1171 Time(s)

Media player.png


kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8359
Location: Texas, USA

PostPosted: Fri Feb 26, 2021 13:44    Post subject: Reply with quote
@Abboo: You completely glazed over reading this in the next post under that.

BrainSlayer wrote:
if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 170

PostPosted: Fri Feb 26, 2021 13:54    Post subject: Reply with quote
kernel-panic69 wrote:
@Abboo: You completely glazed over reading this in the next post under that.

BrainSlayer wrote:
if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username


I have enter all usernames I know and matching passwords, nothing works, dd-wrt username and password, windows administrator password and username; to log into my computer you must also enter the administrator password; nothing work.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8359
Location: Texas, USA

PostPosted: Fri Feb 26, 2021 14:10    Post subject: Reply with quote
Abboo wrote:
kernel-panic69 wrote:
@Abboo: You completely glazed over reading this in the next post under that.

BrainSlayer wrote:
if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username


I have enter all usernames I know and matching passwords, nothing works, dd-wrt username and password, windows administrator password and username; to log into my computer you must also enter the administrator password; nothing work.


I was trying to find if you had posted a screenshot of your samba configuration. That may help us figure out where the problem is, BUT there was a couple of commits to hopefully work around this issue in the next release:

https://svn.dd-wrt.com/changeset/45852

https://svn.dd-wrt.com/changeset/45853

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 7428
Location: Netherlands

PostPosted: Fri Feb 26, 2021 14:23    Post subject: Reply with quote
Just tested those commits but no Sad
Keeps asking for a credential with user admin.

If I make a user admin in Samba/users with same credentials as it has in ddwrt I can actually write to my ext4 formatted share but trying to copy it back no go Sad
I do use a torture test writing 1.3 GB data with about 1000 files big and small.

The only reliable way to use a NAS is with ext4 formatted drive and using the old Samba36 but that could just be me doing something stupid (that is what the wife always tells me LoL )

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum