Posted: Thu Feb 25, 2021 13:50 Post subject: New Build - 02/25/2021 - r45849
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Posted: Thu Feb 25, 2021 16:43 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r45849 std (02/25/21) Kernel: Linux 4.4.258 #2133 SMP Wed Feb 24 11:29:36 +06 2021 armv7l Mode: Gateway, Wireless AP. Reset: Nope. Previous: 02-23-2021-r45820 Status: Working well so far, still testing. Temperatures: CPU 55.2 °C / WL0 45.5 °C / WL1 51.1 °C
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:
Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Thu Feb 25, 2021 19:39 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-45849_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r45849 mega (02/25/21)
Kernel: Linux 4.4.258 #7139 Thu Feb 25 17:25:00 +06 2021 mips
Mode: Gateway/USB
Previous: r45735
Reset?: N
Status: Working
Router/Version: Linksys E3200
File: dd-wrt.v24-45849_NEWD-2_K3.x_mega-e3200.bin
Firmware: DD-WRT v3.0-r45849 mega (02/25/21)
Kernel: Linux 4.4.258 #7139 Thu Feb 25 17:25:00 +06 2021 mips
Mode: Guest Gateway/QOS
Previous: r45735
Reset?: N
Status: Working
Router/Version: Asus RT-AC88U / v3.0-r45849 std (02/25/21)
File/Kernel: Linux version 4.4.258 (root@linux) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #2138 SMP Thu Feb 25 10:36:40 +06 2021
Previous: r45767 (same issue)
Reset: yes
Reboot: yes
Mode: Gateway (Router tested)
Status: Stable except for the following:
Issues/Errors: Devices cannot connect to WLAN if interface both is bridged and has wireless security enabled. Occurs whether using VAPs or not.
To Reproduce: from fresh install:
Quote:
nvram set rc_startup='
#!/bin/ash
PATH="/sbin:/usr/sbin:/bin:/usr/bin:${PATH}"
- Wireless:
Disable wl1 (5Ghz) to ensure connection to correct interface
Steps:
1) Reboot
2) Connect to bridged, insecure WAP - successful
3) Change wl0 wireless security to any security mode except Disabled (e.g.: WPA2-PSK (TKIP))
4) Reconnect to bridged, secure WAP - fails.
Logging:
/tmp/var/log/messages: "dhd_flow_rings_delete_for_peer: ifindex 0"
PuTTY via TTL serial cable: "CONSOLE: 027092.058 wl0: Proxy STA [device mac] link is already gone !!??"
5) Return wireless interface back to br0: brctl delif br10 eth1; brctl addif br0 eth1
6) Reconnect to unbridged, secure WAP - successful
Notes:
- If 'stopservice nas; wlconf eth1 down... etc.' is not included, output in PuTTY from step 4 does not appear.
- Symptoms are identical if a VAP is set up instead of the eth1 interface
- There are also reports of Broadcom bridge / security issues going back to 2010 although all the issues I have found related to VAPs, which do not (necessarily) seem relevant here
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Fri Feb 26, 2021 5:57 Post subject:
Abboo wrote:
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:
Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.
i seriously have no idea what you are talking about _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Fri Feb 26, 2021 6:26 Post subject:
Abboo wrote:
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:
Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.
if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
A quiet new on this forum and also into upgrading routers this was my first upgrade
I'm going through few issues currently
01 after i finished the upgrading and did the reset i couldn't find lan connection so i managed solve that by changing that from command prompt on my Windows 10
02 after doing the basic settings and ip configuration Internet wouldn't work after i changed the settings from command prompt from dns to dchp my net starting working.
03 also if i change any settings i lose my connection again from wifi
Also if i made i mistake in giving out the details do let me know I'll correct it
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45849 std (02/25/21)
Kernel Version: Linux 4.4.258 #2141 SMP Thu Feb 25 10:57:00 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45820 std (02/23/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 3 min
Temperatures: CPU 47.5 °C
Errors: as reported in the syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:20 DD-WRT user.err wsdd2[1193]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1205]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 25 13:32:36 DD-WRT user.err wsdd2[1193]: Terminated received.
Feb 25 13:32:36 DD-WRT local5.err ksmbd: [ksmbd-manager/1204]: ERROR: WARNING: child process exited abnormally: 1205
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 25 13:32:38 DD-WRT local5.err ksmbd: [ksmbd-worker/2453]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 25 13:32:41 DD-WRT local5.err ksmbd: [ksmbd-manager/2787]: ERROR: Failed to create lock file: File exists
Feb 25 13:33:13 DD-WRT daemon.err httpd[1417]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:
Username and password required to access files across the network relative to the ‘share’ folder.
The said files can be access via ‘media devices’.
i seriously have no idea what you are talking about
From Windows explorer, click on network and in the section labeled 'Media devices', click on dd-wrt. It opens and allows you to access your files.
From Windows explorer, click on network and in the section labeled 'computer', click on dd-wrt. A window pops up asking for username and password. This only occurred when the error message started: Feb 25 13:45:04 DD-WRT local5.err ksmbd: [ksmbd-worker/3474]: ERROR: treecon: user account not found:
@Abboo: You completely glazed over reading this in the next post under that.
BrainSlayer wrote:
if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username
I have enter all usernames I know and matching passwords, nothing works, dd-wrt username and password, windows administrator password and username; to log into my computer you must also enter the administrator password; nothing work.
Joined: 08 May 2018 Posts: 14217 Location: Texas, USA
Posted: Fri Feb 26, 2021 14:10 Post subject:
Abboo wrote:
kernel-panic69 wrote:
@Abboo: You completely glazed over reading this in the next post under that.
BrainSlayer wrote:
if in guest if you are asked for user account. wenn known windows behaviour. you are trying to forcefully authenticate with a empty username
I have enter all usernames I know and matching passwords, nothing works, dd-wrt username and password, windows administrator password and username; to log into my computer you must also enter the administrator password; nothing work.
I was trying to find if you had posted a screenshot of your samba configuration. That may help us figure out where the problem is, BUT there was a couple of commits to hopefully work around this issue in the next release:
Joined: 18 Mar 2014 Posts: 12882 Location: Netherlands
Posted: Fri Feb 26, 2021 14:23 Post subject:
Just tested those commits but no
Keeps asking for a credential with user admin.
If I make a user admin in Samba/users with same credentials as it has in ddwrt I can actually write to my ext4 formatted share but trying to copy it back no go
I do use a torture test writing 1.3 GB data with about 1000 files big and small.
