New Build - 11/03/2020 - r44715

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Tue Nov 03, 2020 19:01    Post subject: New Build - 11/03/2020 - r44715 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r44700 (GitHub mirror)

Notes:
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WireGuard 1.0.20200908 & Tools: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks BS & egc!
• OpenVPN Version 2.5.0

Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Tue Nov 03, 2020 19:25    Post subject: Reply with quote
Update method: SSH
Router/Version: Netgear Nighthawk X10
File/Kernel: DD-WRT v3.0-r44715 std (11/03/20)
Previous/Reset: DD-WRT v3.0-r44700 std (10/30/20) / No
Mode/Status: Gateway
Issues/Errors: None

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Nov 03, 2020 20:22    Post subject: Reply with quote
Router Model: dir-862L(x2), wndr4300, x86_64(2x qca9984 ,1x qca9882)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154
https://svn.dd-wrt.com/ticket/7216 *
https://svn.dd-wrt.com/ticket/7222 *
https://svn.dd-wrt.com/ticket/7226
https://svn.dd-wrt.com/ticket/7246
https://svn.dd-wrt.com/ticket/7257 *

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Wed Nov 04, 2020 9:08    Post subject: Reply with quote
So I flashed 2x r7800 with r44715 last night

this morning I flashed the 3rd with r44715 - but now it shows r44719

what is this ? several images were overwritten with a different build number during the night
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Wed Nov 04, 2020 9:32    Post subject: Reply with quote
Strange things are afoot at the Circle K. Seven routers updated on 04-Nov-2020.

asrock g10, linksys ea8500, wrt1200ac, netgear r7500v1, r7500v2, r7800, xr450, xr500

https://svn.dd-wrt.com/changeset/44716
https://svn.dd-wrt.com/changeset/44717
https://svn.dd-wrt.com/changeset/44718
https://svn.dd-wrt.com/changeset/44719
CantRepeat
DD-WRT User


Joined: 18 Oct 2017
Posts: 153

PostPosted: Wed Nov 04, 2020 14:00    Post subject: Reply with quote
Auto building with each committed change set?
_________________
-Tim
ArjenR49
DD-WRT Guru


Joined: 05 Oct 2008
Posts: 666
Location: Helsinki, Finland / nr. Alkmaar, Netherlands

PostPosted: Thu Nov 05, 2020 19:13    Post subject: Reply with quote
WZR-HP-G300NH updated via TFTP from build 44627.
LAN clients use PiHole+Unbound DNS server on Raspberry Pi Zero 1.3.
It is not a powerhouse, but it runs fine.
Opening the Bandwidth page runs up the CPU usage to 100% in a few minutes, just as the previous versions used to do. This time I happened to have an hours long, slow rsync upload to a remote server going on at the same time. The router nor the upload crashed, but I didn't wait for a crash and closed the bandwidth tab.
The watchdog setting in the GUI is set for checking connectivity to the wideband cable modem's address and two public DNS servers on the internet every 900 seconds.
I should try causing a reboot by the watchdog at some later point in time by keeping the bandwith tab open.
ddaniel51
DD-WRT Guru


Joined: 19 Feb 2013
Posts: 1464

PostPosted: Fri Nov 06, 2020 9:05    Post subject: Reply with quote
Running OK on the 5 R9000's with 33 DHCP clients.
_________________
Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
ArjenR49
DD-WRT Guru


Joined: 05 Oct 2008
Posts: 666
Location: Helsinki, Finland / nr. Alkmaar, Netherlands

PostPosted: Fri Nov 06, 2020 11:10    Post subject: Reply with quote
ArjenR49 wrote:
WZR-HP-G300NH updated via TFTP from build 44627.
LAN clients use PiHole+Unbound DNS server on Raspberry Pi Zero 1.3.
It is not a powerhouse, but it runs fine.
Opening the Bandwidth page runs up the CPU usage to 100% in a few minutes, just as the previous versions used to do.
...
The watchdog setting in the GUI is set for checking connectivity to the wideband cable modem's address and two public DNS servers on the internet every 900 seconds.

...


Even at 100% CPU Load Average for more than 15 minutes, the router remained useable and didn't crash or reboot.
Actually it see-saws between 50-60 and 100% ...
chaski
DD-WRT Novice


Joined: 02 Nov 2020
Posts: 20

PostPosted: Sat Nov 07, 2020 19:00    Post subject: Reply with quote
So far, everything fine except:

-Reboots after applying settings most of the time (without request)

- Can't save static leases
xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 134

PostPosted: Tue Nov 17, 2020 7:05    Post subject: Reply with quote
Router Model / Version: Netgear XR500
Previous Firmware:DD-WRT v3.0-r44700 std (10/30/20)
Current Firmware: DD-WRT v3.0-r44719 std (11/04/20)
Kernel: Linux 4.9.241 #757 SMP Wed Nov 4 04:13:33 +03 2020 armv7l
Reset: No
Mode: AP, Operating - Router
Setup: Just an Acces Point, Syslog, SSH
Uptime: up 1 day, 50 min, load average: 0.00, 0.00, 0.00
Temperature: CPU 49.121 °C / ath0 40 °C / ath1 42 °C
Status: OK
Issues: None


Router Model / Version: Linksys EA8500
Previous Firmware:DD-WRT v3.0-r44700 std (10/30/20)
Current Firmware: DD-WRT v3.0-r44719 std (11/04/20)
Kernel: Linux 4.9.241 #755 SMP Wed Nov 4 03:59:02 +03 2020 armv7l
Reset: No
Mode: Wireless - Client, Operating - Gateway
Setup: SFE, NTP, DDNS (inadyn-Entware), DNSMasq (GUI+ additional options on USB, Syslog, SSH,FreeRadius, Telnet, USB, ProFTPD (with users), Samba (with users), CoovaChilli (with local users & radius), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: up 1 day, 48 min, load average: 0.00, 0.02, 0.03
Temperature: CPU 58.487 °C / ath0 48 °C / ath1 50 °C
Status: OK
Issues: None


Router Model / Version: Netgear WNDR3700v1
Previous Firmware: D-WRT v3.0-r44700 std (10/30/20)
Current Firmware: DD-WRT v3.0-r44715 std (11/03/20)
File: dd-wrt-webflash.bin
Kernel: Linux 3.10.108-d10 #63182 Tue Nov 3 05:17:50 +03 2020 mips
Reset: No
Mode: Wireless - Client, Operating - Router
Setup: NTP, DNSMasq, Syslog, SSH, Telnet, Remote Access (HTTPS & SSH)
Uptime:
    Router #1 up 1 day, 53 min, load average: 0.07, 0.03, 0.04

Status: OK
Issues: None

Just want to say thanks once again to BS. Very Happy
ado
DD-WRT Novice


Joined: 31 Oct 2018
Posts: 6

PostPosted: Sun Feb 14, 2021 16:32    Post subject: Reply with quote
Router Model / Version: TP-Link N750 / WDR4300 v7
Previous Firmware: DD-WRT v3.0-r37305
Current Firmware: DD-WRT v3.0-r44715
Setup: Infrastructure, Wan on Eth (no auth), Dual Wifi, WPA2 128, NAT, Web GUI w SSL, SSH, NTP, DHCP on Lan
Status: OK

Some notes:

- I've upgraded through WebGUI with reset to defaults option
- ping responded after approx 5min, no GUI until restart
- after initial pwd change WebGUI was not able to reload/redirect automatically, I needed to reopen the session
- so far so good, I just run quick config as infrastructure with dhcp on Wan, set wireless & wpa2 personal with 128bit key
- in short range I got approx. 80mbit throughput on iPad measured by ookla
- sshd did not work until I checked also tcp forwarding
DownUnder77
DD-WRT Novice


Joined: 04 Aug 2022
Posts: 1

PostPosted: Thu Aug 04, 2022 4:20    Post subject: Reply with quote
Router/Version: TP-Link TL-WR841ND v7

Firmware: DD-WRT v3.0-r44715 std (11/03/20)

Kernel: Linux 3.10.108-d10 #63156 Tue Nov 3 03:37:04 +03 2020 mips

Previous: v24-sp2 (12/24/10) std

Mode/Status: 2.4Ghz AP,small home LAN, no WAN, router now working as expected... Uptime now 8+ days.

Issues/Errors: Upgrade carried to overcome slowness of the old GUI and necessary resets. No firmware issues since the upgrade.

Upgrade: via web UI

Many thanks to the maintainers and dd-wrt.com !
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Thu Aug 04, 2022 4:33    Post subject: Reply with quote
DownUnder77 wrote:
Router/Version: TP-Link TL-WR841ND v7

Firmware: DD-WRT v3.0-r44715 std (11/03/20)

Kernel: Linux 3.10.108-d10 #63156 Tue Nov 3 03:37:04 +03 2020 mips

Previous: v24-sp2 (12/24/10) std

Mode/Status: 2.4Ghz AP,small home LAN, no WAN, router now working as expected... Uptime now 8+ days.

Issues/Errors: Upgrade carried to overcome slowness of the old GUI and necessary resets. No firmware issues since the upgrade.

Upgrade: via web UI

Many thanks to the maintainers and dd-wrt.com !

Atheros WiSOC based Hardware -> New Build - 08/03/2022 - r49626 -> tplink_tl-wr841ndv7 (website, ftp)
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum